There are cases when the filesystem will be passed the buffer from a single
read or write call, namely:

 1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go
    through the page cache, but go directly to the userspace fs

 2) currently buffered writes are done with single page requests, but
    if Nick's ->perform_write() patch goes it, it will be possible to
    do larger write requests.  But only if the original write() was
    also bigger than a page.

In these cases the filesystem might want to give a hint to the app
about the optimal I/O size.

Allow the userspace filesystem to supply a blksize value to be returned by
stat() and friends.  If the field is zero, it defaults to the old
PAGE_CACHE_SIZE value.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each WRITE request must carry a valid file descriptor.  When a page is written
back from a memory mapping, the file through which the page was dirtied is not
available, so a new mechananism is needed to find a suitable file in
->writepage(s).

A list of fuse_files is added to fuse_inode.  The file is removed from the
list in fuse_release().

This patch is in preparation for writable mmap support.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single
request, instead of separate truncate and open requests.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add necessary protocol changes for supplying a file handle with the getattr
operation.  Step the API version to 7.9.

This patch doesn't actually supply the file handle, because that needs some
kind of VFS support, which we haven't yet been able to agree upon.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Getattr and lookup operations can be running in parallel to attribute changing
operations, such as write and setattr.

This means, that if for example getattr was slower than a write, the cached
size attribute could be set to a stale value.

To prevent this race, introduce a per-filesystem attribute version counter.
This counter is incremented whenever cached attributes are modified, and the
incremented value stored in the inode.

Before storing new attributes in the cache, getattr and lookup check, using
the version number, whether the attributes have been modified during the
request's lifetime.  If so, the returned attributes are not cached, because
they might be stale.

Thanks to Jakub Bogusz for the bug report and test program.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Jakub Bogusz <jakub.bogusz@gemius.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following operation didn't check if sending the request was allowed:

  setattr
  listxattr
  statfs

Some other operations don't explicitly do the check, but VFS calls
->permission() which checks this.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The VFS checks sticky bits on the parent directory even if the filesystem
defines it's own ->permission().  In some situations (sshfs, mountlo, etc) the
user does have permission to delete a file even if the attribute based
checking would not allow it.

So work around this by storing the permission bits separately and returning
them in stat(), but cutting the permission bits off from inode->i_mode.

This is slightly hackish, but it's probably not worth it to add new
infrastructure in VFS and a slight performance penalty for all filesystems,
just for the sake of fuse.

[Jan Engelhardt] cosmetic fixes
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Aufs seems to depend on a positive i_nlink value.  So fill in a dummy but sane
value for the root inode at mount time.

The inode attributes are refreshed with the correct values at the first
opportunity.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Other than truncate, there are two cases, when fuse tries to get rid
of cached pages:

 a) in open, if KEEP_CACHE flag is not set
 b) in getattr, if file size changed spontaneously

Until now invalidate_mapping_pages() were used, which didn't get rid
of mapped pages.  This is wrong, and becomes more wrong as dirty pages
are introduced.  So instead properly invalidate all pages with
invalidate_inode_pages2().
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory mappings were only truncated on an explicit truncate, but not when the
file size was changed externally.

Fix this by moving the truncation code from fuse_setattr to
fuse_change_attributes.

Yes, there are races between write and and external truncation, but we can't
really do anything about them.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use wake_up_all instead of wake_up in put_reserved_req(), otherwise it is
possible that the right task is not woken up.

Also create a separate reserved_req_waitq in addition to the blocked_waitq,
since they fulfill totally separate functions.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

provide BDI constructor/destructor hooks

[akpm@linux-foundation.org: compile fix]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

fs/fuse/inode.c:658:3: error: Initializer entry defined twice
fs/fuse/inode.c:661:3:   also defined here
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When inode is dropped (no more references) delete it from cache.

There's not much point in keeping it cached, when a new lookup will refresh
the attributes anyway.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a slight problem with filesystem type representation in fuse
based filesystems.

From the kernel's view, there are just two filesystem types: fuse and
fuseblk.  From the user's view there are lots of different filesystem
types.  The user is not even much concerned if the filesystem is fuse based
or not.  So there's a conflict of interest in how this should be
represented in fstab, mtab and /proc/mounts.

The current scheme is to encode the real filesystem type in the mount
source.  So an sshfs mount looks like this:

  sshfs#user@server:/   /mnt/server    fuse   rw,nosuid,nodev,...

This url-ish syntax works OK for sshfs and similar filesystems.  However
for block device based filesystems (ntfs-3g, zfs) it doesn't work, since
the kernel expects the mount source to be a real device name.

A possibly better scheme would be to encode the real type in the type
field as "type.subtype".  So fuse mounts would look like this:

  /dev/hda1       /mnt/windows   fuseblk.ntfs-3g   rw,...
  user@server:/   /mnt/server    fuse.sshfs        rw,nosuid,nodev,...

This patch adds the necessary code to the kernel so that this can be
correctly displayed in /proc/mounts.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I have never seen a use of SLAB_DEBUG_INITIAL.  It is only supported by
SLAB.

I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again?  The callback is
performed before each freeing of an object.

I would think that it is much easier to check the object state manually
before the free.  That also places the check near the code object
manipulation of the object.

Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on.  If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code.  But there is no such code
in the kernel.  I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e.  add debug code before kfree).

There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches.  Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.

This is the last slab flag that SLUB did not support.  Remove the check for
unimplemented flags from SLUB.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If rootmode isn't valid, we hit the BUG() in fuse_init_inode.  Now
EINVAL is returned.
Signed-off-by: NTimo Savola <tsavola@movial.fi>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".

Compile tested with gcc & sparse.
Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert all calls to invalidate_inode_pages() into open-coded calls to
invalidate_mapping_pages().

Leave the invalidate_inode_pages() wrapper in place for now, marked as
deprecated.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Randy Dunlap wote:
> Should FUSE depend on BLOCK?  Without that and with BLOCK=n, I get:
>
> inode.c:(.text+0x3acc5): undefined reference to `sb_set_blocksize'
> inode.c:(.text+0x3a393): undefined reference to `get_sb_bdev'
> fs/built-in.o:(.data+0xd718): undefined reference to `kill_block_super

Most fuse filesystems work fine without block device support, so I
think a better solution is to disable the 'fuseblk' filesystem type if
BLOCK=n.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a DESTROY operation for block device based filesystems.  With the help of
this operation, such a filesystem can flush dirty data to the device
synchronously before the umount returns.

This is needed in situations where the filesystem is assumed to be clean
immediately after unmount (e.g.  ejecting removable media).
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add 'blksize' option for block device based filesystems.  During
initialization this is used to set the block size on the device and the super
block.  The default block size is 512bytes.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I never intended this, but people started using fuse to implement block device
based "real" filesystems (ntfs-3g, zfs).

The following four patches add better support for these kinds of filesystems.
Unlike "normal" fuse filesystems, using this feature should require superuser
privileges (enforced by the fusermount utility).

Thanks to Szabolcs Szakacsits for the input and testing.

This patch adds a 'fuseblk' filesystem type, which is only different from the
'fuse' filesystem type in how the 'dev_name' mount argument is interpreted.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse considered it an error (EIO) if lookup returned a directory inode, to
which a dentry already refered.  This is because directory aliases are not
allowed.

But in a network filesystem this could happen legitimately, if a directory is
moved on a remote client.  This patch attempts to relax the restriction by
trying to first evict the offending alias from the cache.  If this fails, it
still returns an error (EBUSY).

A rarer situation is if an mkdir races with an indenpendent lookup, which
finds the newly created directory already moved.  In this situation the mkdir
should return success, but that would be incorrect, since the dentry cannot be
instantiated, so return EBUSY.

Previously checking for a directory alias and instantiation of the dentry
weren't done atomically in lookup/mkdir, hence two such calls racing with each
other could create aliased directories.  To prevent this introduce a new
per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations
with a directory inode.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a spurious BUG in an unlikely race, where at least three parallel lookups
return the same inode, but with different file type.  This has not yet been
observed in real life.

Allowing unlimited retries could delay fuse_iget() indefinitely, but this is
really for the broken userspace filesystem to worry about.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An inode could be returned by independent parallel lookups, in this case an
update of the lookup counter could be lost resulting in a memory leak in
userspace.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fuse didn't always call i_size_write() with i_mutex held which caused rare
hangs on SMP/32bit.  This bug has been present since fuse-2.2, well before
being merged into mainline.

The simplest solution is to protect i_size_write() with the per-connection
spinlock.  Using i_mutex for this purpose would require some restructuring of
the code and I'm not even sure it's always safe to acquire i_mutex in all
places i_size needs to be set.

Since most of vmtruncate is already duplicated for other reasons, duplicate
the remaining part as well, making all i_size_write() calls internal to fuse.

Using i_size_write() was unnecessary in fuse_init_inode(), since this function
is only called on a newly created locked inode.

Reported by a few people over the years, but special thanks to Dana Henriksen
who was persistent enough in helping me debug it.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some filesystems may want to report different values depending on the path
within the filesystem, i.e.  one mount is actually several filesystems.  This
can be the case for a network filesystem exported by an unprivileged server
(e.g.  sshfs).

This is now possible, thanks to David Howells "VFS: Permit filesystem to
perform statfs with a known root dentry" patch.

This change is backward compatible, so no need to change interface version.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is entirely possible (though rare) that jiffies half-wraps around, while a
dentry/inode remains in the cache.  This could mean that the dentry/inode is
not invalidated for another half wraparound-time.

To get around this problem, use 64-bit jiffies.  The only problem with this is
that dentry->d_time is 32 bits on 32-bit archs.  So use d_fsdata as the high
32 bits.  This is an ugly hack, but far simpler, than having to allocate
private data just for this purpose.

Since 64-bit jiffies can be assumed never to wrap around, simple comparison
can be used, and a zero time value can represent "invalid".
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

VFS uses current->files pointer as lock owner ID, and it wouldn't be
prudent to expose this value to userspace.  So scramble it with XTEA using
a per connection random key, known only to the kernel.  Only one direction
needs to be implemented, since the ID is never sent in the reverse
direction.

The XTEA algorithm is implemented inline since it's simple enough to do so,
and this adds less complexity than if the crypto API were used.

Thanks to Jesper Juhl for the idea.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add synchronous request interruption.  This is needed for file locking
operations which have to be interruptible.  However filesystem may implement
interruptibility of other operations (e.g.  like NFS 'intr' mount option).
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds POSIX file locking support to the fuse interface.

This implementation doesn't keep any locking state in kernel.  Unlocking on
close() is handled by the FLUSH message, which now contains the lock owner id.

Mandatory locking is not supported.  The filesystem may enfoce mandatory
locking in userspace if needed.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>