task #28327019

commit 36b238d5717279163859fb6ba0f4360abcafab83 upstream

When switching tasks running on a CPU, the psi state of a cgroup
containing both of these tasks does not change. Right now, we don't
exploit that, and can perform many unnecessary state changes in nested
hierarchies, especially when most activity comes from one leaf cgroup.

This patch implements an optimization where we only update cgroups
whose state actually changes during a task switch. These are all
cgroups that contain one task but not the other, up to the first
shared ancestor. When both tasks are in the same group, we don't need
to update anything at all.

We can identify the first shared ancestor by walking the groups of the
incoming task until we see TSK_ONCPU set on the local CPU; that's the
first group that also contains the outgoing task.

The new psi_task_switch() is similar to psi_task_change(). To allow
code reuse, move the task flag maintenance code into a new function
and the poll/avg worker wakeups into the shared psi_group_change().
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200316191333.115523-3-hannes@cmpxchg.orgSigned-off-by: Nzhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

task #28327019

commit b05e75d611380881e73edc58a20fd8c6bb71720b upstream

For simplicity, cpu pressure is defined as having more than one
runnable task on a given CPU. This works on the system-level, but it
has limitations in a cgrouped reality: When cpu.max is in use, it
doesn't capture the time in which a task is not executing on the CPU
due to throttling. Likewise, it doesn't capture the time in which a
competing cgroup is occupying the CPU - meaning it only reflects
cgroup-internal competitive pressure, not outside pressure.

Enable tracking of currently executing tasks, and then change the
definition of cpu pressure in a cgroup from

	NR_RUNNING > 1

to

	NR_RUNNING > ON_CPU

which will capture the effects of cpu.max as well as competition from
outside the cgroup.

After this patch, a cgroup running `stress -c 1` with a cpu.max
setting of 5000 10000 shows ~50% continuous CPU pressure.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200316191333.115523-2-hannes@cmpxchg.orgSigned-off-by: Nzhongjiang-ali <zhongjiang-ali@linux.alibaba.com>
Reviewed-by: NXunlei Pang <xlpang@linux.alibaba.com>

fix #28092200

commit cdd6ad3ac63d2fa320baefcf92a02a918375c30f upstream

There are cases where halt polling is unwanted. For example when running
KVM on an over committed LPAR we rather want to give back the CPU to
neighbour LPARs instead of polling. Let us provide a callback that
allows architectures to disable polling.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Nchenxiangzuo <cxz18821786681@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

to #28092200

commit d970a325561da5e611596cbb06475db3755ce823 upstream

Reported with "make W=1" due to -Wmissing-prototypes.
Reported-by: NQian Cai <cai@lca.pw>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nchenxiangzuo <cxz18821786681@linux.alibaba.com>
Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>

to #28170604

commit 9f5834c868e901b00f1bfe4d0052b5906b4a2b7f upstream

Commit bbbdeb4720a0 ("io_uring: dual license io_uring.h uapi header")
uses a nested SPDX-License-Identifier to dual license the header.

Since then, ./scripts/spdxcheck.py complains:

  include/uapi/linux/io_uring.h: 1:60 Missing parentheses: OR

Add parentheses to make spdxcheck.py happy.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit bbbdeb4720a0759ec90e3bcb20ad28d19e531346 upstream

This just syncs the header it with the liburing version, so there's no
confusion on the license of the header parts.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit 067524e914cb23e20d59480b318fe2625eaee7c8 upstream

We have IORING_OP_PROVIDE_BUFFERS, but the only way to remove buffers
is to trigger IO on them. The usual case of shrinking a buffer pool
would be to just not replenish the buffers when IO completes, and
instead just free it. But it may be nice to have a way to manually
remove a number of buffers from a given group, and
IORING_OP_REMOVE_BUFFERS provides that functionality.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit 0a384abfae66651b28e4bbe16883b1ff046ba3b3 upstream

This splits it into two parts, one that imports the message, and one
that imports the iovec. This allows a caller to only do the first part,
and import the iovec manually afterwards.

No functional changes in this patch.
Acked-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit bcda7baaa3f15c7a95db3c024bb046d6e298f76b upstream

If a server process has tons of pending socket connections, generally
it uses epoll to wait for activity. When the socket is ready for reading
(or writing), the task can select a buffer and issue a recv/send on the
given fd.

Now that we have fast (non-async thread) support, a task can have tons
of pending reads or writes pending. But that means they need buffers to
back that data, and if the number of connections is high enough, having
them preallocated for all possible connections is unfeasible.

With IORING_OP_PROVIDE_BUFFERS, an application can register buffers to
use for any request. The request then sets IOSQE_BUFFER_SELECT in the
sqe, and a given group ID in sqe->buf_group. When the fd becomes ready,
a free buffer from the specified group is selected. If none are
available, the request is terminated with -ENOBUFS. If successful, the
CQE on completion will contain the buffer ID chosen in the cqe->flags
member, encoded as:

	(buffer_id << IORING_CQE_BUFFER_SHIFT) | IORING_CQE_F_BUFFER;

Once a buffer has been consumed by a request, it is no longer available
and must be registered again with IORING_OP_PROVIDE_BUFFERS.

Requests need to support this feature. For now, IORING_OP_READ and
IORING_OP_RECV support it. This is checked on SQE submission, a CQE with
res == -EOPNOTSUPP will be posted if attempted on unsupported requests.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit ddf0322db79c5984dc1a1db890f946dd19b7d6d9 upstream

IORING_OP_PROVIDE_BUFFERS uses the buffer registration infrastructure to
support passing in an addr/len that is associated with a buffer ID and
buffer group ID. The group ID is used to index and lookup the buffers,
while the buffer ID can be used to notify the application which buffer
in the group was used. The addr passed in is the starting buffer address,
and length is each buffer length. A number of buffers to add with can be
specified, in which case addr is incremented by length for each addition,
and each buffer increments the buffer ID specified.

No validation is done of the buffer ID. If the application provides
buffers within the same group with identical buffer IDs, then it'll have
a hard time telling which buffer ID was used. The only restriction is
that the buffer ID can be a max of 16-bits in size, so USHRT_MAX is the
maximum ID that can be used.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

Notes: use VERIFY_WRITE for access_ok()
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit d7718a9d25a61442da8ee8aeeff6a0097f0ccfd6 upstream

Currently io_uring tries any request in a non-blocking manner, if it can,
and then retries from a worker thread if we get -EAGAIN. Now that we have
a new and fancy poll based retry backend, use that to retry requests if
the file supports it.

This means that, for example, an IORING_OP_RECVMSG on a socket no longer
requires an async thread to complete the IO. If we get -EAGAIN reading
from the socket in a non-blocking manner, we arm a poll handler for
notification on when the socket becomes readable. When it does, the
pending read is executed directly by the task again, through the io_uring
task work handlers. Not only is this faster and more efficient, it also
means we're not generating potentially tons of async threads that just
sit and block, waiting for the IO to complete.

The feature is marked with IORING_FEAT_FAST_POLL, meaning that async
pollable IO is fast, and that poll<link>other_op is fast as well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit 7d67af2c013402537385dae343a2d0f6a4cb3bfd upstream

Add support for splice(2).

- output file is specified as sqe->fd, so it's handled by generic code
- hash_reg_file handled by generic code as well
- len is 32bit, but should be fine
- the fd_in is registered file, when SPLICE_F_FD_IN_FIXED is set, which
is a splice flag (i.e. sqe->splice_flags).
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #28170604

commit 444ebb5768c5c43aadfc60111fecd6c4f946e77b upstream

Make do_splice(), so other kernel parts can reuse it
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 09952e3e7826119ddd4357c453d54bcc7ef25156 upstream.

Just like commit 4022e7af86be, this fixes the fact that
IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks
current->signal->rlim[] for limits.

Add an extra argument to __sys_accept4_file() that allows us to pass
in the proper nofile limit, and grab it at request prep time.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 4022e7af86be2dd62975dedb6b7ea551d108695e upstream.

Dmitry reports that a test case shows that io_uring isn't honoring a
modified rlimit nofile setting. get_unused_fd_flags() checks the task
signal->rlimi[] for the limits. As this isn't easily inheritable,
provide a __get_unused_fd_flags() that takes the value instead. Then we
can grab it when the request is prepared (from the original task), and
pass that in when we do the async part part of the open.
Reported-by: NDmitry Kadashev <dkadashev@gmail.com>
Tested-by: NDmitry Kadashev <dkadashev@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit b5e683d5cab8cd433b06ae178621f083cabd4f63 upstream.

eventfd use cases from aio and io_uring can deadlock due to circular
or resursive calling, when eventfd_signal() tries to grab the waitqueue
lock. On top of that, it's also possible to construct notification
chains that are deep enough that we could blow the stack.

Add a percpu counter that tracks the percpu recursion depth, warn if we
exceed it. The counter is also exposed so that users of eventfd_signal()
can do the right thing if it's non-zero in the context where it is
called.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 3e4827b05d2ac2d377ed136a52829ec46787bf4b upstream.

This adds IORING_OP_EPOLL_CTL, which can perform the same work as the
epoll_ctl(2) system call.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 39220e8d4a2aaab045ea03cc16d737e85d0817bf upstream.

Also make it available outside of epoll, along with the helper that
decides if we need to copy the passed in epoll_event.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 75c6a03904e0dd414a4d99a3072075cb5117e5bc upstream.

For personalities previously registered via IORING_REGISTER_PERSONALITY,
allow any command to select them. This is done through setting
sqe->personality to the id returned from registration, and then flagging
sqe->flags with IOSQE_PERSONALITY.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 071698e13ac6ba786dfa22349a7b62deb5a9464d upstream.

If an application wants to use a ring with different kinds of
credentials, it can register them upfront. We don't lookup credentials,
the credentials of the task calling IORING_REGISTER_PERSONALITY is used.

An 'id' is returned for the application to use in subsequent personality
support.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 24369c2e3bb06d8c4e71fd6ceaf4f8a01ae79b7c upstream.

If IORING_SETUP_ATTACH_WQ is set, it expects wq_fd in io_uring_params to
be a valid io_uring fd io-wq of which will be shared with the newly
created io_uring instance. If the flag is set but it can't share io-wq,
it fails.

This allows creation of "sibling" io_urings, where we prefer to keep the
SQ/CQ private, but want to share the async backend to minimize the amount
of overhead associated with having multiple rings that belong to the same
backend.
Reported-by: NJens Axboe <axboe@kernel.dk>
Reported-by: NDaurnimator <quae@daurnimator.com>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit cccf0ee834559ae0b327b40290e14f6a2a017177 upstream.

We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.

Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.

Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 6b47ee6ecab142f938a40bf3b297abac74218ee2 upstream.

For each IOSQE_* flag there is a corresponding REQ_F_* flag. And there
is a repetitive pattern of their translation:
e.g. if (sqe->flags & SQE_FLAG*) req->flags |= REQ_F_FLAG*

Use same numeric values/bits for them and copy instead of manual
handling.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 66f4af93da5761d2fa05c0dc673a47003cdb9cfe upstream.

The application currently has no way of knowing if a given opcode is
supported or not without having to try and issue one and see if we get
-EINVAL or not. And even this approach is fraught with peril, as maybe
we're getting -EINVAL due to some fields being missing, or maybe it's
just not that easy to issue that particular command without doing some
other leg work in terms of setup first.

This adds IORING_REGISTER_PROBE, which fills in a structure with info
on what it supported or not. This will work even with sparse opcode
fields, which may happen in the future or even today if someone
backports specific features to older kernels.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 354420f705ccd0aa2d41249f3bb55b4afbed1873 upstream.

For some test apps at least, user_data is just zeroes. So it's not a
good way to tell what the command actually is. Add the opcode to the
issue trace point.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit cebdb98617ae3e842c81c73758a185248b37cfd6 upstream.

Add support for the new openat2(2) system call. It's trivial to do, as
we can have openat(2) just be wrapped around it.
Suggested-by: NStefan Metzmacher <metze@samba.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit f2842ab5b72d7ee5f7f8385c2d4f32c133f5837b upstream.

If an application is using eventfd notifications with poll to know when
new SQEs can be issued, it's expecting the following read/writes to
complete inline. And with that, it knows that there are events available,
and don't want spurious wakeups on the eventfd for those requests.

This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like
IORING_REGISTER_EVENTFD, except it only triggers notifications for events
that happen from async completions (IRQ, or io-wq worker completions).
Any completions inline from the submission itself will not trigger
notifications.
Suggested-by: NMark Papadakis <markuspapadakis@icloud.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 18c9a6bbe0645a05172a900740b9d2d379d54320 upstream.

This function will be used in a later patch to switch the struct
request_queue q_usage_counter from killed back to live. In contrast
to percpu_ref_reinit(), this new function does not require that the
refcount is zero.
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit fddafacee287b3140212c92464077e971401f860 upstream.

This adds IORING_OP_SEND for send(2) support, and IORING_OP_RECV for
recv(2) support.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 8110c1a6212e430a84edd2b83fe9043def8b743e upstream.

Some applications like to start small in terms of ring size, and then
ramp up as needed. This is a bit tricky to do currently, since we don't
advertise the max ring size.

This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring
size exceed what we support, then clamp them at the max values instead
of returning -EINVAL. Since we return the chosen ring sizes after setup,
no further changes are needed on the application side. io_uring already
changes the ring sizes if the application doesn't ask for power-of-two
sizes, for example.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 4e5ef02317b12e2ed3d604281ffb6b75261f7612 upstream.

Add percpu_ref_tryget_many(), which works the same way as
percpu_ref_tryget(), but grabs specified number of refs.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NDennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit c1ca757bd6f4632c510714631ddcc2d13030fe1e upstream.

This adds support for doing madvise(2) through io_uring. We assume that
any operation can block, and hence punt everything async. This could be
improved, but hard to make bullet proof. The async punt ensures it's
safe.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit db08ca25253d56f1f76eb4b3fe32a7ac1fbab741 upstream.

This is in preparation for enabling this functionality through io_uring.
Add a helper that is just exporting what sys_madvise() does, and have the
system call use it.

No functional changes in this patch.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 4840e418c2fc533d55ff6caa5b9313eed1d26cfd upstream.

This adds support for doing fadvise through io_uring. We assume that
WILLNEED doesn't block, but that DONTNEED may block.
Reviewed-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit ba04291eb66ed895f194ae5abd3748d72bf8aaea upstream.

This behaves like preadv2/pwritev2 with offset == -1, it'll use (and
update) the current file position. This obviously comes with the caveat
that if the application has multiple read/writes in flight, then the
end result will not be as expected. This is similar to threads sharing
a file descriptor and doing IO using the current file position.

Since this feature isn't easily detectable by doing a read or write,
add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to
detect presence of this feature.
Reported-by: N李通洲 <carter.li@eoitek.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 3a6820f2bb8a079975109c25a5d1f29f46bce5d2 upstream.

For uses cases that don't already naturally have an iovec, it's easier
(or more convenient) to just use a buffer address + length. This is
particular true if the use case is from languages that want to create
a memory safe abstraction on top of io_uring, and where introducing
the need for the iovec may impose an ownership issue. For those cases,
they currently need an indirection buffer, which means allocating data
just for this purpose.

Add basic read/write that don't require the iovec.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit ce35a47a3a0208a77b4d31b7f2e8ed57d624093d upstream.

io_uring defaults to always doing inline submissions, if at all
possible. But for larger copies, even if the data is fully cached, that
can take a long time. Add an IOSQE_ASYNC flag that the application can
set on the SQE - if set, it'll ensure that we always go async for those
kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we
get the concurrency we desire for this case.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit eddc7ef52a6b37b7ba3d1c8a8fbb63d5d9914f8a upstream.

This provides support for async statx(2) through io_uring.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

We currently fully quiesce the ring before an unregister or update of
the fixed fileset. This is very expensive, and we can be a bit smarter
about this.

Add a percpu refcount for the file tables as a whole. Grab a percpu ref
when we use a registered file, and put it on completion. This is cheap
to do. Upon removal of a file from a set, switch the ref count to atomic
mode. When we hit zero ref on the completion side, then we know we can
drop the previously registered files. When the old files have been
dropped, switch the ref back to percpu mode for normal operation.

Since there's a period between doing the update and the kernel being
done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the
same action. The application knows the update has completed when it gets
the CQE for it. Between doing the update and receiving this completion,
the application must continue to use the unregistered fd if submitting
IO on this particular file.

This takes the runtime of test/file-register from liburing from 14s to
about 0.7s.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

to #26323588

commit 7d9ab9b6adffd9c474c1274acb5f6208f9a09cf3 upstream.

Release percpu memory after finishing the switch to the atomic mode
if only PERCPU_REF_ALLOW_REINIT isn't set.
Signed-off-by: NRoman Gushchin <guro@fb.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDennis Zhou <dennis@kernel.org>
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>