When the local group is not allowed we do not modify this_*_load from
their initial value of 0. That means that the load checks at the end
of find_idlest_group cause us to incorrectly return NULL. Fixing the
initial values to ULONG_MAX means we will instead return the idlest
remote group in that case.
Signed-off-by: NBrendan Jackman <brendan.jackman@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NVincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-4-brendan.jackman@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since commit:

  83a0a96a ("sched/fair: Leverage the idle state info when choosing the "idlest" cpu")

find_idlest_group_cpu() (formerly find_idlest_cpu) no longer returns -1,
so we can simplify the checking of the return value in find_idlest_cpu().
Signed-off-by: NBrendan Jackman <brendan.jackman@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NVincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-3-brendan.jackman@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In preparation for changes that would otherwise require adding a new
level of indentation to the while(sd) loop, create a new function
find_idlest_cpu() which contains this loop, and rename the existing
find_idlest_cpu() to find_idlest_group_cpu().

Code inside the while(sd) loop is unchanged. @new_cpu is added as a
variable in the new function, with the same initial value as the
@new_cpu in select_task_rq_fair().
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NBrendan Jackman <brendan.jackman@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NVincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-2-brendan.jackman@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The "goto force_balance" here is intended to mitigate the fact that
avg_load calculations can result in bad placement decisions when
priority is asymmetrical.

The original commit that adds it:

  fab47622 ("sched: Force balancing on newidle balance if local group has capacity")

explains:

    Under certain situations, such as a niced down task (i.e. nice =
    -15) in the presence of nr_cpus NICE0 tasks, the niced task lands
    on a sched group and kicks away other tasks because of its large
    weight. This leads to sub-optimal utilization of the
    machine. Even though the sched group has capacity, it does not
    pull tasks because sds.this_load >> sds.max_load, and f_b_g()
    returns NULL.

A similar but inverted issue also affects ARM big.LITTLE (asymmetrical CPU
capacity) systems - consider 8 always-running, same-priority tasks on a
system with 4 "big" and 4 "little" CPUs. Suppose that 5 of them end up on
the "big" CPUs (which will be represented by one sched_group in the DIE
sched_domain) and 3 on the "little" (the other sched_group in DIE), leaving
one CPU unused. Because the "big" group has a higher group_capacity its
avg_load may not present an imbalance that would cause migrating a
task to the idle "little".

The force_balance case here solves the problem but currently only for
CPU_NEWLY_IDLE balances, which in theory might never happen on the
unused CPU. Including CPU_IDLE in the force_balance case means
there's an upper bound on the time before we can attempt to solve the
underutilization: after DIE's sd->balance_interval has passed the
next nohz balance kick will help us out.
Signed-off-by: NBrendan Jackman <brendan.jackman@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170807163900.25180-1-brendan.jackman@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We use task_util() in find_idlest_group() via capacity_spare_wake().
This task_util() updated in wake_cap(). However wake_cap() is not the
only reason for ending up in find_idlest_group() - we could have been sent
there by wake_wide(). So explicitly sync the task util with prev_cpu
when we are about to head to find_idlest_group().

We could simply do this at the beginning of
select_task_rq_fair() (i.e. irrespective of whether we're heading to
select_idle_sibling() or find_idlest_group() & co), but I didn't want to
slow down the select_idle_sibling() path more than necessary.

Don't do this during fork balancing, we won't need the task_util and
we'd just clobber the last_update_time, which is supposed to be 0.
Signed-off-by: NBrendan Jackman <brendan.jackman@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andres Oportus <andresoportus@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20170808095519.10077-1-brendan.jackman@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

As a first step this patch makes cfs_tasks list as MRU one.
It means, that when a next task is picked to run on physical
CPU it is moved to the front of the list.

Therefore, the cfs_tasks list is more or less sorted (except
woken tasks) starting from recently given CPU time tasks toward
tasks with max wait time in a run-queue, i.e. MRU list.

Second, as part of the load balance operation, this approach
starts detach_tasks()/detach_one_task() from the tail of the
queue instead of the head, giving some advantages:

 - tends to pick a task with highest wait time;

 - tasks located in the tail are less likely cache-hot,
   therefore the can_migrate_task() decision is higher.

hackbench illustrates slightly better performance. For example
doing 1000 samples and 40 groups on i5-3320M CPU, it shows below
figures:

 default: 0.657 avg
 patched: 0.646 avg
Signed-off-by: NUladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913102430.8985-2-urezki@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On AMD Family17h-based (EPYC) system, a logical NUMA node can contain
upto 8 cores (16 threads) with the following topology.

             ----------------------------
         C0  | T0 T1 |    ||    | T0 T1 | C4
             --------|    ||    |--------
         C1  | T0 T1 | L3 || L3 | T0 T1 | C5
             --------|    ||    |--------
         C2  | T0 T1 | #0 || #1 | T0 T1 | C6
             --------|    ||    |--------
         C3  | T0 T1 |    ||    | T0 T1 | C7
             ----------------------------

Here, there are 2 last-level (L3) caches per logical NUMA node.
A socket can contain upto 4 NUMA nodes, and a system can support
upto 2 sockets. With full system configuration, current scheduler
creates 4 sched domains:

  domain0 SMT       (span a core)
  domain1 MC        (span a last-level-cache)
  domain2 NUMA      (span a socket: 4 nodes)
  domain3 NUMA      (span a system: 8 nodes)

Note that there is no domain to represent cpus spaning a logical
NUMA node.  With this hierarchy of sched domains, the scheduler does
not balance properly in the following cases:

Case1:

 When running 8 tasks, a properly balanced system should
 schedule a task per logical NUMA node. This is not the case for
 the current scheduler.

Case2:

 In some cases, threads are scheduled on the same cpu, while other
 cpus are idle. This results in run-to-run inconsistency. For example:

  taskset -c 0-7 sysbench --num-threads=8 --test=cpu \
                          --cpu-max-prime=100000 run

Total execution time ranges from 25.1s to 33.5s depending on threads
placement, where 25.1s is when all 8 threads are balanced properly
on 8 cpus.

Introducing NUMA identity node sched domain, which is based on how
SRAT/SLIT table define a logical NUMA node. This results in the following
hierarchy of sched domains on the same system described above.

  domain0 SMT       (span a core)
  domain1 MC        (span a last-level-cache)
  domain2 NODE      (span a logical NUMA node)
  domain3 NUMA      (span a socket: 4 nodes)
  domain4 NUMA      (span a system: 8 nodes)

This fixes the improper load balancing cases mentioned above.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/1504768805-46716-1-git-send-email-suravee.suthikulpanit@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The normal x86_topology on NHM+ machines degenerates because the MC
and CPU domains are of the same size, therefore MC inherits
SD_PREFER_SIBLING from CPU (which then gets taken out). The result is
that we'll spread tasks across the first NUMA level in order to
maximize cache utilization.

However, for the x86_numa_in_package_topology we loose the CPU domain,
and we'll not have SD_PREFER_SIBLING set anywhere, giving a distinct
difference in behaviour.

Commit:

  8e7fbcbc ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs")

made a fail by not preserving the SD_PREFER_SIBLING for the !power_saving
case on both CPU and MC.

Then commit:

  6956dc56 ("sched/numa: Add SD_PERFER_SIBLING to CPU domain")

adds it back to the CPU but not MC.

Restore that now, such that we get consistent spreading behaviour wrt
L3 and NUMA.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Ask the compiler to use a single bit for storing true / false values,
instead of wasting the size of a whole int value.
Tested with gcc 5.4.0 on x86_64, and the compiler produces the expected
Assembly (similar to the Assembly code generated when explicitly accessing
the bits with bitmasks, "&" and "|").
Signed-off-by: Nluca abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-5-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

__dl_sub() is more meaningful as a name, and is more consistent
with the naming of the dual function (__dl_add()).
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLuca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix a bug introduced in:

  72f9f3fd ("sched/deadline: Remove dl_new from struct sched_dl_entity")

After that commit, when switching to -deadline if the scheduling
deadline of a task is in the past then switched_to_dl() calls
setup_new_entity() to properly initialize the scheduling deadline
and runtime.

The problem is that the task is enqueued _before_ having its parameters
initialized by setup_new_entity(), and this can cause problems.
For example, a task with its out-of-date deadline in the past will
potentially be enqueued as the highest priority one; however, its
adjusted deadline may not be the earliest one.

This patch fixes the problem by initializing the task's parameters before
enqueuing it.
Signed-off-by: Nluca abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: Nluca abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-2-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

Steve requested better names for the new task-state helper functions.

So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().
Requested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

quiet_vmstat() is an expensive function that only makes sense when we
go into NOHZ.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aubrey.li@linux.intel.com
Cc: cl@linux.com
Cc: fweisbec@gmail.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

While load_balance() masks the source CPUs against active_mask, it had
a hole against the destination CPU. Ensure the destination CPU is also
part of the 'domain-mask & active-mask' set.
Reported-by: NLevin, Alexander (Sasha Levin) <alexander.levin@verizon.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 77d1dfda ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The trivial wake_affine_idle() implementation is very good for a
number of workloads, but it comes apart at the moment there are no
idle CPUs left, IOW. the overloaded case.

hackbench:

		NO_WA_WEIGHT		WA_WEIGHT

hackbench-20  : 7.362717561 seconds	6.450509391 seconds

(win)

netperf:

		  NO_WA_WEIGHT		WA_WEIGHT

TCP_SENDFILE-1	: Avg: 54524.6		Avg: 52224.3
TCP_SENDFILE-10	: Avg: 48185.2          Avg: 46504.3
TCP_SENDFILE-20	: Avg: 29031.2          Avg: 28610.3
TCP_SENDFILE-40	: Avg: 9819.72          Avg: 9253.12
TCP_SENDFILE-80	: Avg: 5355.3           Avg: 4687.4

TCP_STREAM-1	: Avg: 41448.3          Avg: 42254
TCP_STREAM-10	: Avg: 24123.2          Avg: 25847.9
TCP_STREAM-20	: Avg: 15834.5          Avg: 18374.4
TCP_STREAM-40	: Avg: 5583.91          Avg: 5599.57
TCP_STREAM-80	: Avg: 2329.66          Avg: 2726.41

TCP_RR-1	: Avg: 80473.5          Avg: 82638.8
TCP_RR-10	: Avg: 72660.5          Avg: 73265.1
TCP_RR-20	: Avg: 52607.1          Avg: 52634.5
TCP_RR-40	: Avg: 57199.2          Avg: 56302.3
TCP_RR-80	: Avg: 25330.3          Avg: 26867.9

UDP_RR-1	: Avg: 108266           Avg: 107844
UDP_RR-10	: Avg: 95480            Avg: 95245.2
UDP_RR-20	: Avg: 68770.8          Avg: 68673.7
UDP_RR-40	: Avg: 76231            Avg: 75419.1
UDP_RR-80	: Avg: 34578.3          Avg: 35639.1

UDP_STREAM-1	: Avg: 64684.3          Avg: 66606
UDP_STREAM-10	: Avg: 52701.2          Avg: 52959.5
UDP_STREAM-20	: Avg: 30376.4          Avg: 29704
UDP_STREAM-40	: Avg: 15685.8          Avg: 15266.5
UDP_STREAM-80	: Avg: 8415.13          Avg: 7388.97

(wins and losses)

sysbench:

		    NO_WA_WEIGHT		WA_WEIGHT

sysbench-mysql-2  :  2135.17 per sec.		 2142.51 per sec.
sysbench-mysql-5  :  4809.68 per sec.            4800.19 per sec.
sysbench-mysql-10 :  9158.59 per sec.            9157.05 per sec.
sysbench-mysql-20 : 14570.70 per sec.           14543.55 per sec.
sysbench-mysql-40 : 22130.56 per sec.           22184.82 per sec.
sysbench-mysql-80 : 20995.56 per sec.           21904.18 per sec.

sysbench-psql-2   :  1679.58 per sec.            1705.06 per sec.
sysbench-psql-5   :  3797.69 per sec.            3879.93 per sec.
sysbench-psql-10  :  7253.22 per sec.            7258.06 per sec.
sysbench-psql-20  : 11166.75 per sec.           11220.00 per sec.
sysbench-psql-40  : 17277.28 per sec.           17359.78 per sec.
sysbench-psql-80  : 17112.44 per sec.           17221.16 per sec.

(increase on the top end)

tbench:

NO_WA_WEIGHT

Throughput 685.211 MB/sec   2 clients   2 procs  max_latency=0.123 ms
Throughput 1596.64 MB/sec   5 clients   5 procs  max_latency=0.119 ms
Throughput 2985.47 MB/sec  10 clients  10 procs  max_latency=0.262 ms
Throughput 4521.15 MB/sec  20 clients  20 procs  max_latency=0.506 ms
Throughput 9438.1  MB/sec  40 clients  40 procs  max_latency=2.052 ms
Throughput 8210.5  MB/sec  80 clients  80 procs  max_latency=8.310 ms

WA_WEIGHT

Throughput 697.292 MB/sec   2 clients   2 procs  max_latency=0.127 ms
Throughput 1596.48 MB/sec   5 clients   5 procs  max_latency=0.080 ms
Throughput 2975.22 MB/sec  10 clients  10 procs  max_latency=0.254 ms
Throughput 4575.14 MB/sec  20 clients  20 procs  max_latency=0.502 ms
Throughput 9468.65 MB/sec  40 clients  40 procs  max_latency=2.069 ms
Throughput 8631.73 MB/sec  80 clients  80 procs  max_latency=8.605 ms

(increase on the top end)
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Eric reported a sysbench regression against commit:

  3fed382b ("sched/numa: Implement NUMA node level wake_affine()")

Similarly, Rik was looking at the NAS-lu.C benchmark, which regressed
against his v3.10 enterprise kernel.

PRE (current tip/master):

 ivb-ep sysbench:

   2: [30 secs]     transactions:                        64110  (2136.94 per sec.)
   5: [30 secs]     transactions:                        143644 (4787.99 per sec.)
  10: [30 secs]     transactions:                        274298 (9142.93 per sec.)
  20: [30 secs]     transactions:                        418683 (13955.45 per sec.)
  40: [30 secs]     transactions:                        320731 (10690.15 per sec.)
  80: [30 secs]     transactions:                        355096 (11834.28 per sec.)

 hsw-ex NAS:

 OMP_PROC_BIND/lu.C.x_threads_144_run_1.log: Time in seconds =                    18.01
 OMP_PROC_BIND/lu.C.x_threads_144_run_2.log: Time in seconds =                    17.89
 OMP_PROC_BIND/lu.C.x_threads_144_run_3.log: Time in seconds =                    17.93
 lu.C.x_threads_144_run_1.log: Time in seconds =                   434.68
 lu.C.x_threads_144_run_2.log: Time in seconds =                   405.36
 lu.C.x_threads_144_run_3.log: Time in seconds =                   433.83

POST (+patch):

 ivb-ep sysbench:

   2: [30 secs]     transactions:                        64494  (2149.75 per sec.)
   5: [30 secs]     transactions:                        145114 (4836.99 per sec.)
  10: [30 secs]     transactions:                        278311 (9276.69 per sec.)
  20: [30 secs]     transactions:                        437169 (14571.60 per sec.)
  40: [30 secs]     transactions:                        669837 (22326.73 per sec.)
  80: [30 secs]     transactions:                        631739 (21055.88 per sec.)

 hsw-ex NAS:

 lu.C.x_threads_144_run_1.log: Time in seconds =                    23.36
 lu.C.x_threads_144_run_2.log: Time in seconds =                    22.96
 lu.C.x_threads_144_run_3.log: Time in seconds =                    22.52

This patch takes out all the shiny wake_affine() stuff and goes back to
utter basics. Between the two CPUs involved with the wakeup (the CPU
doing the wakeup and the CPU we ran on previously) pick the CPU we can
run on _now_.

This restores much of the regressions against the older kernels,
but leaves some ground in the overloaded case. The default-enabled
WA_WEIGHT (which will be introduced in the next patch) is an attempt
to address the overloaded situation.
Reported-by: NEric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jinpuwang@gmail.com
Cc: vcaputo@pengaru.com
Fixes: 3fed382b ("sched/numa: Implement NUMA node level wake_affine()")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge powerpc transactional memory fixes from Michael Ellerman:
 "I figured I'd still send you the commits using a bundle to make sure
  it works in case I need to do it again in future"

This fixes transactional memory state restore for powerpc.

* bundle'd patches from Michael Ellerman:
  powerpc/tm: Fix illegal TM state in signal handler
  powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks

Pull networking fixes from David Miller:

 1) Fix object leak on IPSEC offload failure, from Steffen Klassert.

 2) Fix range checks in ipset address range addition operations, from
    Jozsef Kadlecsik.

 3) Fix pernet ops unregistration order in ipset, from Florian Westphal.

 4) Add missing netlink attribute policy for nl80211 packet pattern
    attrs, from Peng Xu.

 5) Fix PPP device destruction race, from Guillaume Nault.

 6) Write marks get lost when BPF verifier processes R1=R2 register
    assignments, causing incorrect liveness information and less state
    pruning. Fix from Alexei Starovoitov.

 7) Fix blockhole routes so that they are marked dead and therefore not
    cached in sockets, otherwise IPSEC stops working. From Steffen
    Klassert.

 8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
  cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan
  net: thunderx: mark expected switch fall-throughs in nicvf_main()
  udp: fix bcast packet reception
  netlink: do not set cb_running if dump's start() errs
  ipv4: Fix traffic triggered IPsec connections.
  ipv6: Fix traffic triggered IPsec connections.
  ixgbe: incorrect XDP ring accounting in ethtool tx_frame param
  net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
  Revert commit 1a8b6d76 ("net:add one common config...")
  ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register
  ixgbe: Return error when getting PHY address if PHY access is not supported
  netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'
  netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook
  tipc: Unclone message at secondary destination lookup
  tipc: correct initialization of skb list
  gso: fix payload length when gso_size is zero
  mlxsw: spectrum_router: Avoid expensive lookup during route removal
  bpf: fix liveness marking
  doc: Fix typo "8023.ad" in bonding documentation
  ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real
  ...

The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback.
This module allows switching to different USB profiles with the
'AT+UUSBCONF' command, and provides a ECM network interface when the
'AT+UUSBCONF=2' profile is selected.

The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB
configuration includes a ECM network interface.

Both these modules are controlled via AT commands through one of the
TTYs exposed. Connecting these modules may be done just by activating
the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP
on the ECM interface.
Signed-off-by: NAleksander Morgado <aleksander@aleksander.es>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include:

  stable fixes:
   - nfs/filelayout: fix oops when freeing filelayout segment
   - NFS: Fix uninitialized rpc_wait_queue

  bugfixes:
   - NFSv4/pnfs: Fix an infinite layoutget loop
   - nfs: RPC_MAX_AUTH_SIZE is in bytes"

* tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4/pnfs: Fix an infinite layoutget loop
  nfs/filelayout: fix oops when freeing filelayout segment
  sunrpc: remove redundant initialization of sock
  NFS: Fix uninitialized rpc_wait_queue
  NFS: Cleanup error handling in nfs_idmap_request_key()
  nfs: RPC_MAX_AUTH_SIZE is in bytes

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:

1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim
   Fedorenko.

2) Fix splat with mark restoration in xt_socket with non-full-sock,
   patch from Subash Abhinov Kasiviswanathan.

3) ipset bogusly bails out when adding IPv4 range containing more than
   2^31 addresses, from Jozsef Kadlecsik.

4) Incorrect pernet unregistration order in ipset, from Florian Westphal.

5) Races between dump and swap in ipset results in BUG_ON splats, from
   Ross Lagerwall.

6) Fix chain renames in nf_tables, from JingPiao Chen.

7) Fix race in pernet codepath with ebtables table registration, from
   Artem Savkov.

8) Memory leak in error path in set name allocation in nf_tables, patch
   from Arvind Yadav.

9) Don't dump chain counters if they are not available, this fixes a
   crash when listing the ruleset.

10) Fix out of bound memory read in strlcpy() in x_tables compat code,
    from Eric Dumazet.

11) Make sure we only process TCP packets in SYNPROXY hooks, patch from
    Lin Zhang.

12) Cannot load rules incrementally anymore after xt_bpf with pinned
    objects, added in revision 1. From Shmulik Ladkani.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2017-10-09

This series contains updates to ixgbe and arch/Kconfig.

Mark fixes a case where PHY register access is not supported and we were
returning a PHY address, when we should have been returning -EOPNOTSUPP.

Sabrina Dubroca fixes the use of a logical "and" when it should have been
the bitwise "and" operator.

Ding Tianhong reverts the commit that added the Kconfig bool option
ARCH_WANT_RELAX_ORDER, since there is now a new flag
PCI_DEV_FLAGS_NO_RELAXED_ORDERING that has been added to indicate that
Relaxed Ordering Attributes should not be used for Transaction Layer
Packets.  Then follows up with making the needed changes to ixgbe to
use the new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag.

John Fastabend fixes an issue in the ring accounting when the transmit
ring parameters are changed via ethtool when an XDP program is attached.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit bc044e8d ("udp: perform source validation for
mcast early demux") does not take into account that broadcast packets
lands in the same code path and they need different checks for the
source address - notably, zero source address are valid for bcast
and invalid for mcast.

As a result, 2nd and later broadcast packets with 0 source address
landing to the same socket are dropped. This breaks dhcp servers.

Since we don't have stringent performance requirements for ingress
broadcast traffic, fix it by disabling UDP early demux such traffic.
Reported-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Fixes: bc044e8d ("udp: perform source validation for mcast early demux")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It turns out that multiple places can call netlink_dump(), which means
it's still possible to dereference partially initialized values in
dump() that were the result of a faulty returned start().

This fixes the issue by calling start() _before_ setting cb_running to
true, so that there's no chance at all of hitting the dump() function
through any indirect paths.

It also moves the call to start() to be when the mutex is held. This has
the nice side effect of serializing invocations to start(), which is
likely desirable anyway. It also prevents any possible other races that
might come out of this logic.

In testing this with several different pieces of tricky code to trigger
these issues, this commit fixes all avenues that I'm aware of.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-davem-2017-10-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
pull-request: mac80211 2017-10-09

The QCA folks found another netlink problem - we were missing validation
of some attributes. It's not super problematic since one can only read a
few bytes beyond the message (and that memory must exist), but here's the
fix for it.

I thought perhaps we can make nla_parse_nested() require a policy, but
given the two-stage validation/parsing in regular netlink that won't work.

Please pull and let me know if there's any problem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2017-10-09

1) Fix some error paths of the IPsec offloading API.

2) Fix a NULL pointer dereference when IPsec is used
   with vti. From Alexey Kodanev.

3) Don't call xfrm_policy_cache_flush under xfrm_state_lock,
   it triggers several locking warnings. From Artem Savkov.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A recent patch removed the dst_free() on the allocated
dst_entry in ipv4_blackhole_route(). The dst_free() marked the
dst_entry as dead and added it to the gc list. I.e. it was setup
for a one time usage. As a result we may now have a blackhole
route cached at a socket on some IPsec scenarios. This makes the
connection unusable.

Fix this by marking the dst_entry directly at allocation time
as 'dead', so it is used only once.

Fixes: b838d5e1 ("ipv4: mark DST_NOGC and remove the operation of dst_free()")
Reported-by: NTobias Brunner <tobias@strongswan.org>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A recent patch removed the dst_free() on the allocated
dst_entry in ipv6_blackhole_route(). The dst_free() marked
the dst_entry as dead and added it to the gc list. I.e. it
was setup for a one time usage. As a result we may now have
a blackhole route cached at a socket on some IPsec scenarios.
This makes the connection unusable.

Fix this by marking the dst_entry directly at allocation time
as 'dead', so it is used only once.

Fixes: 587fea74 ("ipv6: mark DST_NOGC and remove the operation of dst_free()")
Reported-by: NTobias Brunner <tobias@strongswan.org>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Changing the TX ring parameters with an XDP program attached may
cause the XDP queues to be cleared and the TX rings to be incorrectly
configured.

Fix by doing correct ring accounting in setup call.

Fixes: 33fdc82f ("ixgbe: add support for XDP_TX action")
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Acked-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added
to indicate that Relaxed Ordering Attributes (RO) should not
be used for Transaction Layer Packets (TLP) targeted toward
these affected Root Port, it will clear the bit4 in the PCIe
Device Control register, so the PCIe device drivers could
query PCIe configuration space to determine if it can send
TLPs to Root Port with the Relaxed Ordering Attributes set.

With this new flag  we don't need the config ARCH_WANT_RELAX_ORDER
to control the Relaxed Ordering Attributes for the ixgbe drivers
just like the commit 1a8b6d76 ("net:add one common config...") did,
so revert this commit.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register
and then try to mask some bits out of the value, using the logical
instead of bitwise and operator.

Fixes: a21d0822 ("ixgbe: add support for geneve Rx offload")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In cases where PHY register access is not supported, don't mislead
a caller into thinking that it is supported by returning a PHY
address. Instead, return -EOPNOTSUPP when PHY access is not
supported.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Commit 2c16d603 ("netfilter: xt_bpf: support ebpf") introduced
support for attaching an eBPF object by an fd, with the
'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each
IPT_SO_SET_REPLACE call.

However this breaks subsequent iptables calls:

 # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT
 # iptables -A INPUT -s 5.6.7.8 -j ACCEPT
 iptables: Invalid argument. Run `dmesg' for more information.

That's because iptables works by loading existing rules using
IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with
the replacement set.

However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number
(from the initial "iptables -m bpf" invocation) - so when 2nd invocation
occurs, userspace passes a bogus fd number, which leads to
'bpf_mt_check_v1' to fail.

One suggested solution [1] was to hack iptables userspace, to perform a
"entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new,
process-local fd per every 'xt_bpf_info_v1' entry seen.

However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to
depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects.

This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given
'.fd' and instead perform an in-kernel lookup for the bpf object given
the provided '.path'.

It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named
XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is
expected to provide the path of the pinned object.

Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved.

References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2
            [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2Reported-by: NRafael Buchbinder <rafi@rbk.ms>
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but
the real server maybe reply an icmp error packet related to the exist
tcp conntrack, so we will access wrong tcp data.

Fix it by checking for the protocol field and only process tcp traffic.
Signed-off-by: NLin Zhang <xiaolou4617@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

When a bundling message is received, the function tipc_link_input()
calls function tipc_msg_extract() to unbundle all inner messages of
the bundling message before adding them to input queue.

The function tipc_msg_extract() just clones all inner skb for all
inner messagges from the bundling skb. This means that the skb
headroom of an inner message overlaps with the data part of the
preceding message in the bundle.

If the message in question is a name addressed message, it may be
subject to a secondary destination lookup, and eventually be sent out
on one of the interfaces again. But, since what is perceived as headroom
by the device driver in reality is the last bytes of the preceding
message in the bundle, the latter will be overwritten by the MAC
addresses of the L2 header. If the preceding message has not yet been
consumed by the user, it will evenually be delivered with corrupted
contents.

This commit fixes this by uncloning all messages passing through the
function tipc_msg_lookup_dest(), hence ensuring that the headroom
is always valid when the message is passed on.
Signed-off-by: NTung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We change the initialization of the skb transmit buffer queues
in the functions tipc_bcast_xmit() and tipc_rcast_xmit() to also
initialize their spinlocks. This is needed because we may, during
error conditions, need to call skb_queue_purge() on those queues
further down the stack.
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>