Merge tag 'samsung-dt-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DeviceTree update for v4.10:
1. Add TOPEET itop core and Elite boards, based on Exynos4412.
2. Remove the Exynos4415 DTSI. We did not have any mainlined boards
   using it. I am also not aware of any popular out-of-tree boards using it.
3. Add Snoop Control Unit node for Exynos4.
4. Minor cleanups.

* tag 'samsung-dt-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Add SCU device node to exynos4.dtsi
  ARM: dts: exynos: Remove exynos4415.dtsi
  ARM: dts: exynos: Document eMMC/SD/SDIO devices in Snow and Peach boards
  ARM: dts: exynos: Add TOPEET itop elite based board
  ARM: dts: exynos: Add TOPEET itop core board SCP package version
  ARM: dts: exynos: Add entries for sound support on Odroid-XU board
  ARM: dts: exynos: Remove "simple-bus" compatible from fimc-is node
Signed-off-by: NOlof Johansson <olof@lixom.net>

NXP LPC32xx ARM SoC device tree updates for v4.10

This includes a single functional change:
* set default parent clock for PWM1 & PWM2.

* tag 'lpc32xx-dt-v4.10' of https://github.com/sylemieux/linux-lpc32xx:
  ARM: dts: lpc32xx: set default parent clock for pwm1 & pwm2
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.10

- Add OPP tables to support generic cpufreq driver
- Use more clocks/resets properties
- Misc fixes and cleanups

* tag 'uniphier-dt-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: make compatible of syscon nodes SoC-specific
  ARM: dts: uniphier: add clocks/resets to EHCI nodes of sLD3 SoC
  ARM: dts: uniphier: remove redundant serial fifo-size properties
  ARM: dts: uniphier: make 32bit SoC DTSI linear
  ARM: dts: uniphier: add CPU clocks and OPP table for PXs2 SoC
  ARM: dts: uniphier: add CPU clocks and OPP table for Pro5 SoC
  ARM: dts: uniphier: increase register region size of sysctrl node
Signed-off-by: NOlof Johansson <olof@lixom.net>

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...

Merge tag 'stm32-dt-for-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.10, round 1.

Highlights:
----------
 - Add LSI and LSE clocks support for STM32F429
 - Add GPIO IRQ support for STM32F429
 - Declare push button as GPIO keys on STM32F429 boards
 - Add DMA supports on USART1 & USART3 on STM32F429
 - Add Ethernet fixes

* tag 'stm32-dt-for-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32f429: add LSI and LSE clocks
  ARM: dts: stm32f429: remove Ethernet wake on Lan support
  ARM: dts: stm32f429: Fix Ethernet node on Eval Board
  ARM: dts: stm32f429: Align Ethernet node with new bindings properties
  ARM: DT: stm32: move dma translation to board files
  ARM: DT: STM32: add dma for usart3 on F429
  ARM: DT: STM32: add dma for usart1 on F429
  ARM: dts: Declare push button as GPIO key on stm32f429 boards
  ARM: dts: Add GPIO irq support to STM32F429
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.10

Clean-Ups and Corrections:
* Removed Z clock from r8a7794 SoC; it is not present in hardware
* Use generic pinctrl properties in SDHI nodes in gose board
* Correct W=1 dtc warnings on r8a7794 SoC
* Correct DU reg property on r8a7779 SoC
* Correct SCIFB reg properties to cover all registers

Enhancements:
* Configure pinmuxing for the DU0 input clock on the Marzen board
* Enable VIN 0 - 2 on r8a7793 SoC
* Enable HDMI input on Koelsch and Lager boards
* Enable SDHI1 on rskrza1 board
* Add MMCIF nodes to r7s72100 SoC
* Add MSIOF clocks to r8a7792 SoC
* Enable UHS for SDHI 0 & 1 on koelsch and alt boards

* tag 'renesas-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: dts: r8a7794: remove Z clock
  ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clock
  ARM: dts: sh73a0: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7740: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7779: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7778: Remove skeleton.dtsi inclusion
  ARM: dts: emev2: Remove skeleton.dtsi inclusion
  ARM: dts: r8a7779: Fix DU reg property
  ARM: dts: r8a7793: Enable VIN0-VIN2
  ARM: dts: koelsch: add HDMI input
  ARM: dts: lager: Add entries for VIN HDMI input support
  ARM: dts: rskrza1: add sdhi1 DT support
  ARM: dts: r7s72100: add sdhi to device tree
  ARM: dts: r8a7794: Fix W=1 dtc warnings
  ARM: dts: gose: use generic pinctrl properties in SDHI nodes
  ARM: dts: r7s72100: add sdhi clock to device tree
  ARM: dts: r7s72100: add mmcif to device tree
  ARM: dts: r8a7792: add MSIOF support
  ARM: dts: r8a7792: add MSIOF clocks
  ARM: dts: wheat: add DU support
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.10/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

DaVinci device-tree source additions for
LCD, SPI and cfgchip syscon.

* tag 'davinci-for-v4.10/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: Add cfgchip syscon node
  ARM: dts: da850: Add DMA to SPI0
  ARM: dts: da850: add a node for the LCD controller
Signed-off-by: NOlof Johansson <olof@lixom.net>

Exynos4 like other Cortex-A9 SoC's has a Snoop Control Unit(SCU)
and its SFR are used during SMP boot and S2R. Add SCU node to the device tree.
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

These hardware blocks are SoC-specific, so their compatible strings
should be SoC-specific as well.  This change has no impact on the
actual behavior since it is controlled by the generic "simple-mfd",
"syscon" compatible strings.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Now, the clock/reset controller driver is available for this SoC.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

These are the default of the optional property.  No need to describe
them explicitly.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

I notice some mistakes in the SoC DTSI; wrong interrupts properties
of timer nodes, mismatch between the node name and the compatible
for sdctrl block.  Given those problems fixed, the common parts
among SoCs are less than I had first expected.  The more and more
property overrides are making the SoC DTSI unreadable.

Stretch out the SoC DTSI files and fix the following:

 - Fix the 3rd cell of the interrupts property of the timer nodes
   for Pro4, Pro5, PXs2

 - Fix the node name mioctrl to sdctrl for Pro5, PXs2

 - Fix the second region of l2 node for PXs2
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add a CPU clock to every CPU node and a CPU OPP table to use the
generic cpufreq driver.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

Add a CPU clock to every CPU node and a CPU OPP table to use the
generic cpufreq driver.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

The System Control node has 0x10000 byte of registers.  The current
reg size must be expanded to use the cpufreq driver because the
registers controlling CPU frequency are located at offset 0x8000.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

This patch adds lsi / lse oscillators. These clocks can be use by
RTC clocks.
The clock drivers needs to disable the power domain write protection using
syscon / regmap to enable these clocks.
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

This patch removes WoL (Wake on Lan) support as it is not yet
fully supported and tested.
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

"phy-handle" entry is mandatory when mdio subnode is used in
Ethernet node.
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

This patch aligns clocks names and node reference according to new
stm32-dwmac glue binding. It also renames Ethernet pinctrl phandle
(indeed there is no need to add 0 as Ethernet instance as there is only
one IP in SOC).
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

stm32f469-disco and stm32f429-eval boards use SDRAM start address remapping
(to @0) to boost performances. A DMA translation through "dma-ranges"
property was needed for other masters than the M4 CPU.
stm32f429-disco doesn't use remapping so doesn't need this DMA translation.
This patches moves this DMA translation definition from stm32f429 soc file
to board files.
Tested-by: NBruno Herrera <bruherrera@gmail.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

Add DMA support for USART3 on STM32F429 MCU.
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

Tested-by: NBruno Herrera <bruherrera@gmail.com>
Signed-off-by: NGerald Baeza <gerald.baeza@st.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>

R8A7794 doesn't have Cortex-A15 CPUs, thus there's no Z clock...

Fixes: 0dce5454 ("ARM: shmobile: Initial r8a7794 SoC device tree")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

DU0 uses an externally provided clock, but the corresponding pin isn't
correctly muxed. Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As of commit 9c0da3cc ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

    Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As of commit 9c0da3cc ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

    Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As of commit 9c0da3cc ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

    Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As of commit 9c0da3cc ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

    Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

As of commit 9c0da3cc ("ARM: dts: explicitly mark skeleton.dtsi
as deprecated"), including skeleton.dtsi is deprecated.

This fixes the following warning with W=1:

    Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The system uses one address cell and one size cell, not two. Fix the DU
DT node.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add DT entries for vin0, vin0_pins, and adv7612.

Sets the 'default-input' property for ADV7612, enabling image and video
capture without the need to have userspace specifying routing.
Signed-off-by: NWilliam Towle <william.towle@codethink.co.uk>
Signed-off-by: NRob Taylor <rob.taylor@codethink.co.uk>
[uli: added interrupt, renamed endpoint, merged default-input]
Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Since 16ccaf5b ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NChris Brandt <chris.brandt@renesas.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>