A thinko in code means we never trigger interrupt
mitigation. Fix this.
Reported-by: NJuan Quintela <quintela@redhat.com>
Reported-by: NUnai Uribarri <unai.uribarri@optenet.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

An error could cause vhost_net_set_backend to exit without unlocking
vq->mutex. Fix this.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

guest to remote communication with vhost net sometimes stops until
guest driver is restarted. This happens when we get guest kick precisely
when the backend send queue is full, as a result handle_tx() returns without
polling backend. This patch fixes this by restarting tx poll on this condition.
Signed-off-by: NSridhar Samudrala <samudrala@us.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NTom Lendacky <toml@us.ibm.com>

get_user_pages_fast returns number of pages on success, negative value
on failure, but never 0. Fix vhost code to match this logic.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vq log eventfd context pointer needs to be initialized, otherwise
operation may fail or oops if log is enabled but log eventfd not set by
userspace.  When log_ctx for device is created, it is copied to the vq.
This reset was missing.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

vhost was dong some complex math to get
offset to log at, and got it wrong by a couple of bytes,
while in fact it's simple: get address where we write,
subtract start of buffer, add log base.

Do it this way.
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

also added missed locking in rndis_wlan.c
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NETIF_F_NTUPLE flag setting introduced a bug:  non-ntuple flags
like LRO may be successfully set, before ioctl(2) returns failure
to userspace.

The set-flags operation should be all-or-none, rather than leaving
things in an inconsistent state prior to reporting failure to
userspace.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Apparently bogus mc address can break IPOIB multicast processing. Therefore
returning the check for addrlen back until this is resolved in bonding (I don't
see any other point from where mc address with non-dev->addr_len length can came
from).
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Inode field in /proc/net/{tcp,udp,packet,raw,...} is useful to know the types of
file descriptors associated to a process. Actually lsof utility uses the field.
Unfortunately, unlike /proc/net/{tcp,udp,packet,raw,...}, /proc/net/netlink doesn't have the field.
This patch adds the field to /proc/net/netlink.
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

axnet_cs:
  add new id (corega PCC-TXM)
Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the user to the IGMP parameters related to the
snooping function of the bridge.  This includes various time
values and retransmission limits.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the user to control the hash elasticity/max
parameters.  The elasticity setting does not take effect until
the next new multicast group is added.  At which point it is
checked and if after rehashing it still can't be satisfied then
snooping will be disabled.

The max setting on the other hand takes effect immediately.  It
must be a power of two and cannot be set to a value less than the
current number of multicast group entries.  This is the only way
to shrink the multicast hash.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the user to disable IGMP snooping completely
through a sysfs toggle.  It also allows the user to reenable
snooping when it has been automatically disabled due to hash
collisions.  If the collisions have not been resolved however
the system will refuse to reenable snooping.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the user to forcibly enable/disable ports as
having multicast routers attached.  A port with a multicast router
will receive all multicast traffic.

The value 0 disables it completely.  The default is 1 which lets
the system automatically detect the presence of routers (currently
this is limited to picking up queries), and 2 means that the port
will always receive all multicast traffic.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch finally hooks up the multicast snooping module to the
data path.  In particular, all multicast packets passing through
the bridge are fed into the module and switched by it.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch hooks up the bridge start/stop and add/delete/disable
port functions to the new multicast module.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds code to perform selective multicast forwarding.

We forward multicast traffic to a set of ports plus all multicast
router ports.  In order to avoid duplications among these two
sets of ports, we order all ports by the numeric value of their
pointers.  The two lists are then walked in lock-step to eliminate
duplicates.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the core functionality of IGMP snooping support
without actually hooking it up.  So this patch should be a no-op
as far as the bridge's external behaviour is concerned.

All the new code and data is controlled by the Kconfig option
BRIDGE_IGMP_SNOOPING.  A run-time toggle is also available.

The multicast switching is done using an hash table that is
lockless on the read-side through RCU.  On the write-side the
new multicast_lock is used for all operations.  The hash table
supports dynamic growth/rehashing.

The hash table will be rehashed if any chain length exceeds a
preset limit.  If rehashing does not reduce the maximum chain
length then snooping will be disabled.

These features may be added in future (in no particular order):

* IGMPv3 source support
* Non-querier router detection
* IPv6
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the main loop body in br_flood into the function
may_deliver.  The code that clones an skb and delivers it is moved
into the deliver_clone function.

This allows this to be reused by the future multicast forward
function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this patch makes BR_INPUT_SKB_CB available on the xmit path so
that we could avoid passing the br pointer around for the purpose
of collecting device statistics.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the packet is delivered to the local bridge device we may
end up cloning it unnecessarily if no bridge port can receive
the packet in br_flood.

This patch avoids this by moving the skb_clone into br_flood.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows tail-call on the call to br_pass_frame_up
in br_handle_frame_finish.  This is now possible because of the
previous patch to call br_pass_frame_up last.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the moment we deliver to the local bridge port via the function
br_pass_frame_up before all other ports.  There is no requirement
for this.

For the purpose of IGMP snooping, it would be more convenient if
we did the local port last.  Therefore this patch rearranges the
bridge input processing so that the local bridge port gets to see
the packet last (if at all).
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The pointer data can point to the variable ctv.
Access to data happens when ctv is already out of scope.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that the VPD searching code is abstracted away, the outer loop used
to detect the read-only large resource data type section is useless.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the pci_vpd_find_info_keyword() helper function to
find information field keywords within read-only and read-write large
resource data type sections.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a preprocessor constant to describe the PCI VPD
information field header size and an inline function to extract the
size of the information field itself.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the pci_vpd_find_tag() helper function to find VPD
resource data types in a buffer.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces more VPD preprocessor definitions to identify some
small and large resource data type item names.  The patch then continues
to correct how the tg3 and bnx2 drivers search for the "read-only data"
large resource data type.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a preprocessor constant to describe the PCI VPD large
resource data type tag size and an inline function to extract the large
resource section size from the large resource data type tag.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Bluetooth SIG PTS test case: TC_AG_ACS_BV_10_I, rejects eSCO with
"Unsupported Feature or Parameter Value" (0x11).  This patch adds case
for SCO fallback.

2007-09-20 12:20:37.787747 > HCI Event: Number of Completed Packets (0x13) plen 5
   handle 38 packets 1
2007-09-20 12:20:37.842154 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
   handle 38 voice setting 0x0060
2007-09-20 12:20:37.847037 > HCI Event: Command Status (0x0f) plen 4
   Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2007-09-20 12:20:37.855233 > HCI Event: Max Slots Change (0x1b) plen 3
   handle 38 slots 1
2007-09-20 12:20:39.913354 > HCI Event: Synchronous Connect Complete (0x2c) plen 17
   status 0x11 handle 38 bdaddr 00:16:93:01:01:7A type eSCO
   Error: Unsupported Feature or Parameter Value
2007-09-20 12:20:39.922629 > HCI Event: Max Slots Change (0x1b) plen 3
   handle 38 slots 5
2007-09-20 12:20:58.126886 < ACL data: handle 38 flags 0x02 dlen 8
   L2CAP(d): cid 0x0041 len 4 [psm 0]
     0000: 0b 53 01 b8                                       .S..
2007-09-20 12:20:58.130138 > HCI Event: Number of Completed Packets (0x13) plen 5
   handle 38 packets 1
Signed-off-by: NStephen Coe <smcoe1@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

With the Bluetooth 3.0 specification and the introduction of alternate
MAC/PHY (AMP) support, it is required to differentiate between primary
BR/EDR controllers and 802.11 AMP controllers. So introduce a special
type inside HCI device for differentiation.

For now all AMP controllers will be treated as raw devices until an
AMP manager has been implemented.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The debugfs support of the Marvell driver is buggy. It is limited to one
controller per system. Fix this by using the controller specific debugfs
directory as parent.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The output of the inquiry cache is only useful for debugging purposes
and so move it into debugfs.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The hdev->type is misnamed and should be actually hdev->bus instead. So
convert it now.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Add a couple kfree() calls on an error path.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>