* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] CIFS_DEBUG2 depends on CIFS

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Change SDHCI version error to a warning
  [MMC] Fix incorrect register access

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250: sysrq deadlock fix
  [SERIAL] 8250: add tsi108 serial support
  [SERIAL] IP22: fix serial console hangs
  [SERIAL] dz: Fix compilation error

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] arch/arm/kernel/bios32.c: no need to set isa_bridge
  [ARM] 3729/3: EABI padding rules necessitate the packed attribute of floatx80
  [ARM] 3725/1: sharpsl_pm: warn about wrong temperature
  [ARM] 3723/1: collie charging
  [ARM] 3728/1: Restore missing CPU Hotplug irq helper
  [ARM] 3727/1: fix ucb initialization on collie
  [ARM] Allow Versatile to be built for AB and PB
  [ARM] 3726/1: update {ep93xx,ixp2000,ixp23xx,lpd270,onearm} defconfigs to 2.6.18-rc1
  [ARM] 3721/1: Small cleanup for locomo.c

Chandra Seetharaman reported SLAB crashes caused by the slab.c lock
annotation patch.  There is only one chunk of that patch that has a
material effect on the slab logic - this patch undoes that chunk.

This was confirmed to fix the slab problem by Chandra.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a result of 894673ee, the ARM
architecture is more or less unbuildable - only one defconfig appears
to build, with all others erroring out with:

	  CC      arch/arm/kernel/setup.o
	In file included from /home/rmk/git/linux-2.6-rmk/arch/arm/kernel/setup.c:22:
	/home/rmk/git/linux-2.6-rmk/include/linux/root_dev.h:7: warning: implicit declaration of function `MKDEV'
	...

Essentially, root_dev.h uses MKDEV and dev_t, but does not include any
headers which provide either of these definitions.  The reason it worked
previously is that linux/tty.h just happened to include the required
headers for linux/root_dev.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mm/slab.c uses nested locking when dealing with 'off-slab'
caches, in that case it allocates the slab header from the
(on-slab) kmalloc caches. Teach the lock validator about
this by putting all on-slab caches into a separate class.

this patch has no effect on non-lockdep kernels.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

undo existing mm/slab.c lock-validator annotations, in preparation
of a new, less intrusive annotation patch.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

O2 Micro's controllers have a larger specification version value and are
therefore denied by the driver. When bypassing this check they seem to work
fine. This patch makes the code a bit more forgiving by changing the error
to a warning.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There was a writel() being used on a 16-bit register.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since this assignment was the only place on !alpha where isa_bridge was
touched, it didn't have any effect.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* HEAD:
  [SPARC]: Fix OF register translations under sub-PCI busses.
  [SPARC64]: Refine Sabre wsync logic.
  [SERIAL] sunsu: Handle keyboard and mouse ports directly.
  [SPARC64]: Fix 2 bugs in sabre_irq_build()
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix make headers_install
  [SPARC64]: of_device_register() error checking fix

Keep the result holder variable the same type as the quantity we are
retreiving in the get_user() macro - don't go through a pointer version
of the user space address type.

Using the address type causes problems if the address type was const
(newer versions of gcc quite rightly error out for that condition).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/asm-i386/system.h has trailing semicolons in some of the
macros that cause legitimate code to fail compilation, so remove
them. Also remove extra blank lines within one group of macros.

And put stts() and clts() back together; they got separated somehow.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Koen Kooi

EABI padding rules necessitate the packed attribute of floatx80,
otherwise nwfpe complains about invalid structure sizes.
Signed-off-by: NKoen Kooi <koen@dominion.kabel.utwente.nl>
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There is an implicit assumption in the code that ranges will translate
to something that can fit in 2 32-bit cells, or a 64-bit value.  For
certain kinds of things below PCI this isn't necessarily true.

Here is what the relevant OF device hierarchy looks like for one of
the serial controllers on an Ultra5:

    Node 0xf005f1e0
        ranges:      00000000.00000000.00000000.000001fe.01000000.00000000.01000000
                     01000000.00000000.00000000.000001fe.02000000.00000000.01000000
                     02000000.00000000.00000000.000001ff.00000000.00000001.00000000
                     03000000.00000000.00000000.000001ff.00000000.00000001.00000000
        device_type:  'pci'
        model:  'SUNW,sabre'

        Node 0xf005f9d4
            device_type:  'pci'
            model:  'SUNW,simba'

           Node 0xf0060d24
                ranges:  00000010.00000000 82010810.00000000.f0000000 01000000
			 00000014.00000000 82010814.00000000.f1000000 00800000
                name:  'ebus'

                Node 0xf0062dac
                    reg:  00000014.003083f8.00000008 --> 0x1ff.f13083f8
                    device_type:  'serial'
                    name:  'su'

So the correct translation here is:

1) Match "su" register to second ranges entry of 'ebus', which translates
   into a PCI triplet "82010814.00000000.f1000000" of size 00800000, which
   gives us "82010814.00000000.f13083f8".

2) Pass-through "SUNW,simba" since it lacks ranges property

3) Match "82010814.00000000.f13083f8" to third ranges property of PCI
   controller node 'SUNW,sabre', and we arrive at the final physical
   MMIO address of "0x1fff13083f8".

Due to the 2-cell assumption, we couldn't translate to a PCI 3-cell
value, and we couldn't perform a pass-thru on it either.

It was easiest to just stop splitting the ranges application operation
between two methods, ->map and ->translate, and just let ->map do all
the work.  That way it would work purely on 32-bit cell arrays instead
of having to "return" some value like a u64.

It's still not %100 correct because the out-of-range check is still
done using the 64 least significant bits of the range and address.
But it does work for all the cases I've thrown at it so far.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is only needed when there is a PCI-PCI bridge sitting
between the device and the PCI host controller which is
not a Simba APB bridge.

Add logic to handle two special cases:

1) device behind EBUS, which sits on PCI
2) PCI controller interrupts
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sunsu_ports[] array exists merely to be able to easily
use an integer index to get at the proper serial console
port struct.

We size this only for real ports, not for the keyboard and
mouse, and thus keyboard and mouse port registration would
fail.

Fix this by dynamically allocating the port struct for the
keyboard and mouse, instead of using the sunsu_ports[]
array.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When installing the IRQ pre-handler, we were not setting up the second
argument correctly.  It should be a pointer to the sabre_irq_data, not
the config space PIO address.

Furthermore, we only need this pre-handler installed if the device
sits behind a PCI bridge that is not Sabre or Simba/APB.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A minor typo in the include/asm-sparc64/Kbuild file prevents the make
headers_install from building a useful tree of kernel headers for
sparc64.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NTom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

device_create_file() can fail.  This causes the sparc64 compile to
fail when my fanatical __must_check patch is applied, due to -Werror.

[ Added necessary identical fix for sparc32. -DaveM]
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* HEAD:
  [NET]: fix __sk_stream_mem_reclaim
  [Bluetooth] Fix deadlock in the L2CAP layer
  [Bluetooth] Let BT_HIDP depend on INPUT
  [Bluetooth] Avoid NULL pointer dereference with tty->driver
  [Bluetooth] Remaining transitions to use kzalloc()
  [WAN]: converting generic HDLC to use netif_dormant*()
  [IPV4]: Fix error handling for fib_insert_node call
  [NETROM] lockdep: fix false positive
  [ROSE] lockdep: fix false positive
  [AX.25]: Optimize AX.25 socket list lock
  [IPCOMP]: Fix truesize after decompression
  [IPV6]: Use ipv6_addr_src_scope for link address sorting.
  [TCP] tcp_highspeed: Fix AI updates.
  [MAINTAINERS]: Add proper entry for TC classifier
  [NETROM]: Drop lock before calling nr_destroy_socket
  [NETROM]: Fix locking order when establishing a NETROM circuit.
  [AX.25]: Fix locking of ax25 protocol function list.
  [IPV6]: order addresses by scope

* HEAD:
  [PATCH] hwmon: Documentation update for abituguru
  [PATCH] hwmon: Fix for first generation Abit uGuru chips
  [PATCH] hwmon: New maintainer for w83791d
  [PATCH] pca9539: Honor the force parameter
  [PATCH] i2c-algo-bit: Wipe out dead code
  [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers
  [PATCH] i2c: New mailing list
  [PATCH] i2c-ite: Plan for removal
  [PATCH] i2c-powermac: Fix master_xfer return value
  [PATCH] scx200_acb: Fix the block transactions
  [PATCH] scx200_acb: Fix the state machine
  [PATCH] i2c-iop3xx: Avoid addressing self
  [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core

* HEAD:
  [PATCH] The scheduled unexport of insert_resource
  [PATCH] remove kernel/power/pm.c:pm_unregister_all()
  [PATCH] Driver core: bus.c cleanups
  [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections
  [PATCH] Driver core: fix driver-core kernel-doc

* HEAD:
  [PATCH] PCI: PCIE power management quirk
  [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h
  [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume
  [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()

* HEAD: (44 commits)
  [PATCH] USB: move usb-serial.h to include/linux/usb/
  [PATCH] USB: Anydata: Fixes wrong URB callback.
  [PATCH] USB: gadget section fixups
  [PATCH] USB: another unusual device
  [PATCH] USB: Add one VID/PID to ftdi_sio
  [PATCH] USB: unusual_devs entry for Sony DSC-H5
  [PATCH] USB: unusual_devs entry for Nokia E61
  [PATCH] USB: unusual_devs entry for Nokia N91
  [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver
  [PATCH] USB: Option driver: new product ID
  [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter
  [PATCH] USB: ipw.c driver fix
  [PATCH] USB: remove devfs information from Kconfig
  [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c
  [PATCH] USB: ipaq.c timing parameters
  [PATCH] USB: ipaq.c bugfixes
  [PATCH] USB: ehci: fix bogus alteration of a local variable
  [PATCH] USB: add driver for non-composite Sierra Wireless devices
  [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd
  [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci
  ...

* HEAD:
  [PATCH] w1: remove drivers/w1/w1.h
  [PATCH] w1: fix idle check loop in ds2482
  [PATCH] W1: remove w1 mail list from lm_sensors.

Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available"

This reverts commit 5040cb8b.

It breaks previously working ide-cs PIO configurations, causing problems
like

	ide2: I/O resource 0xF883200E-0xF883200E not free.
	ide2: ports already in use, skipping probe

rather than a working kernel.

Cc: Thomas Kleffel <tk@maintech.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This effectively reverts commit b8d35192
by reverts acpi_os_queue_for_execution() to what it was before that,
except it changes the name to acpi_os_execute() to match ACPICA
20060512.
Signed-off-by: NLen Brown <len.brown@intel.com>

[ The thread execution doesn't actually solve the bug it set out to
  solve (see

	http://bugzilla.kernel.org/show_bug.cgi?id=5534

  for more details) because the new events can get caught behind the AML
  semaphore or other serialization.  And when that happens, the notify
  threads keep on piling up until the system dies. ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim.

As such the check on sk->sk_forward_alloc is not needed and can be
removed.
Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] sky2: optimize receive restart
  [PATCH] sky2: PHY power on delays
  [PATCH] sky2: NAPI suspend/resume of dual port cards
  [PATCH] sky2: sky2_reset section mismatch
  [PATCH] sk98lin: fix truncated collision threshold mask
  [PATCH] skge: fix truncated collision threshold mask
  [PATCH] sky2: fix truncated collision threshold mask
  [PATCH] myri10ge return value fix
  [PATCH] Update smc91x driver with ARM Versatile board info
  [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count
  [PATCH] smsc-ircc2: fix section reference mismatches
  [PATCH] 8139cp.c printk fix
  [PATCH] s2io driver irq fix
  [PATCH] e1000: irq naming update
  [PATCH] forcedeth: watermark fixup
  [PATCH] forcedeth: deferral fixup
  [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context
  [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise

Implement the scheduled unexport of insert_resource.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the deprecated and no longer used pm_unregister_all().
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch contains the following cleanups:
- make the needlessly global bus_subsys static
- #if 0 the unused find_bus()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Corrects the kerneldocs for device_create() and device_destroy()
with an eye on coding style, grammar and readability.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'class'
Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'devt'
Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:626): No description found for parameter 'devt'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When changing power states from D0->DX and then from DX->D0, some
Intel PCIE chipsets will cause a device reset to occur.  This will
cause problems for any D State other than D3, since any state
information that the driver will expect to be present coming from
a D1 or D2 state will have been cleared.  This patch addes a
flag to the pci_dev structure to indicate that devices should
not use states D1 or D2, and will set that flag for the affected
chipsets.  This patch also modifies pci_set_power_state() so that
when a device driver tries to set the power state on
a device that is downstream from an affected chipset, or on one
of the affected devices it only allows state changes to or
from D0 & D3.  In addition, this patch allows the delay time
between D3->D0 to be changed via a quirk.  These chipsets also
need additional time to change states beyond the normal 10ms.
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add new defines of PCI-Express AER registers and their bits into file
include/linux/pci_regs.h.
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some VIA southbridges contain a flag in the ACPI register space that
indicates whether an abnormal poweroff has occured, presumably with the
intention that it can be cleared on clean shutdown.  Some BIOSes check this
flag at resume time, and will re-POST the system rather than jump back to
the OS if it's set.  Clearing it at boot time appears to be sufficient.
I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm
not sure where would be cleaner.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg KH <greg@kroah.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Yu, Luming" <luming.yu@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>