- 29 7月, 2006 7 次提交
-
-
由 Andi Kleen 提交于
When int 0x80 is called from long mode r8-r11 would leak out of the kernel (or rather they would be filled with some values from the kernel stack). I don't think it's a security issue because the values come from the fixed stack frame which should be near always user registers from a previous interrupt. Still better fix it. Longer term the register save macros need to be cleaned up to avoid such mistakes in the future. Original analysis from Richard Brunner, fix by me. Cc: Richard.Brunner@amd.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Fixes a obscure user space triggerable crash during oprofiling. Oprofile calls profile_pc from NMIs even when user_mode(regs) is not true and the program counter is inside the kernel lock section. This opens a race - when a user program jumps to a kernel lock address and a NMI happens before the illegal page fault exception is raised and the program has a unmapped esp or ebp then the kernel could oops. NMIs have a higher priority than exceptions so that could happen. Add user_mode checks to i386/x86-64 profile_pc to prevent that. Cc: John Levon <levon@movementarian.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] update default configuration [S390] duplicate ccw devices in ccwgroup. [S390] permanent subchannel busy conditions may cause I/O stall
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SUNLANCE]: fix compilation on sparc-UP [SPARC]: Defer clock_probe to fs_initcall() [SPARC64]: Fix typo in pgprot_noncached(). [SPARC64]: Fix quad-float multiply emulation.
-
git://oss.sgi.com:8090/nathans/xfs-rc-2.6由 Linus Torvalds 提交于
* git://oss.sgi.com:8090/nathans/xfs-rc-2.6: [XFS] Ensure bulkstat from an invalid inode number gets caught always with [XFS] Fix a barrier related forced shutdown on mounts with quota enabled. [XFS] Fix remount vs no/barrier options by ensuring we clear unwanted [XFS] All xfs_disk_dquot_t values are (as the name says) disk endian.
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] scsi: kill overeager "not-ready" messages [PATCH] it821x: fix ide dma setup bug [PATCH] ide: if the id fields looks screwy, disable DMA [PATCH] ide: option to disable cache flushes for buggy drives
-
由 Chuck Ebbert 提交于
Recent changes in i386 __switch_to() have a misplaced closing parenthesis causing an unlikely() to terminate early. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 7月, 2006 12 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nathan Scott 提交于
EINVAL. SGI-PV: 953819 SGI-Modid: xfs-linux-melb:xfs-kern:26629a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 912426 SGI-Modid: xfs-linux-melb:xfs-kern:26622a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
flags from iclog buffers before submitting them for writing. SGI-PV: 954772 SGI-Modid: xfs-linux-melb:xfs-kern:26605a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Christoph Hellwig 提交于
Before putting them into struct statfs they should be endian-swapped. SGI-PV: 954580 SGI-Modid: xfs-linux-melb:xfs-kern:26550a Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Jens Axboe 提交于
HAL and friends have a tendency to trigger this one all the time. It's not really interesting, so kill it. The vendor kernels all do anyways. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Only enable dma for a valid speed setting. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
It's the safer choice. Originally due to a bug in itx821x, but a generally sound thing to do. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Some drives claim they support cache flushing, but get seriously confused if you try. Add this option to be able to boot with barriers enabled by default. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Bob Breuer 提交于
From: Bob Breuer <breuerr@mc.net> That way all the of_driver bits will be ready. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The sun4v code sequence was or'ing in the sun4u pte bits by mistake. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Something is wrong with the 3-multiply (vs. 4-multiply) optimized version of _FP_MUL_MEAT_2_*(), so just use the slower version which actually computes correct values. Noticed by Rene Rebe Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2006 3 次提交
-
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Fail to create a ccwgroup device if a ccw device is passed in twice. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
In special conditions where a subchannel rejects the HALT I/O- instruction with a busy indication (cc 2), I/O may stall. I/O request termination logic retries HALT I/O indefinitely because it expects HALT I/O to alter the subchannel status which is not true when cc 2 is returned. In case of a busy indication, try CLEAR I/O instruction immediately. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 7月, 2006 9 次提交
-
-
由 Christoph Hellwig 提交于
This fixes three drivers to compile again after my patch that removes the data_cmnd member from struct scsi_cmnd. The fas216 change is trivial, it should have been using ->cmnd all the time. NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing something odd, it should only have looked at ->cmnd before not the saved copy that is kept for the error handlers sake. Note that it really should deal with the sync setting themselves but use the generic domain validation code that get this right - but that's for later let's push this simple compile fix for now. And sorry for the late fix for this, I have been busy with OLS and associated activities last week. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SCSI] esp: Fix build. [SPARC]: Fix SA_STATIC_ALLOC value. [SPARC64]: Explicitly print return PC when the kernel fault PC is bogus.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4/IPV6]: Setting 0 for unused port field in RAW IP recvmsg(). [IPV4] ipmr: ip multicast route bug fix. [TG3]: Update version and reldate [TG3]: Handle tg3_init_rings() failures [TG3]: Add tg3_restart_hw() [IPV4]: Clear the whole IPCB, this clears also IPCB(skb)->flags. [IPV6]: Clean skb cb on IPv6 input. [NETFILTER]: Demote xt_sctp to EXPERIMENTAL [NETFILTER]: bridge netfilter: add deferred output hooks to feature-removal-schedule [NETFILTER]: xt_pkttype: fix mismatches on locally generated packets [NETFILTER]: SNMP NAT: fix byteorder confusion [NETFILTER]: conntrack: fix SYSCTL=n compile [NETFILTER]: nf_queue: handle NF_STOP and unknown verdicts in nf_reinject [NETFILTER]: H.323 helper: fix possible NULL-ptr dereference
-
由 Arjan van de Ven 提交于
The patch below moves the cpu hotplugging higher up in the cpufreq layering; this is needed to avoid recursive taking of the cpu hotplug lock and to otherwise detangle the mess. The new rules are: 1. you must do lock_cpu_hotplug() around the following functions: __cpufreq_driver_target __cpufreq_governor (for CPUFREQ_GOV_LIMITS operation only) __cpufreq_set_policy 2. governer methods (.governer) must NOT take the lock_cpu_hotplug() lock in any way; they are called with the lock taken already 3. if your governer spawns a thread that does things, like calling __cpufreq_driver_target, your thread must honor rule #1. 4. the policy lock and other cpufreq internal locks nest within the lock_cpu_hotplug() lock. I'm not entirely happy about how the __cpufreq_governor rule ended up (conditional locking rule depending on the argument) but basically all callers pass this as a constant so it's not too horrible. The patch also removes the cpufreq_governor() function since during the locking audit it turned out to be entirely unused (so no need to fix it) The patch works on my testbox, but it could use more testing (otoh... it can't be much worse than the current code) Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tetsuo Handa 提交于
From: Tetsuo Handa from-linux-kernel@i-love.sakura.ne.jp The recvmsg() for raw socket seems to return random u16 value from the kernel stack memory since port field is not initialized. But I'm not sure this patch is correct. Does raw socket return any information stored in port field? [ BSD defines RAW IP recvmsg to return a sin_port value of zero. This is described in Steven's TCP/IP Illustrated Volume 2 on page 1055, which is discussing the BSD rip_input() implementation. ] Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
IP multicast route code was reusing an skb which causes use after free and double free. From: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Note, it is real skb_clone(), not alloc_skb(). Equeued skb contains the whole half-prepared netlink message plus room for the rest. It could be also skb_copy(), if we want to be puristic about mangling cloned data, but original copy is really not going to be used. Acked-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.63. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Handle dev_alloc_skb() failures when initializing the RX rings. Without proper handling, the driver will crash when using a partial ring. Thanks to Stephane Doyon <sdoyon@max-t.com> for reporting the bug and providing the initial patch. Howie Xu <howie@vmware.com> also reported the same issue. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add tg3_restart_hw() to handle failures when re-initializing the device. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2006 9 次提交
-
-
由 Jens Axboe 提交于
The CIC_SEEKY() test really wants to use the minimum of either: - 2 msecs (not jiffies) - or, the pending slice time So code it like that. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Milton Miller 提交于
It should be toggling the same bit on and off, fix it up. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
We need to postpone the queue startup until after the softirq handler has actually finished some requests, otherwise we could be racing with cciss_softirq_done() and not actually restart the queue handling. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Guillaume Chazarain 提交于
Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Chazarain 提交于
Clear the accumulated junk in IP6CB when starting to handle an IPV6 packet. Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
After the recent problems with all the SCTP stuff it seems reasonable to mark this as experimental. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add bridge netfilter deferred output hooks to feature-removal-schedule and disable them by default. Until their removal they will be activated by the physdev match when needed. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Oester 提交于
Locally generated broadcast and multicast packets have pkttype set to PACKET_LOOPBACK instead of PACKET_BROADCAST or PACKET_MULTICAST. This causes the pkttype match to fail to match packets of either type. The below patch remedies this by using the daddr as a hint as to broadcast|multicast. While not pretty, this seems like the only way to solve the problem short of just noting this as a limitation of the match. This resolves netfilter bugzilla #484 Signed-off-by: NPhil Oester <kernel@linuxace.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-