Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NPawel Osciak <pawel@osciak.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* poll: (5970 commits)
  poll: add poll_requested_events() and poll_does_not_wait() functions
  crc32: select an algorithm via Kconfig
  crc32: add self-test code for crc32c
  crypto: crc32c should use library implementation
  crc32: bolt on crc32c
  crc32: add note about this patchset to crc32.c
  crc32: optimize loop counter for x86
  crc32: add slice-by-8 algorithm to existing code
  crc32: make CRC_*_BITS definition correspond to actual bit counts
  crc32: fix mixing of endian-specific types
  crc32: miscellaneous cleanups
  crc32: simplify unit test code
  crc32: move long comment about crc32 fundamentals to Documentation/
  crc32: remove two instances of trailing whitespaces
  checkpatch: check for quoted strings broken across lines
  checkpatch: whitespace - add/remove blank lines
  checkpatch: warn on use of yield()
  checkpatch: add --strict tests for braces, comments and casts
  checkpatch: add [] to type extensions
  checkpatch: high precedence operators do not require additional parentheses in #defines
  ...

In some cases the poll() implementation in a driver has to do different
things depending on the events the caller wants to poll for.  An example
is when a driver needs to start a DMA engine if the caller polls for
POLLIN, but doesn't want to do that if POLLIN is not requested but instead
only POLLOUT or POLLPRI is requested.  This is something that can happen
in the video4linux subsystem among others.

Unfortunately, the current epoll/poll/select implementation doesn't
provide that information reliably.  The poll_table_struct does have it: it
has a key field with the event mask.  But once a poll() call matches one
or more bits of that mask any following poll() calls are passed a NULL
poll_table pointer.

Also, the eventpoll implementation always left the key field at ~0 instead
of using the requested events mask.

This was changed in eventpoll.c so the key field now contains the actual
events that should be polled for as set by the caller.

The solution to the NULL poll_table pointer is to set the qproc field to
NULL in poll_table once poll() matches the events, not the poll_table
pointer itself.  That way drivers can obtain the mask through a new
poll_requested_events inline.

The poll_table_struct can still be NULL since some kernel code calls it
internally (netfs_state_poll() in ./drivers/staging/pohmelfs/netfs.h).  In
that case poll_requested_events() returns ~0 (i.e.  all events).

Very rarely drivers might want to know whether poll_wait will actually
wait.  If another earlier file descriptor in the set already matched the
events the caller wanted to wait for, then the kernel will return from the
select() call without waiting.  This might be useful information in order
to avoid doing expensive work.

A new helper function poll_does_not_wait() is added that drivers can use
to detect this situation.  This is now used in sock_poll_wait() in
include/net/sock.h.  This was the only place in the kernel that needed
this information.

Drivers should no longer access any of the poll_table internals, but use
the poll_requested_events() and poll_does_not_wait() access functions
instead.  In order to enforce that the poll_table fields are now prepended
with an underscore and a comment was added warning against using them
directly.

This required a change in unix_dgram_poll() in unix/af_unix.c which used
the key field to get the requested events.  It's been replaced by a call
to poll_requested_events().

For qproc it was especially important to change its name since the
behavior of that field changes with this patch since this function pointer
can now be NULL when that wasn't possible in the past.

Any driver accessing the qproc or key fields directly will now fail to compile.

Some notes regarding the correctness of this patch: the driver's poll()
function is called with a 'struct poll_table_struct *wait' argument.  This
pointer may or may not be NULL, drivers can never rely on it being one or
the other as that depends on whether or not an earlier file descriptor in
the select()'s fdset matched the requested events.

There are only three things a driver can do with the wait argument:

1) obtain the key field:

	events = wait ? wait->key : ~0;

   This will still work although it should be replaced with the new
   poll_requested_events() function (which does exactly the same).
   This will now even work better, since wait is no longer set to NULL
   unnecessarily.

2) use the qproc callback. This could be deadly since qproc can now be
   NULL. Renaming qproc should prevent this from happening. There are no
   kernel drivers that actually access this callback directly, BTW.

3) test whether wait == NULL to determine whether poll would return without
   waiting. This is no longer sufficient as the correct test is now
   wait == NULL || wait->_qproc == NULL.

   However, the worst that can happen here is a slight performance hit in
   the case where wait != NULL and wait->_qproc == NULL. In that case the
   driver will assume that poll_wait() will actually add the fd to the set
   of waiting file descriptors. Of course, poll_wait() will not do that
   since it tests for wait->_qproc. This will not break anything, though.

   There is only one place in the whole kernel where this happens
   (sock_poll_wait() in include/net/sock.h) and that code will be replaced
   by a call to poll_does_not_wait() in the next patch.

   Note that even if wait->_qproc != NULL drivers cannot rely on poll_wait()
   actually waiting. The next file descriptor from the set might match the
   event mask and thus any possible waits will never happen.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NJonathan Corbet <corbet@lwn.net>
Reviewed-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the kernel builder to choose a crc32* algorithm for the kernel.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add self-test code for crc32c.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since lib/crc32.c now provides crc32c, remove the software implementation
here and call the library function instead.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reuse the existing crc32 code to stamp out a crc32c implementation.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a comment at the top of crc32.c

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add two changes that improve the performance of x86 systems

1. replace main loop with incrementing counter this change improves
   the performance of the selftest by about 5-6% on Nehalem CPUs.  The
   apparent reason is that the compiler can use the loop index to perform
   an indexed memory access.  This is reported to make the performance of
   PowerPC CPUs to get worse.

2. replace the rem_len loop with incrementing counter this change
   improves the performance of the selftest, which has more than the usual
   number of occurances, by about 1-2% on x86 CPUs.  In actual work loads
   the length is most often a multiple of 4 bytes and this code does not
   get executed as often if at all.  Again this change is reported to make
   the performance of PowerPC get worse.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add slicing-by-8 algorithm to the existing slicing-by-4 algorithm.  This
consists of:

- extend largest BITS size from 32 to 64
- extend tables from tab[4][256] to up to tab[8][256]
- Add code for inner loop.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

crc32.c provides a choice of one of several algorithms for computing the
LSB and LSB versions of the CRC32 checksum based on the parameters
CRC_LE_BITS and CRC_BE_BITS.

In the original version the values 1, 2, 4 and 8 respectively selected
versions of the alrogithm that computed the crc 1, 2, 4 and 32 bits as a
time.

This patch series adds a new version that computes the CRC 64 bits at a
time.  To make things easier to understand the parameter has been
reinterpreted to actually stand for the number of bits processed in each
step of the algorithm so that the old value 8 has been replaced with the
value 32.

This also allows us to add in a widely used crc algorithm that computes
the crc 8 bits at a time called the Sarwate algorithm.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

crc32.c in its original version freely mixed u32, __le32 and __be32 types
which caused warnings from sparse with __CHECK_ENDIAN__.  This patch fixes
these by forcing the types to u32.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Misc cleanup of lib/crc32.c and related files.

- remove unnecessary header files.

- straighten out some convoluted ifdef's

- rewrite some references to 2 dimensional arrays as 1 dimensional
  arrays to make them correct.  I.e.  replace tab[i] with tab[0][i].

- a few trivial whitespace changes

- fix a warning in gen_crc32tables.c caused by a mismatch in the type of
  the pointer passed to output table.  Since the table is only used at
  kernel compile time, it is simpler to make the table big enough to hold
  the largest column size used.  One cannot make the column size smaller
  in output_table because it has to be used by both the le and be tables
  and they can have different column sizes.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the unit test provided in crc32.c, which doesn't have a makefile
and doesn't compile with current headers, with a simpler self test
routine that also gives a measure of performance and runs at module init
time.  The self test option can be enabled through a configuration
option CONFIG_CRC32_SELFTEST.

The test stresses the pre and post loops and is thus not very realistic
since actual uses will likely have addresses and lengths that are at
least 4 byte aligned.  However, the main loop is long enough so that the
performance is dominated by that loop.

The expected values for crc32_le and crc32_be were generated with the
original version of crc32.c using CRC_BITS_LE = 8 and CRC_BITS_BE = 8.
These values were then used to check all the values of the BITS
parameters in both the original and new versions.

The performance results show some variability from run to run in spite
of attempts to both warm the cache and reduce the amount of OS noise by
limiting interrutps during the test.  To get comparable results and to
analyse options wrt performance the best time reported over a small
sample of runs has been taken.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move a long comment from lib/crc32.c to Documentation/crc32.txt where it
will more likely get read.

Edited the resulting document to add an explanation of the slicing-by-n
algorithm.

[djwong@us.ibm.com: minor changelog tweaks]
[akpm@linux-foundation.org: fix typo, per George]
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset (re)uses Bob Pearson's crc32 slice-by-8 code to stamp out
a software crc32c implementation.  It removes the crc32c implementation
in crypto/ in favor of using the stamped-out one in lib/.  There is also
a change to Kconfig so that the kernel builder can pick an
implementation best suited for the hardware.

The motivation for this patchset is that I am working on adding full
metadata checksumming to ext4.  As far as performance impact of adding
checksumming goes, I see nearly no change with a standard mail server
ffsb simulation.  On a test that involves only file creation and
deletion and extent tree writes, I see a drop of about 50 pcercent with
the current kernel crc32c implementation; this improves to a drop of
about 20 percent with the enclosed crc32c code.

When metadata is usually a small fraction of total IO, this new
implementation doesn't help much because metadata is usually a small
fraction of total IO.  However, when we are doing IO that is almost all
metadata (such as rm -rf'ing a tree), then this patch speeds up the
operation substantially.

Incidentally, given that iscsi, sctp, and btrfs also use crc32c, this
patchset should improve their speed as well.  I have not yet quantified
that, however.  This latest submission combines Bob's patches from late
August 2011 with mine so that they can be one coherent patch set.
Please excuse my inability to combine some of the patches; I've been
advised to leave Bob's patches alone and build atop them instead.  :/

Since the last posting, I've also collected some crc32c test results on
a bunch of different x86/powerpc/sparc platforms.  The results can be
viewed here: http://goo.gl/sgt3i ; the "crc32-kern-le" and "crc32c"
columns describe the performance of the kernel's current crc32 and
crc32c software implementations.  The "crc32c-by8-le" column shows
crc32c performance with this patchset applied.  I expect crc32
performance to be roughly the same.

The two _boost columns at the right side of the spreadsheet shows how much
faster the new implementation is over the old one.  As you can see, crc32
rises substantially, and crc32c experiences a huge increase.

This patch:

- remove trailing whitespace from lib/crc32.c
- remove trailing whitespace from lib/crc32defs.h

[djwong@us.ibm.com: changelog tweaks]
Signed-off-by: NBob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

checkpatch already makes an exception to the 80-column rule for quoted
strings, and Documentation/CodingStyle recommends not splitting quoted
strings across lines, because it breaks the ability to grep for the
string.  Rather than just permitting this, actively warn about quoted
strings split across lines.

Test case:

void context(void)
{
	struct { unsigned magic; const char *strdata; } foo[] = {
		{ 42, "these strings"
		      "do not produce warnings" },
		{ 256, "though perhaps"
		       "they should" },
	};
	pr_err("this string"
	       " should produce a warning\n");
	pr_err("this multi-line string\n"
	       "should not produce a warning\n");
	asm ("this asm\n\t"
	     "should not produce a warning");
}

Results of checkpatch on that test case:

WARNING: quoted string split across lines
+	       " should produce a warning\n");

total: 0 errors, 1 warnings, 15 lines checked
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add blank lines between a few tests, remove an extraneous one.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using yield() is generally wrong.  Warn on its use.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add some more subjective --strict tests.

Add a test for block comments that start with a blank line followed only
by a line with just the comment block initiator.  Prefer a blank line
followed by /* comment...

Add a test for unnecessary spaces after a cast.

Add a test for symmetric uses of braces in if/else blocks.
If one branch needs braces, then all branches should use braces.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add [] to a type extensions.  Fixes false positives on:

    .attrs = (struct attribute *[]) {
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With any very high precedence operator it is not necessary to enforce
additional parentheses around simple negated expressions.  This prevents
us requesting further perentheses around the following:

    #define PMEM_IS_FREE(id, index) !(pmem[id].bitmap[index].allocated)

For now add logical and bitwise not and unary minus.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adjacent strings indicate concatentation, therefore look at identifiers
directly adjacent to literal strings as strings too.  This allows us to
better detect the form below and accept it as a simple constant:

    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle the [ A ... B ] form deeper into a definition, for example:

    static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
	    {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
	    {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
    };
Reported-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix checkpatch.pl when both -q and --ignore are given and prevents it from
printing a

NOTE: Ignored message types: blah

messages.

E.g., if I use -q --ignore PREFER_PACKED,PREFER_ALIGNED, i see:

NOTE: Ignored message types: PREFER_ALIGNED PREFER_PACKED

It makes no sense to print this when -q is given.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Argument alignment across multiple lines should match the open
parenthesis.

Logical continuations should be at the end of the previous line, not the
start of a new line.

These are not required by CodingStyle so make the tests active only when
using --strict.

Improved by some examples from Bruce Allen.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Bruce W. Allen" <bruce.w.allan@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's equivalent to __printf, so prefer __scanf.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce prio_set_parent() to abstract the operation which is used to
attach the node to its parent.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In current code, the deleted-node is recorded from first to last,
actually, we can directly attach these node on 'node' we will insert as
the left child, it can let the code more readable.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce iter_walk_down()/iter_walk_up() to remove the common code
between prio_tree_left() and prio_tree_right().
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the code since 'node' has already been initialized in the begin of
the function
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- Generate a 64-bit pattern more efficiently

memchr_inv needs to generate a 64-bit pattern filled with a target
character.  The operation can be done by more efficient way.

- Don't call the slow check_bytes() if the memory area is 64-bit aligned

memchr_inv compares contiguous 64-bit words with the 64-bit pattern as
much as possible.  The outside of the region is checked by check_bytes()
that scans for each byte.  Unfortunately, the first 64-bit word is
unexpectedly scanned by check_bytes() even if the memory area is aligned
to a 64-bit boundary.

Both changes were originally suggested by Eric Dumazet.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After moving some core functions to led-core.c, led-class.c can be built
as module again.
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
Acked-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Improve the readability by moving the code setting gen_config to one
place.

[akpm@linux-foundation.org: fix some patch skew]
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Cc: "Milo(Woogyom) Kim" <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use 'pdata' rather than 'pltfm' in lm3530_init_registers().
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LM3530_ALS_ZONE_REG is read-only register.
Writing this register is not necessary.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>