- 07 3月, 2013 1 次提交
-
-
由 Amitkumar Karwar 提交于
Host sleep wakeup condition is configured using this command. Supports Wake-on: pumb For examples: wake-on any unicast packets: ethtool -s mlan0 wol u wake-on multicast/broadcast packet: ethtool -s mlan0 wol mb wake-on unicast packets and MAC events: ethtool -s mlan0 wol pu wake-on unicast/multicast/broadcast packets and MAC events: ethtool -s mlan0 wol pmbu disable all wake-on options: ethtool -s mlan0 wol d Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 19 2月, 2013 1 次提交
-
-
由 Yogesh Ashok Powar 提交于
For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NFrank Huang <frankh@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 2月, 2013 1 次提交
-
-
由 Johannes Berg 提交于
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 05 2月, 2013 1 次提交
-
-
由 Joe Perches 提交于
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Remove now unused variables. Remove unnecessary memset after kzalloc->kcalloc. Whitespace cleanups for these changes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2013 1 次提交
-
-
由 Luis R. Rodriguez 提交于
The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: NLuis R. Rodriguez <mcgrof@do-not-panic.com> [move lbs_reg_notifier to not break compile] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 12 1月, 2013 2 次提交
-
-
由 Amitkumar Karwar 提交于
BAND_G is implicit when BAND_GN is present. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" <stable@vger.kernel.org> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 1月, 2013 1 次提交
-
-
由 Jiri Pirko 提交于
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2013 1 次提交
-
-
由 Avinash Patil 提交于
This patch adds support for parsing WMM IEs from hostapd and setting them to FW via sys configure command. Patch also sets wiphy flag to advertise AP uAPSD support. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 1月, 2013 1 次提交
-
-
由 Amitkumar Karwar 提交于
commit 683b6d3b... "cfg80211: pass a channel definition struct" accidentally changed "==" to "!=". Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 12月, 2012 1 次提交
-
-
由 Avinash Patil 提交于
This patch adds support for advertising GreenField, 40MHz intolerance or LDPC coding support to cfg80211. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 11月, 2012 2 次提交
-
-
由 Johannes Berg 提交于
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
As mwifiex (and mac80211 in the software case) are the only drivers actually implementing remain-on-channel with channel type, userspace can't be relying on it. This is the case, as it's used only for P2P operations right now. Rather than adding a flag to tell userspace whether or not it can actually rely on it, simplify all the code by removing the ability to use different channel types. Leave only the validation of the attribute, so that if we extend it again later (with the needed capability flag), it can't break userspace sending invalid data. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 15 11月, 2012 1 次提交
-
-
由 Avinash Patil 提交于
This patch adds support for multiple TX queues inside mwifiex driver. Four different queues according to WMM access categories are defined for each virtual interface. When a packet is received from netdev for transmission, tx pending count for particular queue is incremented and if tx pending count has reached upper water-mark, this queue is stopped instead of stopping all queues. Similarly when a packet is successfully transmitted from device, tx pending count is decremented per queue and if pending count falls below lower water-mark, queue operations are again resumed. This ensures that not all tranmission is blocked if traffic with particular TOS value suddenly increases. Also wake all queues after association/IBSS_join/uAP_BSS_start to enable traffic on all queues. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 10月, 2012 5 次提交
-
-
由 Johannes Berg 提交于
The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Amitkumar Karwar 提交于
This reverts commit 34202e28 We made "34202ee.." because we didn't support custom regulatory rules at that time. But now we use our own custom regulatory rules, so it needs to be changed back. Also, chan->max_power calculations in cfg80211 were broken. Hence we started using chan->max_reg_power. Now it has got fixed in following commit. commit 5e31fc08 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Tue Jul 24 08:35:39 2012 +0200 wireless: reg: restore previous behaviour of chan->max_power calculations Hence we will use chan->max_power instead of chan->max_reg_power. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
mwifiex_request_scan() takes care of synchronous internal scan performed by driver during association. Currently the semaphore acquired for the scan is unnecessarily released at the end of different paths. Also, failure paths returning error code other than "-1" are not considered. We will release it at the end of routine to fix above issues. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
When the interface is down, we will abort scan by calling cfg80211_scan_done() with abort option. This fixes WARN_ON triggered by cfg80211 in wdev_cleanup_work(). Driver's internal variables/flags are cleared once we get response for current scan command. Meanwhile we will block new scan request from cfg80211. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
We will delay/abort scan operation based on traffic for low priority scan. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 10月, 2012 1 次提交
-
-
由 Bing Zhao 提交于
De-reference and deallocate scan state on failure. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NPaul Stewart <pstew@chromium.org> Tested-by: NPaul Stewart <pstew@chromium.org> Reviewed-by: NRyan Cairns <rtc@chromium.org> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 10月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
The next patch will introduce a flag that is set by default in cfg80211 so drivers and mac80211 need to use |= to set features they have so that they don't clear the already-set feature. We could set the flag in wiphy_register() instead of wiphy_new() to avoid this patch, but then the drivers couldn't *unset* flags they don't want to use even though the implementation is generic. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 09 10月, 2012 2 次提交
-
-
由 Amitkumar Karwar 提交于
This patch adds support to send correct reason code got from firmware when association attempt fails. Also, the error message displayed for association failure due to network incompatibility is modified. Current message "cannot find ssid.." misleads user. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
There are cases we cannot scan when request is received. For example, during WPA group key negociation the scan request will be blocked. We should return an error code to cfg80211 because cfg80211_scan_done will never be called. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 9月, 2012 10 次提交
-
-
由 Kevin Gan 提交于
The firmware has support for this feature, so we offload it to firmware. In start_ap, driver passes the inactivity timeout value to firmware via TLVs and firmware will report STA_DEAUTH event to driver when inactivity timer is fired. Signed-off-by: NKevin Gan <ganhy@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Due to firmware design, driver needs to add a default P2P interface to implement find phase and action frame handshake. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
When scan is triggered from cfg80211, the request contains some IEs and we should parse all the IEs and append each IE into a seperate IE buffer. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Add a new command to implement mgmt_frame_register. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Advertise supported management frame types to cfg80211. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Implement mgmt_tx in cfg80211 ops through data path. Advertise probe resp offload and skip to send probe resp in AP or GO mode. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stone Piao 提交于
Remove unnecessary blank lines and extra tab. Signed-off-by: NStone Piao <piaoyun@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 9月, 2012 1 次提交
-
-
由 Amitkumar Karwar 提交于
Currently scan operation is delayed/aborted based on Tx traffic consistency. This decision is taken after receiving scan response of first scan command from FW. But when heavy traffic is running, we can not even afford to send first scan command and go off channel for 30msec. We will block scan request in this case. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 19 9月, 2012 1 次提交
-
-
由 Johannes Berg 提交于
The name can't be modified by the driver, make it const. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 12 9月, 2012 4 次提交
-
-
由 Amitkumar Karwar 提交于
country 00 (world regulatory domain) doesn't define channels 52 - 64 and 100 - 140. Add these channels to our custom world regulatory domain. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
We will use world regulatory domain (country 00) as default when driver is loaded. Later after a successful association cfg80211 will change the regulatory domain to a specific country if the AP has advertised country IE. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
AP's country ie is parsed and 11d information is updated in firmware while associating. Previous mwifiex_send_domain_info_cmd_fw() call in association path is not necessary now. Hence it is removed in this patch. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Currently AP interface has higher priority over station. Hence separate entries are created in "adapter->bss_prio_tbl" for these interfaces and station packet is dequeued only if there is not packet in queue for AP. It is observed that ping for station interface doesn't work if heavy traffic is running on AP. The problem is fixed by having same priority for both the interfaces. This patch also removes an extra initialisation for "priv->bss_priority". Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 9月, 2012 1 次提交
-
-
由 Avinash Patil 提交于
This patch adds support for parsing rates from cfg80211_ap_settings of start_ap handler. This in turn adds support for 11a and 11b phy configurations. Signed-off-by: NAvinash Patil <patila@marvell.com> Signed-off-by: NKiran Divekar <dkiran@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-