Clean up use of page_array, and fix an off-by-one error noticed by Tom
Talpey which causes kmalloc calls in cases where using the page_array
is sufficient.

Test plan:
Normal client functional testing with r/wsize=32768.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Same callback hierarchy inversion as for the NFS write calls. This patch is
not strictly speaking needed by the O_DIRECT code, but avoids confusing
differences between the asynchronous read and write code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch inverts the callback hierarchy for NFS write calls.

Instead of having the NFSv2/v3/v4-specific code set up the RPC callback
ops, we allow the original caller to do so. This allows for more
flexibility w.r.t. how to set up and tear down the nfs_write_data
structure while still allowing the NFSv3/v4 code to perform error
handling.

The greater flexibility is needed by the asynchronous O_DIRECT code, which
wants to be able to hold on to the original nfs_write_data structures after
the WRITE RPC call has completed in order to be able to replay them if the
COMMIT call determines that the server has rebooted.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Upon return of a write delegation, the server will almost always bump the
 change attribute. Ensure that we pick up that change so that we don't
 invalidate our data cache unnecessarily.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Most NFS server implementations allow up to 64KB reads and writes on the
 wire.  The Solaris NFS server allows up to a megabyte, for instance.

 Now the Linux NFS client supports transfer sizes up to 1MB, too.  This will
 help reduce protocol and context switch overhead on read/write intensive NFS
 workloads, and support larger atomic read and write operations on servers
 that support them.

 Test-plan:
 Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
 Tests with NFS over UDP to verify the maximum RPC payload size cap.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Get rid of some unnecessary intermediate structures
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Optimise attribute revalidation when hardlinking. Add post-op attributes
 for the directory and the original inode.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 "Optional" means that the close call will not fail if the getattr
 at the end of the compound fails.
 If it does succeed, try to refresh inode attributes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Since the directory attributes change every time we CREATE a file,
 we might as well pick up the new directory attributes in the same
 compound.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Allow nfs_refresh_inode() also to update attributes on the inode if the
 RPC call was sent after the last call to nfs_update_inode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Make NFSv4 return the fully initialized file pointer with the
 stateid that it created in the lookup w/intent.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Currently we fail to do so if the process was signalled.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Once the state_owner and lock_owner semaphores get removed, it will be
 possible for other OPEN requests to reopen the same file if they have
 lower sequence ids than our CLOSE call.
 This patch ensures that we recheck the file state once
 nfs_wait_on_sequence() has completed waiting.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all
 labelled with "sequence identifiers" in order to prevent the server from
 reordering RPC requests, as this could cause its file state to
 become out of sync with the client.

 Currently the NFS client code enforces this ordering locally using
 semaphores to restrict access to structures until the RPC call is done.
 This, of course, only works with synchronous RPC calls, since the
 user process must first grab the semaphore.
 By dropping semaphores, and instead teaching the RPC engine to hold
 the RPC calls until they are ready to be sent, we can extend this
 process to work nicely with asynchronous RPC calls too.

 This patch adds a new list called "rpc_sequence" that defines the order
 of the RPC calls to be sent. We add one such list for each state_owner.
 When an RPC call is ready to be sent, it checks if it is top of the
 rpc_sequence list. If so, it proceeds. If not, it goes back to sleep,
 and loops until it hits top of the list.
 Once the RPC call has completed, it can then bump the sequence id counter,
 and remove itself from the rpc_sequence list, and then wake up the next
 sleeper.

 Note that the state_owner sequence ids and lock_owner sequence ids are
 all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests
 are all ordered w.r.t. each other.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 This adds acl support fo nfs clients via the NFSACL protocol extension, by
 implementing the getxattr, listxattr, setxattr, and removexattr iops for the
 system.posix_acl_access and system.posix_acl_default attributes.  This patch
 implements a dumb version that uses no caching (and thus adds some overhead).
 (Another patch in this patchset adds caching as well.)
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side support for NFSv4 acls: xdr encoding and decoding routines for
 writing acls
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Client-side support for NFSv4 acls: xdr encoding and decoding routines for
 reading acls
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ACL support will require supporting additional inode operations in v4
 (getxattr, setxattr, listxattr).  This patch allows different protocol versions
 to support different inode operations by adding a file_inode_ops to the
 nfs_rpc_ops (to match the existing dir_inode_ops).
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!