Allow the user to mount an NFSv4.0 or NFSv4.1 partition using a
standard syntax of '-overs=4.0', or '-overs=4.1' rather than the
more cumbersome '-overs=4,minorversion=1'.

See also the earlier patch by Dros Adamson, which added the
Linux-specific syntax '-ov4.0', '-ov4.1'.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Shows the implementation ids in /proc/self/mountstats.  This doesn't break
the nfs-utils mountstats tool.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

server_scope would never be freed if nfs4_check_cl_exchange_flags() returned
non-zero
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Send the nfs implementation id in EXCHANGE_ID requests unless the module
parameter nfs.send_implementation_id is 0.

This adds a CONFIG variable for the nii_domain that defaults to "kernel.org".
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch removes the old hashmap-based caching and instead uses a
"request key actor" to place an upcall to the legacy idmapper rather
than going through /sbin/request-key.  This will only be used as a
fallback if /etc/request-key.conf isn't configured to use nfsidmap.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The keyctl_set_timeout function isn't exported to other parts of the
kernel, but I want to use it for the NFS idmapper.  I already have the
key, but I wanted a generic way to set the timeout.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The NFS4CLNT_LAYOUTRECALL bit is a long-term impediment to scalability. It
basically stops all other recalls by a given server once any layout recall
is requested.

If the recall is for a different file, then we don't care.
If the recall applies to the same file, then we're in one of two situations:
Either we are in the case of a replay of an existing request, in which case
the session is supposed to deal with matters, or we are dealing with a
completely different request, in which case we should just try to process
it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and
pnfs_update_layout are redundant.

In the case of a bulk layout recall, we're always testing for
the NFS_LAYOUT_BULK_RECALL flay anyway.
In the case of a file or segment recall, the call to
pnfs_set_layout_stateid() updates the layout_header 'barrier'
sequence id, which triggers the test in pnfs_layoutgets_blocked()
and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, wait queue, used for polling of RPC pipe changes from user-space,
is a part of RPC pipe. But the pipe data itself can be released on NFS umount
prior to dentry-inode pair, connected to it (is case of this pair is open by
some process).
This is not a problem for almost all pipe users, because all PipeFS file
operations checks pipe reference prior to using it.
Except evenfd. This thing registers itself with "poll" file operation and thus
has a reference to pipe wait queue. This leads to oopses on destroying eventfd
after NFS umount (like rpc_idmapd do) since not pipe data left to the point
already.
The solution is to wait queue from pipe data to internal RPC inode data. This
looks more logical, because this wiat queue used only for user-space processes,
which already holds inode reference.

Note: upcalls have to get pipe->dentry prior to dereferecing wait queue to make
sure, that mount point won't disappear from underneath us.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There are 2 tightly bound objects: pipe data (created for kernel needs, has
reference to dentry, which depends on PipeFS mount/umount) and PipeFS
dentry/inode pair (created on mount for user-space needs). They both
independently may have or have not a valid reference to each other.
This means, that we have to make sure, that pipe->dentry reference is valid on
upcalls, and dentry->pipe reference is valid on downcalls. The latter check is
absent - my fault.
IOW, PipeFS dentry can be opened by some process (rpc.idmapd for example), but
it's pipe data can belong to NFS mount, which was unmounted already and thus
pipe data was destroyed.
To fix this, pipe reference have to be set to NULL on rpc_unlink() and checked
on PipeFS file operations instead of pipe->dentry check.

Note: PipeFS "poll" file operation will be updated in next patch, because it's
logic is more complicated.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.

Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v3:
1) Lookup for client is performed from the beginning of the list on each PipeFS
event handling operation.

Lockdep is sad otherwise, because inode mutex is taken on PipeFS dentry
creation, which can be called on mount notification, where this per-net client
lock is taken on clients list walk.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Otherwise we have no guarantee that the net namespace won't just
disappear from underneath us once the task that created it
is destroyed.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Currently, the nfs_parsed_mount_data->net field is initialised in
the nfs_parse_mount_options() function, which means that it only
gets set if we're using text based mounts. The legacy binary
mount interface is therefore broken.

Fix is to initialise the ->net field in nfs_alloc_parsed_mount_data.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Include RPC statistics from all data servers in /proc/self/mountstats for pNFS
filelayout mounts.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: Fix a debugging message which had an obsolete function name
in it (nfs_follow_mountpoint).

Introduced by commit 36d43a43 "NFS: Use d_automount() rather than
abusing follow_link()" (January 14, 2011)
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Our dprintk() debugging facility doesn't specify any verbosity level
for it's printk() calls, but it should.

The default verbosity for printk's is KERN_DEFAULT.  You might argue
that these are debugging printk's and thus the verbosity should be
KERN_DEBUG.  That would mean that to see NFS and SUNRPC debugging
output an admin would also have to boost the syslog verbosity, which
would be insufferably noisy.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

With static RPC slots, the xprt backlog queue stats were useful in showing
when the transport (TCP) was starved by lack of RPC slots. The new dynamic
RPC slot code, commit d9ba131d, always
provides an RPC slot and so only uses the xprt backlog queue when the
tcp_max_slot_table_entries value has been hit or when an allocation error
occurs. All requests are now placed on the xprt sending or pending queue which
need to be monitored for debugging.

The max_slot stat shows the maximum number of dynamic RPC slots reached which is
useful when debugging performance issues.

Add the new fields at the end of the mountstats xprt stanza so that mountstats
outputs the previous correct values and ignores the new fields. Bump
NFS_IOSTATS_VERS.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ca_maxoperations:

      For the backchannel, the server MUST
      NOT change the value the client offers.  For the fore channel,
      the server MAY change the requested value.

  ca_maxrequests:

       For the backchannel, the server MUST NOT change the
       value the client offers.  For the fore channel, the server MAY
       change the requested value.
Signed-off-by: NVitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't allow invalid 'vers' and 'minorversion' combinations in mount options,
such as "vers=3,minorversion=1".
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The tracepoint code relies on the queue->name being defined in order to
be able to display the name of the waitqueue on which an RPC task is
sleeping.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>

Don't allocate the legacy idmapper tables until we actually need
them.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Add the appropriate 'select KEYS' to the NFSv4 Kconfig entry.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of pre-allocating the storage for all the strings, we can
significantly reduce the size of that table by doing the allocation
when we do the downcall.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It's not compilable in case of CONFIG_NFS_V4_1 is not set.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we initialise the nfs_net->nfs_client_lock spinlock.
Also ensure that nfs_server_remove_lists() doesn't try to
dereference server->nfs_client before that is initialised.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>

Lockd now managed in network namespace context. And this patch introduces
network namespace related NLM hosts shutdown in case of releasing per-net Lockd
resources.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NLM host is network namespace aware now.
So NSM have to take it into account.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This object depends on RPC client, and thus on network namespace.
So let's make it's allocation and lookup in network namespace context.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch introduces per-net Lockd initialization and destruction routines.
The logic is the same as in global Lockd up and down routines. Probably the
solution is not the best one. But at least it looks clear.
So per-net "up" routine are called only in case of lockd is running already. If
per-net resources are not allocated yet, then service is being registered with
local portmapper and lockd sockets created.
Per-net "down" routine is called on every lockd_down() call in case of global
users counter is not zero.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Lockd is going to be shared between network namespaces - i.e. going to be able
to handle lock requests from different network namespaces. This means, that
network namespace related resources have to be allocated not once (like now),
but for every network namespace context, from which service is requested to
operate.
This patch implements Lockd per-net users accounting. New per-net counter is
used to determine, when per-net resources have to be freed.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch parametrizes Lockd permanent sockets creation routine by network
namespace context.
It also replaces hard-coded init_net with current network namespace context in
Lockd sockets creation routines.
This approach looks safe, because Lockd is created during NFS mount (or NFS
server start) and thus socket is required exactly in current network namespace
context. But in the same time it means, that Lockd sockets inherits first Lockd
requester network namespace. This issue will be fixed in further patches of the
series.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function is enough for releasing resources, allocated for network
namespace context, in case of sharing service between them.
IOW, each service "user" (LockD, NFSd, etc), which wants to share service
between network namespaces, have to release related resources by the function,
introduced in this patch, instead of performing service shutdown (of course in
case the service is shared already to the moment of release).
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

v2: Added comment to BUG_ON's in svc_destroy() to make code looks clearer.

This patch introduces network namespace filter for service destruction
function.
Nothing special here - just do exactly the same operations, but only for
tranports in passed networks namespace context.
BTW, BUG_ON() checks for empty service transports lists were returned into
svc_destroy() function. This is because of swithing generic svc_close_all() to
networks namespace dependable svc_close_net().
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch moves service transports deletion from service sockets lists to
separated function.
This is a precursor patch, which would be usefull with service shutdown in
network namespace context, introduced later in the series.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch moves removing of service transport from it's pools ready lists to
separated function. Also this clear is now done with list_for_each_entry_safe()
helper.
This is a precursor patch, which would be usefull with service shutdown in
network namespace context, introduced later in the series.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>