QDI65x0 controllers are fully supported by pata_legacy driver
so remove no longer needed pata_qdi driver.

Leave PATA_QDI config option for compatibility reasons and teach
pata_legacy to preserve the old behavior of pata_qdi driver.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Rename 'idetm_port' and 'idetm_data' variables to 'master_port'
and 'master_data' respectively to match register naming used in
it8213_set_dmamode() and in ata_piix.c.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fixes IDE -> libata regression.

IDE's it8213 host driver has been supporting those modes
(per official documentation) since the initial driver's merge
on Feb 7 2007 (commit 9c6712c0 "ide: add it8213 IDE driver").
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This is similar change as commit 60c3be38 ("ata_piix: parallel scanning
on PATA needs an extra locking") for ata_piix host driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* Fix via_init_one() to enable clock on 66 MHz devices
  (bug introduced in commit 460f5318 "pata_via: store UDMA masks
   in via_isa_bridges table").

* Factor out common code from via_[re]init_one() to via_fixup().
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

XFER_SW_DMA_0 mode should be excluded from the extended cycle timing
computations.
Acked-by: NAlan Cox <alan@linux.intel.com>
Noticed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use standard ata_cable_80wire() method for the cable detection,
as a bonus this allows us to use the default ->prereset method.
Acked-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NAkira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The suspend()/resume() methods already get the right 'struct device' to get the
driver data from -- there's no need to get to the 'struct platform_device' that
contains that 'struct device' just to call dev_get_drvdata()...
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fixes PCI access before PCI resources are allocated.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Factor out common code from serverworks_[re]init_one() to
serverworks_fixup().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Merge identical cable routines for Dell and Sun systems into
common oem_cable() one.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Cosmetic fix but thanks to it pata_ali's DMI table now matches
alim15x3's one.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Core libata code takes care of it nowadays.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup().

Remove stale comment and fix a minor CodingStyle issue while at it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Factor out code for finding the register programming information
from hpt366_set_mode() to hpt36x_find_mode().

This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets.

* Fix ->prereset documentation while at it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Turn both helpers (which are used only during LLDs initialization
time and thus are not performance sensitive) into wrappers around
the new ata_pci_init_one() function, this cuts 20 LOC and saves
~1.1k of the output code size (x86-64):

 text    data     bss     dec     hex filename
  21392       0      19   21411    53a3 drivers/ata/libata-sff.o.before
  20256       0      19   20275    4f33 drivers/ata/libata-sff.o.after
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

.. and also a module description while at it.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Constify tables in sil680_set_[pio,dma]mode().
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fix documentation for sil680_sel[reg,dev]() and sil680_set_[pio,dma]mode().
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch adds missing #includes, makes the driver selectable on
non-PPC OF-enabled platforms and fixes property value accesses to
be correct in Little Endian system.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Remove a lot of '  ' (double spaces) as well as ensuring use of tabs vs.
spaces is appropriate and consistent.
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This pushes timing and other values into preinitialized read-only data
sections rather than being inlined into the code. None of these
functions are called more than a handful of times, so reducing code size
makes sense.
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This ports the timing values over from the old IDE driver into the new
PATA-based one. The comment was lying when it stated the old driver was
not MWDMA capable.

Boot tested on actual hardware using 'libata.force=mwdma2'.
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This mirrors a very old commit (3160d541, "sis5513: add
->udma_filter method for chipset_family >= ATA_133") to the old sis5513
IDE driver that prevents certain setups from working.

UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure
this mode is not chosen even if a connected drive supports it. Port this
old patch forward to the new PATA driver to ensure UDMA5 is the highest
mode used if that is what is supported.

Kernel bugzilla #41582.
Reviewed-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This is similar to the existing sis_old_port_base() method. We do this
same calculation and logic in multiple places (with one more to come in
a future patch), so extracting it into a method makes sense.
Reviewed-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

On imx53 AHCI, soft reset fails with IPMS set when PMP
is enabled but SATA HDD/ODD is connected to SATA port,
do soft reset again to port 0.
So the 'ahci_pmp_retry_srst_ops' is required when imx53
ahci is present.
Signed-off-by: NRichard Zhu <richard.zhu@linaro.org>
Acked-by: NEric Miao <eric.miao@linaro.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

... since it does not use it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Reduce data by using const.

$ size drivers/ata/sata_sil24.o*
   text	   data	    bss	    dec	    hex	filename
  12764	    614	   2688	  16066	   3ec2	drivers/ata/sata_sil24.o.new
  12320	   1058	   2688	  16066	   3ec2	drivers/ata/sata_sil24.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This quirk patch fixes one kind of bug inside some Intel Sandybridge
chipsets, see reports from

       https://bugzilla.kernel.org/show_bug.cgi?id=40592.

Many guys also have reported the problem before:

	https://bugs.launchpad.net/bugs/737388
	https://bugs.launchpad.net/bugs/794642
	https://bugs.launchpad.net/bugs/782389
	......

With help from Tejun, the problem is found to be caused by 32bit PIO
mode, so introduce the quirk patch to disable 32bit PIO on SATA piix
for some Sandybridge CPT chipsets.

Seth also tested the patch on all five affected chipsets
(pci device ID: 0x1c00, 0x1c01, 0x1d00, 0x1e00, 0x1e01), and found
the patch does fix the problem.
Tested-by: NHeasley, Seth <seth.heasley@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Acked-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org

ata_sff_data_xfer[32]() use pad area if the transfer size isn't
multiple of transfer size; however, this area wasn't cleared and
garbage data in pad area could be transferred to the device.  Make
sure the pad area is cleared.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Lei Ming <tom.leiming@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The driver uses dev_get_drvdata() to get to the driver data for the
platform and PCI devices, while the corresponding wrappers exists for
them -- in one case it even declares an otherwise unneeded variable
to do that.  Switch to using the {platform|pci}_get_drvdata() instead.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

mv_platfrom_probe() forgets to call clk_disable() and clk_put() iff
ata_host_activate() fails...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>