提交 · 0ded2f146acfaf71e5f4c15b80cf89b3af48134c · openanolis / cloud-kernel

03 3月, 2010 40 次提交

USB: musb: set version of Blackfin version · 0ded2f14

由 Cliff Cai 提交于 1月 28, 2010

All current Blackfin parts are using RTL v1.9, but they don't expose the
hardware registers to probe this dynamically.  So hardcode the version to
v1.9 for now.

Need to move the local hwvers related defines higher up in the header so
that sub-musb headers may utilize them.
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

0ded2f14

USB: pxa27x_udc: Fix deadlocks on request queueing · 5e23e90f

由 Robert Jarzmik 提交于 1月 27, 2010

As reported by Antonio, there are cases where the ep->lock
can be taken twice, triggering a deadlock.
The typical sequence is :
 irq_handler
   \
    -> gadget.complete()
       \
        -> pxa27x_udc.pxa_ep_queue() : ep->lock is taken
           \
            -> gadget.complete()
               \
                -> pxa27x_udc.pxa_ep_queue() : ep->lock is taken
                                               ==> *deadlock*
The patch fixes this by :
 - releasing the lock each time gadget.complete() is called
 - adding a check in handle_ep() to detect a recursive call,
   in which case the function becomes on no-op.

The patch is still not good enough for ep0. For this unique
endpoint, another well thought over patch will be needed.
Reported-by: NAntonio Ospite <ospite@studenti.unina.it>
Tested-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

5e23e90f

USB: serial: add support for serial port on the moschip 7715 · fb088e33

由 Mike Dunn 提交于 1月 26, 2010

Add support for the serial port on devices based on the MosChip 7715,
which provides a serial and parallel port on a single usb interface.
This is added to the existing driver for the Moschip 7720 dual serial
port device. The 7715 is very similiar to the 7720, requiring only the
addition of a calc_num_ports() function, a separate interrupt-in
endpoint callback, and some manipulation of the port pointers added to
the attach() function to correct the fact that the usbserial core
erroneously assigns the first bulk in/out endpoint pair to the serial
port (the 7715 uses these for its parallel port). There is no support
for the 7715's parallel port yet.
Signed-off-by: NMike Dunn <mikedunn@newsguy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fb088e33

USB: io_edgeport: eliminate get_string() · f10718f5

由 Dan Carpenter 提交于 1月 25, 2010

Johan Hovold points out that get_string() is basically just a
re-implimentation of usb_string().  It is also buggy.  It does DMA on
the stack and it doesn't handle negative returns from
usb_get_descriptor().  Plus unicode_to_ascii() is a rubbish function and
moving to usb_string() avoids using it.

Let's eliminate get_string() entirely.
Reported-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

f10718f5

USB: s3c-hsotg: replace deprecated dma_sync_single() · 5b520259

由 FUJITA Tomonori 提交于 1月 25, 2010

This replaces deprecated dma_sync_single() with dma_sync_single_for_cpu().

There is no functional change because dma_sync_single() simply calls
dma_sync_single_for_cpu():

static inline void __deprecated dma_sync_single(struct device *dev,
       	      	   				dma_addr_t addr, size_t size,
						enum dma_data_direction dir)
{
	dma_sync_single_for_cpu(dev, addr, size, dir);
}

This fixes the following compile warnings:

drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_unmap_dma':
drivers/usb/gadget/s3c-hsotg.c:376: warning: 'dma_sync_single' is deprecated (declared at /home/fujita/git/linux-2.6/include/linux/dma-mapping.h:109)
drivers/usb/gadget/s3c-hsotg.c: In function 's3c_hsotg_map_dma':
drivers/usb/gadget/s3c-hsotg.c:758: warning: 'dma_sync_single' is deprecated (declared at /home/fujita/git/linux-2.6/include/linux/dma-mapping.h:109)
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

5b520259

USB: musb: only print info message if probe() is successful · ab3bbfa1