Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The Linux NFSv4 server violates RFC3530 in that the change attribute is not
guaranteed to be updated for every change to the inode. Our optimisation
for checking whether or not the inode metadata has changed or not is broken
too. Grr....
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Convert a for-loop that explicitly references "NR_CPUS" into the
potentially more efficient for_each_possible_cpu() construct.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD.  This patch
contains only formatting changes, and no function change.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.

If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.

The following inode and similar caches are marked SLAB_MEM_SPREAD:

    file                               cache
    ====                               =====
    fs/adfs/super.c                    adfs_inode_cache
    fs/affs/super.c                    affs_inode_cache
    fs/befs/linuxvfs.c                 befs_inode_cache
    fs/bfs/inode.c                     bfs_inode_cache
    fs/block_dev.c                     bdev_cache
    fs/cifs/cifsfs.c                   cifs_inode_cache
    fs/coda/inode.c                    coda_inode_cache
    fs/dquot.c                         dquot
    fs/efs/super.c                     efs_inode_cache
    fs/ext2/super.c                    ext2_inode_cache
    fs/ext2/xattr.c (fs/mbcache.c)     ext2_xattr
    fs/ext3/super.c                    ext3_inode_cache
    fs/ext3/xattr.c (fs/mbcache.c)     ext3_xattr
    fs/fat/cache.c                     fat_cache
    fs/fat/inode.c                     fat_inode_cache
    fs/freevxfs/vxfs_super.c           vxfs_inode
    fs/hpfs/super.c                    hpfs_inode_cache
    fs/isofs/inode.c                   isofs_inode_cache
    fs/jffs/inode-v23.c                jffs_fm
    fs/jffs2/super.c                   jffs2_i
    fs/jfs/super.c                     jfs_ip
    fs/minix/inode.c                   minix_inode_cache
    fs/ncpfs/inode.c                   ncp_inode_cache
    fs/nfs/direct.c                    nfs_direct_cache
    fs/nfs/inode.c                     nfs_inode_cache
    fs/ntfs/super.c                    ntfs_big_inode_cache_name
    fs/ntfs/super.c                    ntfs_inode_cache
    fs/ocfs2/dlm/dlmfs.c               dlmfs_inode_cache
    fs/ocfs2/super.c                   ocfs2_inode_cache
    fs/proc/inode.c                    proc_inode_cache
    fs/qnx4/inode.c                    qnx4_inode_cache
    fs/reiserfs/super.c                reiser_inode_cache
    fs/romfs/inode.c                   romfs_inode_cache
    fs/smbfs/inode.c                   smb_inode_cache
    fs/sysv/inode.c                    sysv_inode_cache
    fs/udf/super.c                     udf_inode_cache
    fs/ufs/super.c                     ufs_inode_cache
    net/socket.c                       sock_inode_cache
    net/sunrpc/rpc_pipe.c              rpc_inode_cache

The choice of which slab caches to so mark was quite simple.  I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch.  Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.

Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE.  Some trailing whitespaces are also deleted.
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose".  This is confusing and counter-intuitive.

In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:

#ifdef MS_SILENT
  { "quiet",    0, 0, MS_SILENT    },   /* be quiet  */
  { "loud",     0, 1, MS_SILENT    },   /* print out messages. */
#endif

So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kudos to Neil Brown for spotting the problem:

"in nfs_sync_inode, there is effectively the sequence:

   nfs_wait_on_requests
   nfs_flush_inode
   nfs_commit_inode

 This seems a bit racy to me as if the only requests are on the
 ->commit list, and nfs_commit_inode is called separately after
 nfs_wait_on_requests completes, and before nfs_commit_inode start
 (say: by nfs_write_inode) then none of these function will return
 >0, yet there will be some pending request that aren't waited for."

The solution is to search for requests to wait upon, search for dirty
requests, and search for uncommitted requests while holding the
nfsi->req_lock

The patch also cleans up nfs_sync_inode(), getting rid of the redundant
FLUSH_WAIT flag. It turns out that we were always setting it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently it returns NULL, which usually gets interpreted as ENOMEM. In
fact it can mean a host of issues.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The mount statistics patches introduced a call to nfs_free_iostats that is
not only redundant, but actually causes an oops.

Also fix a memory leak due to the lack of a call to nfs_free_iostats on
unmount.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFS client now shows various RPC I/O metrics in /proc/self/mountstats.

Test plan:
Mount/umount while doing "cat /proc/self/mountstats", multiple iterations
of connectathon locking suite.  Test with NFS version 2, 3, and 4.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a field in nfs_server to record a timestamp when a mount succeeds.
Report the number of seconds the file system has been mounted via
nfs_show_stats().

Test plan:
Mount an NFS file system, watch the mountstats reports and compare with
clock time.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Invoke the byte and event counter macros where we want to count bytes and
events.

Clean-up: fix a possible NULL dereference in nfs_lock, and simplify
nfs_file_open.

Test-plan:
fsx and iozone on UP and SMP systems, with and without pre-emption.  Watch
for memory overwrite bugs, and performance loss (significantly more CPU
required per op).
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a per-superblock performance counter facility to the NFS client.  This
facility mimics the counters available for block devices and for
networking.  Expose these new counters via the new /proc/self/mountstats
interface.

Thanks to Andrew Morton and Trond Myklebust for their review and comments.

Test plan:
fsx and iozone on UP and SMP systems, with and without pre-emption.  Watch
for memory overwrite bugs, and performance loss (significantly more CPU
required per op).
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Get rid of "lock" and "posix", and spell out "vers=".

Test plan:
None.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sometimes it's important to know the exact RPC retransmit settings the
kernel is using for an NFS mount point.  Add this facility to the NFS
client's show_options method.

Test plan:
Set various retransmit settings via the mount command, and check that the
settings are reflected in /proc/mounts.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

this converts fs/nfs to kzalloc() usage.
compile tested with make allyesconfig
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The reason is that the idmapper cleanup may call flush_workqueue() on
rpciod_workqueue.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we flush out writes in the case when someone calls utimes() in
order to set the file times.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The nfs_open_context may live longer than the file descriptor that spawned
it, so it needs to carry a reference to the vfsmount. If not, then
generic_shutdown_super() may end up being called before reads and writes
have been flushed out.

Make a couple of functions static while we're at it...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Turn noatime and nodiratime into per-mount instead of per-sb flags.

After all the preparations this is a rather trivial patch.  The mount code
needs to treat the two options as per-mount instead of per-superblock, and
touch_atime needs to be changed to check the new MNT_ flags in addition to
the MS_ flags that are kept for filesystems that are always
noatime/nodiratime but not user settable anymore.  Besides that core code
only nfs needed an update because it's leaving atime updates to the server
and thus sets the S_NOATIME flag on every inode, but needs to know whether
it's a real noatime mount for an getattr optimization.

While we're at it I've killed the IS_NOATIME/IS_NODIRATIME macros that were
only used by touch_atime.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it.

See mm/filemap.c:

And changes the filemap_write_and_wait() and filemap_write_and_wait_range().

Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite()
returns error.  However, even if filemap_fdatawrite() returned an
error, it may have submitted the partially data pages to the device.
(e.g. in the case of -ENOSPC)

<quotation>
Andrew Morton writes,

If filemap_fdatawrite() returns an error, this might be due to some
I/O problem: dead disk, unplugged cable, etc.  Given the generally
crappy quality of the kernel's handling of such exceptions, there's a
good chance that the filemap_fdatawait() will get stuck in D state
forever.
</quotation>

So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO.

Trond, could you please review the nfs part?  Especially I'm not sure,
nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not.
Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 If someone changes the uid/gid mapping in userland, then we do eventually
 want those changes to be propagated to the kernel. Currently the kernel
 assumes that it may cache entries forever.

 Add an expiration time + garbage collector for idmap entries.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
 client, sets cl_chatty.  There's no reason why NLM shouldn't set it, so
 just get rid of cl_chatty and always be verbose.

 Test-plan:
 Compile with CONFIG_NFS enabled.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 ...and ensure that nfs_update_inode() respects wcc
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 The SuS states that a call to write() will cause mtime to be updated on
 the file. In order to satisfy that requirement, we need to flush out
 any cached writes in nfs_getattr().
 Speed things up slightly by not committing the writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Most NFS server implementations allow up to 64KB reads and writes on the
 wire.  The Solaris NFS server allows up to a megabyte, for instance.

 Now the Linux NFS client supports transfer sizes up to 1MB, too.  This will
 help reduce protocol and context switch overhead on read/write intensive NFS
 workloads, and support larger atomic read and write operations on servers
 that support them.

 Test-plan:
 Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
 Tests with NFS over UDP to verify the maximum RPC payload size cap.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 To help NFS users and server developers, make the "inode number mismatch"
 message display more useful information.

 Test-plan:
 None.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 nfs_statfs() generates a log message when GETATTR returns an error.  This
 is usually a useless message.  Make it a dprintk.

 Test plan:
 None
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Red Hat found a problem in the error recovery logic in __init_nfs.
Signed-off-by: NChuck Lever <cel@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Use a cred from the nfs4_client->cl_state_owners list.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Ensure we call unmap_mapping_range() and sync dirty pages to disk before
 doing an NFS direct write.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Steve Dickson writes:
 Doing the following:
 1. On server:
 $ mkdir ~/t
 $ echo Hello > ~/t/tmp

 2. On client, wait for a string to appear in this file:
 $ until grep -q foo t/tmp ; do echo -n . ; sleep 1 ; done

 3. On server, create a *new* file with the same name containing that
 string:
 $ mv ~/t/tmp ~/t/tmp.old; echo foo > ~/t/tmp

 will show how the client will never (and I mean never ;-) ) see
 the updated file.

 The problem is that we do not update nfsi->cache_change_attribute when the
 file changes on the server (we only update it when our client makes the
 changes). This again means that functions like nfs_check_verifier() will
 fail to register when the parent directory has changed and should trigger
 a dentry lookup revalidation.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 Make sure cache_change_attribute is initialized to jiffies
 so when the mtime changes on directory, the directory
 will be refreshed.

 Signed-off by: Steve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

 In cases where the server has gone insane, nfs_update_inode() may end
 up calling nfs_invalidate_inode(), which again calls stuff that takes
 the inode->i_lock that we're already holding.

 In addition, given the sort of things we have in NFS these days that
 need to be cleaned up on inode release, I'm not sure we should ever
 be calling make_bad_inode().

 Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing
 the caches, and marking the inode as being stale.

 Thanks to Steve Dickson <SteveD@redhat.com> for spotting this.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is the fs/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in fs/.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 RFC 3530 states that for OPEN_DOWNGRADE "The share_access and share_deny
 bits specified must be exactly equal to the union of the share_access and
 share_deny bits specified for some subset of the OPENs in effect for
 current openowner on the current file.

 Setattr is currently violating the NFSv4 rules for OPEN_DOWNGRADE in that
 it may cause a downgrade from OPEN4_SHARE_ACCESS_BOTH to
 OPEN4_SHARE_ACCESS_WRITE despite the fact that there exists no open file
 with O_WRONLY access mode.

 Fix the problem by replacing nfs4_find_state() with a modified version of
 nfs_find_open_context().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>