Signed-off-by: NDave Airlie <airlied@redhat.com>

* korg/drm-nvidia-switch-fixes:
  mxm/wmi: add MXMX interface entry point.
  nouveau: add optimus detection to DSM code.
  vgaarb: use bridges to control VGA routing where possible.
  nouveau/acpi: hook up to the MXM method for mux switching.
  platform/x86: add MXM WMI driver.

The virtual i2c to real i2c channel mappings weren't setting
the right id in some cases.

Spotted by: Andrew Randrianasulu
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The MXMX method appears to be a mutex of some sort.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is unbalanced and probably more fitting for the client
to take care of.  Remove it.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

optimus has another DSM GUID, so we check for its existance,
also allow the BIOS stuff is we find it.
Signed-off-by: NDave Airlie <airlied@redhat.com>

So in a lot of modern systems, a GPU will always be below a parent bridge that won't share with any other GPUs. This means VGA arbitration on those GPUs can be controlled by using the bridge routing instead of io/mem decodes.

The problem is locating which GPUs share which upstream bridges. This patch attempts to identify all the GPUs which can be controlled via bridges, and ones that can't. This patch endeavours to work out the bridge sharing semantics.

When disabling GPUs via a bridge, it doesn't do irq callbacks or touch the io/mem decodes for the gpu.
Signed-off-by: NDave Airlie <airlied@redhat.com>

this hooks up nouveau to the MXM mux switching method.

With this in place I can switch the LVDS MUX on my T410s,
I expect we need a bit more work for other laptops.
Signed-off-by: NDave Airlie <airlied@redhat.com>

MXM is a laptop graphics card form-factor + interface specification,
this adds an initial stub driver to talk to the MXM WMI interface.

The only method used is the MUX switching method needed to do switchable
graphics on the nvidia chipsets.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>

Fix the vbios mapping and only add the actual
buses that the cards have.  The existing code was
mostly correct.  Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The most common use of the radeon i2c buses is for ddc.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The previous commit to move the parsing into the core drm created a
new situation and a soft dependency on the CONFIG_FB. We really don't
want to make this a hard dependency so just wrap the one place that
actually needs an fb symbol.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In the absence of configuration data for providing the fixed mode for
a panel, I would like to be able to pass such modes along a separate
module paramenter. To do so, I then need to parse a modeline from a
string, which drm is already capable of. Export that capability to the
drivers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add __attribute__((format (printf, 4, 5))) to drm_ut_debug_printk
and fix fallout.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reduce drm text size ~1% by using drm_err and
printf extension %pV to emit error messages.

Remove unused macro DRM_MEM_ERROR.

$ size drivers/gpu/drm/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 361159	   9663	    256	 371078	  5a986	drivers/gpu/drm/built-in.o.new
 365416	   9663	    256	 375335	  5ba27	drivers/gpu/drm/built-in.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to hold the dev->mode_config.mutex whilst detecting the output
status. But we also need to drop it for the call into
drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when
attaching the fbcon.

Failure to do so exposes a race with normal output probing. Detected by
adding some warnings that the mutex is held to the backend detect routines:

[   17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]()
[   17.772458] Hardware name: Latitude E6400
[   17.772460] Modules linked in: ....
[   17.772582] Pid: 11, comm: kworker/0:1 Tainted: G        W 2.6.38.4-custom.2 #8
[   17.772584] Call Trace:
[   17.772591]  [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c
[   17.772603]  [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915]
[   17.772612]  [<ffffffffa0355d49>] ?  drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper]
[   17.772619]  [<ffffffffa03534d5>] ?  drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper]
[   17.772625]  [<ffffffffa0354760>] ?  drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper]
[   17.772633]  [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper]
[   17.772638]  [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345
[   17.772644]  [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper]
[   17.772648]  [<ffffffff8105b540>] ? process_one_work+0x193/0x28e
[   17.772652]  [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172
[   17.772655]  [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[   17.772658]  [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172
[   17.772663]  [<ffffffff8105f767>] ? kthread+0x7a/0x82
[   17.772668]  [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10
[   17.772671]  [<ffffffff8105f6ed>] ? kthread+0x0/0x82
[   17.772674]  [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10
Reported-by: NFrederik Himpe <fhimpe@telenet.be>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36394Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID 1.4 digital displays report the color spaces they support in the
features block.  Add support for grabbing this data and stuffing it into
the display_info struct for driver use.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID 1.4 digital monitors report the bit depth supported in the input
field.  Add support for parsing this out and storing the info in the
display_info structure for use by drivers.

[airlied: tweaked to fix inter-patch dependency]
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

i915 calls the panic handler function on last close to reset the modes,
however this is a really bad idea for multi-gpu machines, esp shareable
gpus machines. So add a new entry point for the driver to just restore
its own fbcon mode.

v2: move code into fb helper, fix panic code to block mode change on
powered off GPUs.

[airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx
 so really I signed it off twice ;-).]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

needed by mesa for htile setup.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

needed for HiS in mesa.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Multi-gpu/switcheroo relies on this option to get the console on the
correct GPU at bootup, some distros enable it but it seems some get
it wrong.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The EXPERT menu list was recently broken by the insertion of a
kconfig symbol (EMBEDDED) at the beginning of the EXPERT list of
kconfig items.  Broken by:

  commit 6a108a14
  Author: David Rientjes <rientjes@google.com>
  Date:   Thu Jan 20 14:44:16 2011 -0800
    kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT

Restore the EXPERT menu list -- don't inject a symbol (EMBEDDED)
that does not depend on EXPERT into the list.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Foley <pefoley2@verizon.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Erratum #637 workaround
  amd64_edac: Factor in CC6 save area
  amd64_edac: Remove node interleave warning
  EDAC: Remove debugging output in scrub rate handling

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel Panther Point PCH

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] kvm-390: Let kernel exit SIE instruction on work
  [S390] dasd: check sense type in device change handler
  [S390] pfault: fix token handling
  [S390] qdio: reset error states immediately
  [S390] fix page table walk for changing page attributes
  [S390] prng: prevent access beyond end of stack
  [S390] dasd: fix race between open and offline

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: cleanup error handling in inode.c
  Btrfs: put the right bio if we have an error
  Btrfs: free bitmaps properly when evicting the cache
  Btrfs: Free free_space item properly in btrfs_trim_block_group()
  btrfs: add missing spin_unlock to a rare exit path
  Btrfs: check return value of kmalloc()
  btrfs: fix wrong allocating flag when reading page
  Btrfs: fix missing mutex_unlock in btrfs_del_dir_entries_in_log()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: do some plugging in the submit_bio threads

F15h CPUs may report a non-DRAM address when reporting an error address
belonging to a CC6 state save area. Add a workaround to detect this
condition and compute the actual DRAM address of the error as documented
in the Revision Guide for AMD Family 15h Models 00h-0Fh Processors.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

F15h and later use a portion of DRAM as a CC6 storage area. BIOS
programs D18F1x[17C:140,7C:40] DRAM Base/Limit accordingly by
subtracting the storage area from the DRAM limit setting. However, in
order for edac to consider that part of DRAM too, we need to include it
into the per-node range.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This warning was wrongfully added for a normal condition - intlvsel
actually selects the destination node when node interleaving is enabled
and it is not a mismatch. For a detailed example, see section 2.8.10.2
"Node Interleaving" in F10h BKDG.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  CIFS: Fix memory over bound bug in cifs_parse_mount_options

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Flush dirty pages in setattr
  eCryptfs: Handle failed metadata read in lookup
  eCryptfs: Add reference counting to lower files
  eCryptfs: dput dentries returned from dget_parent
  eCryptfs: Remove extra d_delete in ecryptfs_rmdir

Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  rtc: fix coh901331 startup crash
  mach-ux500: fix i2c0 device setup regression

Now that the security modules can decide whether they support the
dcache RCU walk or not it's possible to make selinux a bit more
RCU friendly.  The SELinux AVC and security server access decision
code is RCU safe.  A specific piece of the LSM audit code may not
be RCU safe.

This patch makes the VFS RCU walk retry if it would hit the non RCU
safe chunk of code.  It will normally just work under RCU.  This is
done simply by passing the VFS RCU state as a flag down into the
avc_audit() code and returning ECHILD there if it would have an issue.
Based-on-patch-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets.  Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>