- 15 7月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 12 7月, 2013 3 次提交
-
-
由 Peter Zijlstra 提交于
Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by: NJiri Olsa <jolsa@redhat.com> Helped-out-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The '!ctx->is_active' check has a valid scenario, so there's no need for the warning. The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having: - IRQs on - ctx->lock unlocked where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below. So remove the WARN_ON_ONCE() check and add comments to explain it all. This addresses the following warning reported by Vince Weaver: [ 324.983534] ------------[ cut here ]------------ [ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190() [ 324.984420] Modules linked in: [ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246 [ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ 324.984420] 0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00 [ 324.984420] ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860 [ 324.984420] 0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a [ 324.984420] Call Trace: [ 324.984420] <IRQ> [<ffffffff8160ea0b>] dump_stack+0x19/0x1b [ 324.984420] [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0 [ 324.984420] [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20 [ 324.984420] [<ffffffff81134437>] __perf_event_enable+0x187/0x190 [ 324.984420] [<ffffffff81130030>] remote_function+0x40/0x50 [ 324.984420] [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130 [ 324.984420] [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40 [ 324.984420] [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80 [ 324.984420] <EOI> [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70 [ 324.984420] [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210 [ 324.984420] [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60 [ 324.984420] [<ffffffff81086946>] do_exit+0x2b6/0xa40 [ 324.984420] [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30 [ 324.984420] [<ffffffff81087279>] do_group_exit+0x49/0xc0 [ 324.984420] [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620 [ 324.984420] [<ffffffff81043057>] do_signal+0x57/0x5a0 [ 324.984420] [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0 [ 324.984420] [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe [ 324.984420] [<ffffffff816166cd>] ? retint_signal+0x11/0x84 [ 324.984420] [<ffffffff81043605>] do_notify_resume+0x65/0x80 [ 324.984420] [<ffffffff81616702>] retint_signal+0x46/0x84 [ 324.984420] ---[ end trace 442ec2f04db3771a ]--- Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1373384651-6109-2-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1373384651-6109-1-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 7月, 2013 1 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes a serious bug in: 14c63f17 perf: Drop sample rate when sampling is too slow There was an misunderstanding on the API of the do_div() macro. It returns the remainder of the division and this was not what the function expected leading to disabling the interrupt latency watchdog. This patch also remove a duplicate assignment in perf_sample_event_took(). Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: dave.hansen@linux.intel.com Cc: ak@linux.intel.com Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/20130704223010.GA30625@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 23 6月, 2013 1 次提交
-
-
由 Dave Hansen 提交于
This patch keeps track of how long perf's NMI handler is taking, and also calculates how many samples perf can take a second. If the sample length times the expected max number of samples exceeds a configurable threshold, it drops the sample rate. This way, we don't have a runaway sampling process eating up the CPU. This patch can tend to drop the sample rate down to level where perf doesn't work very well. *BUT* the alternative is that my system hangs because it spends all of its time handling NMIs. I'll take a busted performance tool over an entire system that's busted and undebuggable any day. BTW, my suspicion is that there's still an underlying bug here. Using the HPET instead of the TSC is definitely a contributing factor, but I suspect there are some other things going on. But, I can't go dig down on a bug like that with my machine hanging all the time. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus@samba.org Cc: acme@ghostprotocols.net Cc: Dave Hansen <dave@sr71.net> [ Prettified it a bit. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 6月, 2013 7 次提交
-
-
由 Oleg Nesterov 提交于
This patch simply moves all per-cpu variables into the new single per-cpu "struct bp_cpuinfo". To me this looks more logical and clean, but this can also simplify the further potential changes. In particular, I do not think this memory should be per-cpu, it is never used "locally". After this change it is trivial to turn it into, say, bootmem[nr_cpu_ids]. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20130620155020.GA6350@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
1. register_wide_hw_breakpoint() can use unregister_ if failure, no need to duplicate the code. 2. "struct perf_event **pevent" adds the unnecesary lever of indirection and complication, use per_cpu(*cpu_events, cpu). Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20130620155018.GA6347@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
Add the trivial helper which simply returns cpumask_of() or cpu_possible_mask depending on bp->cpu. Change fetch_bp_busy_slots() and toggle_bp_slot() to always do for_each_cpu(cpumask_of_bp) to simplify the code and avoid the code duplication. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20130620155015.GA6340@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
Change toggle_bp_slot() to make "weight" negative if !enable. This way we can always use "+ weight" without additional "if (enable)" check and toggle_bp_task_slot() no longer needs this arg. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20130620155013.GA6337@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
The enable/disable logic in toggle_bp_slot() is not symmetrical and imho very confusing. "old_count" in toggle_bp_task_slot() is actually new_count because this bp was already removed from the list. Change toggle_bp_slot() to always call list_add/list_del after toggle_bp_task_slot(). This way old_idx is task_bp_pinned() and this entry should be decremented, new_idx is +/-weight and we need to increment this element. The code/logic looks obvious. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20130620155011.GA6330@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
fetch_bp_busy_slots() and toggle_bp_slot() use for_each_online_cpu(), this is obviously wrong wrt cpu_up() or cpu_down(), we can over/under account the per-cpu numbers. For example: # echo 0 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10 -p 1 & # echo 1 >> /sys/devices/system/cpu/cpu1/online # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10 -C1 -a & # taskset -p 0x2 1 triggers the same WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint(). Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20130620155009.GA6327@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Oleg Nesterov 提交于
trinity fuzzer triggered WARN_ONCE("Can't find any breakpoint slot") in arch_install_hw_breakpoint() but the problem is not arch-specific. The problem is, task_bp_pinned(cpu) checks "cpu == iter->cpu" but this doesn't account the "all cpus" events with iter->cpu < 0. This means that, say, register_user_hw_breakpoint(tsk) can happily create the arbitrary number > HBP_NUM of breakpoints which can not be activated. toggle_bp_task_slot() is equally wrong by the same reason and nr_task_bp_pinned[] can have negative entries. Simple test: # perl -e 'sleep 1 while 1' & # perf record -e mem:0x10,mem:0x10,mem:0x10,mem:0x10,mem:0x10 -p `pidof perl` Before this patch this triggers the same problem/WARN_ON(), after the patch it correctly fails with -ENOSPC. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20130620155006.GA6324@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 19 6月, 2013 3 次提交
-
-
由 Mischa Jonker 提交于
This allows us to use pdev->name for registering a PMU device. IMO the name is not supposed to be changed anyway. Signed-off-by: NMischa Jonker <mjonker@synopsys.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1370339148-5566-1-git-send-email-mjonker@synopsys.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
Commit 2b923c8f perf/x86: Check branch sampling priv level in generic code was missing the check for the hypervisor (HV) priv level, so add it back. With this patch, we get the following correct behavior: # echo 2 >/proc/sys/kernel/perf_event_paranoid $ perf record -j any,k noploop 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid: -1 - Not paranoid at all 0 - Disallow raw tracepoint access for unpriv 1 - Disallow cpu events for unpriv 2 - Disallow kernel profiling for unpriv $ perf record -j any,hv noploop 1 Error: You may not have permission to collect stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid: -1 - Not paranoid at all 0 - Disallow raw tracepoint access for unpriv 1 - Disallow cpu events for unpriv 2 - Disallow kernel profiling for unpriv Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NPetr Matousek <pmatouse@redhat.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130606090204.GA3725@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Vince's fuzzer once again found holes. This time it spotted a leak in the locked page accounting. When an event had redirected output and its close() was the last reference to the buffer we didn't have a vm context to undo accounting. Change the code to destroy the buffer on the last munmap() and detach all redirected events at that time. This provides us the right context to undo the vm accounting. Reported-and-tested-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 5月, 2013 5 次提交
-
-
由 Peter Zijlstra 提交于
Vince reported a problem found by his perf specific trinity fuzzer. Al noticed 2 problems with perf's mmap(): - it has issues against fork() since we use vma->vm_mm for accounting. - it has an rb refcount leak on double mmap(). We fix the issues against fork() by using VM_DONTCOPY; I don't think there's code out there that uses this; we didn't hear about weird accounting problems/crashes. If we do need this to work, the previously proposed VM_PINNED could make this work. Aside from the rb reference leak spotted by Al, Vince's example prog was indeed doing a double mmap() through the use of perf_event_set_output(). This exposes another problem, since we now have 2 events with one buffer, the accounting gets screwy because we account per event. Fix this by making the buffer responsible for its own accounting. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
This patch moves commit 7cc23cd6 to the generic code: perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL The check is now implemented in generic code instead of x86 specific code. That way we do not have to repeat the test in each arch supporting branch sampling. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20130521105337.GA2879@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
This patch adds /sys/device/xxx/perf_event_mux_interval_ms to ajust the multiplexing interval per PMU. The unit is milliseconds. Value has to be >= 1. In the 4th version, we renamed the sysfs file to be more consistent with the other /proc/sys/kernel entries for perf_events. In the 5th version, we handle the reprogramming of the hrtimer using hrtimer_forward_now(). That way, we sync up to new timer value quickly (suggested by Jiri Olsa). Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1364991694-5876-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
The current scheme of using the timer tick was fine for per-thread events. However, it was causing bias issues in system-wide mode (including for uncore PMUs). Event groups would not get their fair share of runtime on the PMU. With tickless kernels, if a core is idle there is no timer tick, and thus no event rotation (multiplexing). However, there are events (especially uncore events) which do count even though cores are asleep. This patch changes the timer source for multiplexing. It introduces a per-PMU per-cpu hrtimer. The advantage is that even when a core goes idle, it will come back to service the hrtimer, thus multiplexing on system-wide events works much better. The per-PMU implementation (suggested by PeterZ) enables adjusting the multiplexing interval per PMU. The preferred interval is stashed into the struct pmu. If not set, it will be forced to the default interval value. In order to minimize the impact of the hrtimer, it is turned on and off on demand. When the PMU on a CPU is overcommited, the hrtimer is activated. It is stopped when the PMU is not overcommitted. In order for this to work properly, we had to change the order of initialization in start_kernel() such that hrtimer_init() is run before perf_event_init(). The default interval in milliseconds is set to a timer tick just like with the old code. We will provide a sysctl to tune this in another patch. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1364991694-5876-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The hw breakpoint pmu 'add' function is missing the period_left update needed for SW events. The perf HW breakpoint events use the SW events framework to process the overflow, so it needs to be properly initialized in the PMU 'add' method. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1367421944-19082-5-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 07 5月, 2013 2 次提交
-
-
由 Jiri Olsa 提交于
Add perf_event_aux() function to send out all types of auxiliary events - mmap, task, comm events. For each type there's match and output functions defined and used as callbacks during perf_event_aux processing. This way we can centralize the pmu/context iterating and event matching logic. Also since lot of the code was duplicated, this patch reduces the .text size about 2kB on my setup: snipped output from 'objdump -x kernel/events/core.o' before: Idx Name Size 0 .text 0000d313 after: Idx Name Size 0 .text 0000cad3 Signed-off-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1367857638-27631-3-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The perf_event_task_ctx() function needs to be called with preemption disabled, since it's checking for currently scheduled cpu against event cpu. We disable preemption for task related perf event context if there's one defined, leaving up to the chance which cpu it gets scheduled in. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1367857638-27631-2-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 01 5月, 2013 1 次提交
-
-
由 Jiri Olsa 提交于
If we allocate perf ring buffer with the size of single (user) page, we will get memory corruption when releasing itin rb_free_work function (for CONFIG_PERF_USE_VMALLOC option). For single page sized ring buffer the page_order is -1 (because nr_pages is 0). This needs to be recognized in the rb_free_work function to release proper amount of pages. Adding data_page_nr function that returns number of allocated data pages. Customizing the rest of the code to use it. Reported-by: NJan Stancek <jstancek@redhat.com> Original-patch-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20130319143509.GA1128@krava.brq.redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 23 4月, 2013 2 次提交
-
-
由 Frederic Weisbecker 提交于
Provide a new helper that help full dynticks CPUs to prevent from stopping their tick in case there are events in the local rotation list. This way we make sure that perf_event_task_tick() is serviced on demand. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com>
-
由 Frederic Weisbecker 提交于
Kick the current CPU's tick by sending it a self IPI when an event is queued on the rotation list and it is the first element inserted. This makes sure that perf_event_task_tick() works on full dynticks CPUs. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com>
-
- 21 4月, 2013 1 次提交
-
-
由 Paul E. McKenney 提交于
The following RCU splat indicates lack of RCU protection: [ 953.267649] =============================== [ 953.267652] [ INFO: suspicious RCU usage. ] [ 953.267657] 3.9.0-0.rc6.git2.4.fc19.ppc64p7 #1 Not tainted [ 953.267661] ------------------------------- [ 953.267664] include/linux/cgroup.h:534 suspicious rcu_dereference_check() usage! [ 953.267669] [ 953.267669] other info that might help us debug this: [ 953.267669] [ 953.267675] [ 953.267675] rcu_scheduler_active = 1, debug_locks = 0 [ 953.267680] 1 lock held by glxgears/1289: [ 953.267683] #0: (&sig->cred_guard_mutex){+.+.+.}, at: [<c00000000027f884>] .prepare_bprm_creds+0x34/0xa0 [ 953.267700] [ 953.267700] stack backtrace: [ 953.267704] Call Trace: [ 953.267709] [c0000001f0d1b6e0] [c000000000016e30] .show_stack+0x130/0x200 (unreliable) [ 953.267717] [c0000001f0d1b7b0] [c0000000001267f8] .lockdep_rcu_suspicious+0x138/0x180 [ 953.267724] [c0000001f0d1b840] [c0000000001d43a4] .perf_event_comm+0x4c4/0x690 [ 953.267731] [c0000001f0d1b950] [c00000000027f6e4] .set_task_comm+0x84/0x1f0 [ 953.267737] [c0000001f0d1b9f0] [c000000000280414] .setup_new_exec+0x94/0x220 [ 953.267744] [c0000001f0d1ba70] [c0000000002f665c] .load_elf_binary+0x58c/0x19b0 ... This commit therefore adds the required RCU read-side critical section to perf_event_comm(). Reported-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/20130419190124.GA8638@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NGustavo Luiz Duarte <gusld@br.ibm.com>
-
- 15 4月, 2013 1 次提交
-
-
由 Tommi Rantala 提交于
Trinity discovered that we fail to check all 64 bits of attr.config passed by user space, resulting to out-of-bounds access of the perf_swevent_enabled array in sw_perf_event_destroy(). Introduced in commit b0a873eb ("perf: Register PMU implementations"). Signed-off-by: NTommi Rantala <tt.rantala@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: davej@redhat.com Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 4月, 2013 6 次提交
-
-
由 Anton Arapov 提交于
Enclose return probes implementation. Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Anton Arapov 提交于
Unlike the kretprobes we can't trust userspace, thus must have protection from user space attacks. User-space have "unlimited" stack, and this patch limits the return probes nestedness as a simple remedy for it. Note that this implementation leaks return_instance on siglongjmp until exit()/exec(). The intention is to have KISS and bare minimum solution for the initial implementation in order to not complicate the uretprobes code. In the future we may come up with more sophisticated solution that remove this depth limitation. It is not easy task and lays beyond this patchset. Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Anton Arapov 提交于
Uretprobe handlers are invoked when the trampoline is hit, on completion the trampoline is replaced with the saved return address and the uretprobe instance deleted. TODO: handle_trampoline() assumes that ->return_instances is always valid. We should teach it to handle longjmp() which can invalidate the pending return_instance's. This is nontrivial, we will try to do this in a separate series. Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Anton Arapov 提交于
When a uprobe with return probe consumer is hit, prepare_uretprobe() function is invoked. It creates return_instance, hijacks return address and replaces it with the trampoline. * Return instances are kept as stack per uprobed task. * Return instance is chained, when the original return address is trampoline's page vaddr (e.g. recursive call of the probed function). Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Anton Arapov 提交于
Allocate trampoline page, as the very first one in uprobed task xol area, and fill it with breakpoint opcode. Also introduce get_trampoline_vaddr() helper, to wrap the trampoline address extraction from area->vaddr. That removes confusion and eases the debug experience in case ->vaddr notion will be changed. Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Anton Arapov 提交于
Enclose return probes implementation, introduce ->ret_handler() and update existing code to rely on ->handler() *and* ->ret_handler() for uprobe and uretprobe respectively. Signed-off-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
- 12 4月, 2013 1 次提交
-
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the allocation error case instead of 0 (if pmu_bus_running == 1), as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: acme@ghostprotocols.net Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%3DNTPU08c2w1tngQ@mail.gmail.com [ Tweaked the error code setting placement and the changelog. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 11 4月, 2013 1 次提交
-
-
由 Tejun Heo 提交于
perf_event is one of a couple remaining cgroup controllers with broken hierarchy support. Converting it to support hierarchy is almost trivial. The only thing necessary is to consider a task belonging to a descendant cgroup as a match. IOW, if the cgroup of the currently executing task (@cpuctx->cgrp) equals or is a descendant of the event's cgroup (@event->cgrp), then the event should be enabled. Implement hierarchy support and remove .broken_hierarchy tag along with the incorrect comment on what needs to be done for hierarchy support. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Stephane Eranian <eranian@google.com> Cc: Namhyung Kim <namhyung.kim@lge.com>
-
- 08 4月, 2013 1 次提交
-
-
由 Chen Gang 提交于
For NUL terminated string, always make sure that there's '\0' at the end. In our case we need a return value, so still use strncpy() and fix up the tail explicitly. (strlcpy() returns the size, not the pointer) Signed-off-by: NChen Gang <gang.chen@asianux.com> Cc: a.p.zijlstra@chello.nl <a.p.zijlstra@chello.nl> Cc: paulus@samba.org <paulus@samba.org> Cc: acme@ghostprotocols.net <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/51623E0B.7070101@asianux.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 04 4月, 2013 3 次提交
-
-
由 Oleg Nesterov 提交于
Change write_opcode() to use copy_highpage() + copy_to_page() and simplify the code. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
Extract the kmap_atomic/memcpy/kunmap_atomic code from xol_get_insn_slot() into the new simple helper, copy_to_page(). It will have more users soon. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
__copy_insn(filp) can only be called after valid_vma() returns T, vma->vm_file passed as "filp" can not be NULL. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NAnton Arapov <anton@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-