In the next patch, I want to conditionally compile i915_gpu_error.c and
that requires moving the functions used by debug out of
i915_gpu_error.c!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161012090522.367-1-chris@chris-wilson.co.uk

Remove never used BSM{,_MASK}. BSM_MASK #define also causes a warning.

include/drm/i915_drm.h:96:34: warning: result of ‘65535 << 20’
requires 37 bits to represent, but ‘int’ only has 32 bits
[-Wshiftoverflow=]
   #define   INTEL_BSM_MASK (0xFFFF << 20)
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476256734-6457-1-git-send-email-joonas.lahtinen@linux.intel.com

With the previous code we were only recomputing the DDB partitioning
for the CRTCs included in the atomic commit, so any other active CRTCs
would end up having their DDB registers zeroed. In this patch we make
sure that the computed state starts as a copy of the current
partitioning, and then we only zero the DDBs that we're actually
going to recompute.

How to reproduce the bug:
  1 - Enable the primary plane on pipe A
  2 - Enable the primary plane on pipe B
  3 - Enable the cursor or sprite plane on pipe A

Step 3 will zero the DDB partitioning for pipe B since it's not
included in the commit that enabled the cursor or sprite for pipe A.

I expect this to fix many FIFO underrun problems on gen9+.

v2:
  - Mention the cursor on the steps to reproduce the problem (Paulo).
  - Add Testcase tag provided by Maarten (Maarten).

Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596
Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes
Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com

We'll be getting a function and a table for dp parameters soon enough,
so rename the function and table for hdmi. No functional changes.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3d1c61cab70b6a2966db9b6115b76edbd747a835.1476111629.git.jani.nikula@intel.com

Have generic macros in line with the rest of the register bit definition
macros instead of a dedicated function in intel_audio.c, and use them.
No functional changes.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c8709b065ba5cb91b85c54f4e099219e4e68b192.1476111629.git.jani.nikula@intel.com

HDMI audio should use crtc_clock to get the TMDS clock.

This patch renames mode to adjusted_mode to unify the name.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8945ac6bdae9c63a563bdd60b44dd316254e4752.1476111629.git.jani.nikula@intel.com

This patch applies setting proper N/M, N/CTS on more platforms.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/073f8aaf302df1b638dd33b0ddf46930bcdfea99.1476111629.git.jani.nikula@intel.com

The code for dp and hdmi are already different, and they're about to
diverge even more. Split them for clarity in future work. No functional
changes.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/41b8e24fed92effafaef69675ddabfa2008b4d31.1476111629.git.jani.nikula@intel.com

It gets fragile to duplicate the code for updating HSW_AUD_CFG. The only
change should be that the hdmi pixel clock is also updated in
i915_audio_component_sync_audio_rate(), but it should not be any
different.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/e0e88ec00c0ed1734083153b55283efd3116be5c.1476111629.git.jani.nikula@intel.com

If it was wrong, we'd be screwed already.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8cf454ccefc05b234aa81c45a4ce9018e7c9324f.1476111629.git.jani.nikula@intel.com

Prepare for using the same code for updating HSW_AUD_CFG register. No
functional changes.

Cc: Libin Yang <libin.yang@linux.intel.com>
Reviewed-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56fe0662990289c647f998c11089133ca92ebb68.1476111629.git.jani.nikula@intel.com

If we want to know how many pages a VMA spans, we can use vma_pages() to
find out. We have one such invocation inside our faulthandler, so
convert it. (We have two other that want the size in bytes rather than
pages, food for future thought.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011090656.29554-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

commit 1625e7e5 ("drm/i915: make compact dma scatter lists creation
work with SWIOTLB backend") took a heavy handed approach to undo the
scatterlist compaction in the face of SWIOTLB. (The compaction hit a bug
whereby we tried to pass a segment larger than SWIOTLB could handle.) We
can be a little more intelligent and try compacting the scatterlist up
to the maximum SWIOTLB segment size (when using SWIOTLB).

v2: Tidy sg_mark_end() and cpp
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
CC: Imre Deak <imre.deak@intel.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011082021.14606-2-chris@chris-wilson.co.uk

When we notice the system under memory pressure, we try to evict some
driver pages before asking the VM to shrink all caches. As a final step
in that process, we tried to evict everything, including active buffers.
This is harming ourselves, and we can mix shrinking all caches as well
as our residual buffers (after the first pass of trying to shrink just
our own buffers).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011082021.14606-1-chris@chris-wilson.co.uk

The conflict resolution of v4.8-rc8 backmerge to drm-next pulled back in
a few lines of dead code due to the code movement around
i915_gem_reset(), fix that up.

Fixes: ca09fb9f ("Merge tag 'v4.8-rc8' into drm-next")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161010125017.23911-1-chris@chris-wilson.co.uk

We reserve space in the GuC workqueue for submitting the request in the
future. However, if we fail to construct the request, we need to give
that reserved space back to the system.

Fixes: dadd481b ("drm/i915/guc: Prepare for nonblocking execbuf submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97978Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-4-chris@chris-wilson.co.uk
(cherry picked from commit 5ba89908)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.

v2: Cancel both timers as well, sanitize the IMR.

Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-3-chris@chris-wilson.co.uk
(cherry picked from commit ad07dfcd)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If we run out of enough aperture space to fit the entire object, we
fallback to trying to insert a single page. However, if that also fails,
we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means
to userspace that their batch could not be fitted within the GTT.) Prior
to commit e8cb909a ("drm/i915: Fallback to single page GTT
mmappings for relocations") the approach is to fallback to using the
slow CPU relocation path in case of iomapping failure, and that is the
behaviour we need to restore.

Fixes: e8cb909a ("drm/i915: Fallback to single page GTT mmappings...")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98101Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-2-chris@chris-wilson.co.uk
(cherry picked from commit d7f76335)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

In order not to trigger hangcheck on a idle-but-waiting engine, we need
to distinguish between the pending request queue and the actual
execution queue. This is done later in "drm/i915: Enable multiple
timelines" but for now we need a temporary fix to prevent blaming the
wrong engine for a GPU hang.

(Note that this causes a temporary subtle change in how we decide when
to allow a waitboost to be re-awarded back to the waiter, the temporary
effect is that if the wait is upon the most current execution the wait
is given for free, instead of checking to see if the client stalled
itself. This will be repaired in "drm/i915: Enable multiple timelines".)

Fixes: 0a046a0e ("drm/i915: Nonblocking request submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98104Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-1-chris@chris-wilson.co.uk
(cherry picked from commit 8687b3ec)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Allow returning "connected" or "unknown" connector status for DP branch
devices that don't have an EDID. Currently we'd claim the thing as
"disconnected" if there is no EDID.

This stuff used to broken already, I think, but it got more broken by
commit f21a2198 ("drm/i915: Splitting intel_dp_detect")

Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: NArno <blouin.arno@gmail.com>
Fixes: f21a2198 ("drm/i915: Splitting intel_dp_detect")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 5cb651a7)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We can't rely on connector->status in the detect() hook if the long hpd
was already handled by the dig_port_work as that won't update
connector->status. Thus we have to defer the long hpd handling entirely
until the hotplug work runs to avoid the double long hpd handling
the "detect_done" flag is trying to prevent.

We'll start to depend on connector->status being up to date in a
following patch.

Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: NArno <blouin.arno@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 27d4efc5)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.

Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-2-chris@chris-wilson.co.uk
(cherry picked from commit a3aabe86)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When decoding the semaphores inside hangcheck, we need to use the hw-id
and not the local array index.

Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI ...")
Testcase: igt/gem_exec_whisper/hang # gen6-7
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-3-chris@chris-wilson.co.uk
(cherry picked from commit 348b9b11)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We use obj->phys_handle to choose the pread/pwrite path, but as
obj->phys_handle is a union with obj->userptr, we then mistakenly use
the phys_handle path for userptr objects within pread/pwrite.

Testcase: igt/gem_userptr_blits/forbidden-operations
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97519Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-2-chris@chris-wilson.co.uk
(cherry picked from commit 5f12b80a)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When we enable the per-register access mmiodebug, it is to detect which
access is illegal. Reporting on earlier untraced access outside of the
mmiodebug does not help debugging (as the suspicion is immediately put
upon the current register which is not at fault)!

References: https://bugs.freedesktop.org/show_bug.cgi?id=97985Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161003124516.12388-1-chris@chris-wilson.co.uk
(cherry picked from commit dda96033)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We were previously adding all the planes owned by the CRTC even when
the ddb partitioning didn't change for them. As a consequence, a lot
of functions were being called when we were just moving the cursor
around the screen, such as skylake_update_primary_plane().

This was causing flickering on the primary plane when moving the
cursor. I'm not 100% sure which operation caused the flickering, but
we were writing to a lot of registers, so it could be any of these
writes. With this patch, just moving the mouse won't add the primary
plane to the commit since it won't trigger a change in DDB
partitioning.

v2: Use skl_ddb_entry_equal() (Lyude).
v3: Change Reported-and-bisected-by: to Reported-by: for checkpatch

Fixes: 05a76d3d ("drm/i915/skl: Ensure pipes with changed wms get added to the state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97888
Cc: Mike Lothian <mike@fireburn.co.uk>
Cc: stable@vger.kernel.org
Reported-by: NMike Lothian <mike@fireburn.co.uk>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NLyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475177808-29955-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7f60e200)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
forbidden to set it for LVDS/CRT as well. So let's also set it on
CRT to make it possible to share the DPLL between HDMI and CRT.

What that bit apparently does is enable the x5 clock to the port,
which then pumps out the bits on both edges of the clock. The DAC
doesn't need that clock since it's not pumping out bits, but I don't
think it hurts to have the DPLL output that clock anyway.

This is fairly important on IVB since it has only two DPLLs with three
pipes. So trying to drive three or more PCH ports with three pipes
is only possible when at least one of the DPLLs gets shared between
two of the pipes.

SNB doesn't really need to do this since it has only two pipes. It could
be done to avoid enabling the second DPLL at all in certain cases, but
I'm not sure that's such a huge win. So let's not do it for SNB, at
least for now. On ILK it never makes sense as the DPLLs can't be shared.

v2: Just always enable the high speed clock to keep things simple (Daniel)
    Beef up the commit message a bit (Daniel)

Cc: Nick Yamane <nick.diego@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: NNick Yamane <nick.diego@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97204Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474878646-17711-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
(cherry picked from commit 7d7f8633)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

a277ca7d should've been a no-functional-change commit, but it
removed the initialization of the dpll_hw_state for HDMI outputs,
resulting in state mismatches and a failed modeset with blank
screen. Fix this by reinstating the dpll_hw_state initialization.

v2:
- Make bxt_ddi_hdmi_set_dpll_hw_state() static.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()")
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474901671-22719-1-git-send-email-imre.deak@intel.com
(cherry picked from commit a04139c4)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We forgot the "res_blocks += y_tile_minimum" that's described on step
V of our documentation.

Again, this should only affect the Y tiling cases.

It looks like the relevant code was introduced in 0fda6568, but
there's always the possibility that it matched our specification when
it was introduced, and then the specification changed while the code
stayed the same. So we can't really say this was a regression, but
let's try to add a "Fixes" tag anyway to help backporting.

v2: Try to add a "Fixes" tag (Maarten).

Fixes: 0fda6568 ("drm/i915/skl: Update watermarks for Y tiling")
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-8-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 75676ed4)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The confusing thing is that plane_blocks_per_line is listed as part of
the method 2 calculation but is also used for other things. We
calculated it in two different places and different ways: one inside
skl_wm_method2() and the other inside skl_compute_plane_wm(). The
skl_wm_method2() implementation is the one that matches the
specification.

With this patch we fix the skl_compute_plane_wm() calculation and just
pass it as a parameter to skl_wm_method2(). We also take care to not
modify the value of plane_bytes_per_line since we're going to rely on
it having a correct value in later patches.

This should affect the watermarks for Linear and Y-tiled.

From my analysis, it looks like the two plane_blocks_per_line
variables got out of sync on 0fda6568, but we can't really say
that commit was a regression, it looks like just an incomplete fix.
There's always the possibility that 0fda6568 matched our
specification at that time, and then later the specification changed.

v2: Try to add a "Fixes" tag (Maarten).

Fixes: 0fda6568 ("drm/i915/skl: Update watermarks for Y tiling")
Cc: stable@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-7-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 7a1a8aed)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.

This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.

Cc: stable@vger.kernel.org
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-6-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 1186fa85)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Bspec says:
  "The mailbox response data may not account for memory read latency.
   If the mailbox response data for level 0 is 0us, add 2 microseconds
   to the result for each valid level."

This means we should only do the +2 in case wm[0] == 0, not always.

So split the sanitizing implementation from the WA implementation and
fix the WA implementation.

v2: Add Fixes tag (Maarten).

Fixes: 367294be ("drm/i915/gen9: Add 2us read latency to WM level")
Cc: stable@vger.kernel.org
Cc: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-5-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 0727e40a)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

According to BSpec, it's the "core CPUs" that need the code, which
means SKL and KBL, but not BXT.

I don't have a KBL to test this patch on it.

v2: Only SKL should have I915_SAGV_NOT_CONTROLLED.

Cc: stable@vger.kernel.org
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-4-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 6e3100ec)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

And use it to move knowledge about the SAGV-supporting platforms from
the callers to the SAGV code.

We'll add more platforms to intel_has_sagv(), so IMHO it makes more
sense to move all this to a single function instead of patching all
the callers every time we add SAGV support to a new platform.

v2: Move I915_SAGV_NOT_CONTROLLED to the new function (Lyude).

Cc: stable@vger.kernel.org
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-3-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 56feca91)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The plan is to introduce intel_has_sagv() and then use it to discover
which platforms actually support it.

I thought about keeping the functions with their current skl names,
but found two problems: (i) skl_has_sagv() would become a very
confusing name, and (ii) intel_atomic_commit_tail() doesn't seem to be
calling any functions whose name start with a platform name, so the
"intel_" naming scheme seems make more sense than the "firstplatorm_"
naming scheme here.

Cc: stable@vger.kernel.org
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474578035-424-2-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 16dcdc4e)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We never remembered to set it (so it was zero), but this was not a
problem in the past due to the way handled the hardware registers.
Unfortunately we changed how we set the hardware and forgot to set
intel_crtc->dspaddr_offset.

This started to reflect on a few kms_frontbuffer_tracking subtests
that relied on page flips with CRTCs that don't point to the x:0,y:0
coordinates of the frontbuffer. After the page flip the CRTC was
showing the x:0,y:0 coordinate of the frontbuffer instead of
x:500,y:500. This problem is present even if we don't enable FBC or
PSR.

While trying to bisect it I realized that the first bad commit
actually just gives me a black screen for the mentioned tests instead
of showing the wrong x:0,y:0 offsets. A few commits later the black
screen problem goes away and we get to the point where the code is
today, but I'll consider the black screen as the first bad commit
since it's the point where the IGT subtests start to fail.

Fixes: 6687c906 ("drm/i915: Rewrite fb rotation GTT handling")
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-pgflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-primscrn-shrfb-evflip-blt
Testcase: kms_frontbuffer_tracking/fbc-1p-shrfb-fliptrack
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471644203-23463-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 4c0b8a8b)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

At the point of creating the hibernation image, the runtime power manage
core is disabled - and using the rpm functions triggers a warn.
i915_gem_shrink_all() tries to unbind objects, which requires device
access and so tries to how an rpm reference triggering a warning:

[   44.235420] ------------[ cut here ]------------
[   44.235424] WARNING: CPU: 2 PID: 2199 at drivers/gpu/drm/i915/intel_runtime_pm.c:2688 intel_runtime_pm_get_if_in_use+0xe6/0xf0
[   44.235426] WARN_ON_ONCE(ret < 0)
[   44.235445] Modules linked in: ctr ccm arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cmac cfg80211 btusb rfcomm bnep btrtl btbcm btintel bluetooth dcdbas x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic aesni_intel snd_hda_codec_hdmi aes_x86_64 lrw gf128mul snd_hda_intel glue_helper ablk_helper cryptd snd_hda_codec hid_multitouch joydev snd_hda_core binfmt_misc i2c_hid serio_raw snd_pcm acpi_pad snd_timer snd i2c_designware_platform 8250_dw nls_iso8859_1 i2c_designware_core lpc_ich mfd_core soundcore usbhid hid psmouse ahci libahci
[   44.235447] CPU: 2 PID: 2199 Comm: kworker/u8:8 Not tainted 4.8.0-rc5+ #130
[   44.235447] Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A07 11/11/2015
[   44.235450] Workqueue: events_unbound async_run_entry_fn
[   44.235453]  0000000000000000 ffff8801b2f7fb98 ffffffff81306c2f ffff8801b2f7fbe8
[   44.235454]  0000000000000000 ffff8801b2f7fbd8 ffffffff81056c01 00000a801f50ecc0
[   44.235456]  ffff88020ce50000 ffff88020ce59b60 ffffffff81a60b5c ffffffff81414840
[   44.235456] Call Trace:
[   44.235459]  [<ffffffff81306c2f>] dump_stack+0x4d/0x6e
[   44.235461]  [<ffffffff81056c01>] __warn+0xd1/0xf0
[   44.235464]  [<ffffffff81414840>] ? i915_pm_suspend_late+0x30/0x30
[   44.235465]  [<ffffffff81056c6f>] warn_slowpath_fmt+0x4f/0x60
[   44.235468]  [<ffffffff814e73ce>] ? pm_runtime_get_if_in_use+0x6e/0xa0
[   44.235469]  [<ffffffff81433526>] intel_runtime_pm_get_if_in_use+0xe6/0xf0
[   44.235471]  [<ffffffff81458a26>] i915_gem_shrink+0x306/0x360
[   44.235473]  [<ffffffff81343fd4>] ? pci_platform_power_transition+0x24/0x90
[   44.235475]  [<ffffffff81414840>] ? i915_pm_suspend_late+0x30/0x30
[   44.235476]  [<ffffffff81458dfb>] i915_gem_shrink_all+0x1b/0x30
[   44.235478]  [<ffffffff814560b3>] i915_gem_freeze_late+0x33/0x90
[   44.235479]  [<ffffffff81414877>] i915_pm_freeze_late+0x37/0x40
[   44.235481]  [<ffffffff814e9b8e>] dpm_run_callback+0x4e/0x130
[   44.235483]  [<ffffffff814ea5db>] __device_suspend_late+0xdb/0x1f0
[   44.235484]  [<ffffffff814ea70f>] async_suspend_late+0x1f/0xa0
[   44.235486]  [<ffffffff81077557>] async_run_entry_fn+0x37/0x150
[   44.235488]  [<ffffffff8106f518>] process_one_work+0x148/0x3f0
[   44.235490]  [<ffffffff8106f8eb>] worker_thread+0x12b/0x490
[   44.235491]  [<ffffffff8106f7c0>] ? process_one_work+0x3f0/0x3f0
[   44.235492]  [<ffffffff81074d09>] kthread+0xc9/0xe0
[   44.235495]  [<ffffffff816e257f>] ret_from_fork+0x1f/0x40
[   44.235496]  [<ffffffff81074c40>] ? kthread_park+0x60/0x60
[   44.235497] ---[ end trace e438706b97c7f132 ]---

Alternatively, to actually shrink everything we have to do so slightly
earlier in the hibernation process.

To keep lockdep silent, we need to take struct_mutex for the shrinker
even though we know that we are the only user during the freeze.

Fixes: 7aab2d53 ("drm/i915: Shrink objects prior to hibernation")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-2-chris@chris-wilson.co.uk
(cherry picked from commit 6a800eab)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Following commit 821ed7df ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97824
Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-1-chris@chris-wilson.co.uk
(cherry picked from commit f2a91d1a)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Reapply the PPS register unlock workaround after GPU reset on platforms
where the reset clobbers the display HW state. This at least gets rid of
the related WARN during LVDS encoder enabling on PNV.

Fixes: ed6143b8 ("drm/i915/lvds: Restore initial HW state during encoder enabling")
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473847453-4771-1-git-send-email-imre.deak@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 51f59205)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Backlight enable is supposed to do a full setup of the backlight. We
were missing the PWM alternate increment bit in the south chicken
registers on lpt+ pch. This potentially caused a PWM frequency change
when the chicken register value was lost e.g. on suspend.

v2 by Jani, rebase on the patch caching alt increment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97486
References: https://bugs.freedesktop.org/show_bug.cgi?id=67454
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Wei Shun Chen <wei.shun.chang@intel.com>
Cc: Gary C Wang <gary.c.wang@intel.com>
Cc: stable@vger.kernel.org # v4.4+ 16e1203d drm/i915/backlight: setup and cache...
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NShawn Lee <shawn.c.lee@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8265f5935bd31c039ddfc82819d26c2ca1ae9cba.1474281249.git.jani.nikula@intel.com
(cherry picked from commit e29aff05)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>