There is a race between hwpoison page and unpoison page, memory_failure
set the page hwpoison and increase num_poisoned_pages without hold page
lock, and one page count will be accounted against thp for
num_poisoned_pages.  However, unpoison can occur before memory_failure
hold page lock and split transparent hugepage, unpoison will decrease
num_poisoned_pages by 1 << compound_order since memory_failure has not yet
split transparent hugepage with page lock held.  That means we account one
page for hwpoison and 1 << compound_order for unpoison.  This patch fix it
by inserting a PageTransHuge check before doing TestClearPageHWPoison,
unpoison failed without clearing PageHWPoison and decreasing
num_poisoned_pages.

            A                                                 	B
    	memory_failue
        TestSetPageHWPoison(p);
        if (PageHuge(p))
            nr_pages = 1 << compound_order(hpage);
        else
            nr_pages = 1;
        atomic_long_add(nr_pages, &num_poisoned_pages);
                                                            unpoison_memory
	                                                        nr_pages = 1<< compound_trans_order(page);
                                                            if(TestClearPageHWPoison(p))
                                                            atomic_long_sub(nr_pages, &num_poisoned_pages);
        lock page
        if (!PageHWPoison(p))
        	unlock page and return
        hwpoison_user_mappings
        if (PageTransHuge(hpage))
        	split_huge_page(hpage);
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Suggested-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

compound lock is introduced by commit e9da73d6("thp: compound_lock."), it
is used to serialize put_page against __split_huge_page_refcount().  In
addition, transparent hugepages will be splitted in hwpoison handler and
just one subpage will be poisoned.  There is unnecessary to hold compound
lock for hugetlbfs page.  This patch replace compound_trans_order by
compond_order in the place where the page is hugetlbfs page.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memory_failure() store the page flag of the error page before doing unmap,
and (only) if the first check with page flags at the time decided the
error page is unknown, it do the second check with the stored page flag
since memory_failure() does unmapping of the error pages before doing
page_action().  This unmapping changes the page state, especially
page_remove_rmap() (called from try_to_unmap_one()) clears PG_mlocked, so
page_action() can't catch mlocked pages after that.

However, memory_failure() can't handle memory errors on dirty mlocked
pages correctly.  try_to_unmap_one will move the dirty bit from pte to the
physical page, the second check lose it since it check the stored page
flag.  This patch fix it by restore PG_dirty flag to stored page flag if
the page is dirty.

Testcase:

#define _GNU_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>

#define PAGES_TO_TEST 2
#define PAGE_SIZE	4096

int main(void)
{
	char *mem;
	int i;

	mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE,
			PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, 0, 0);

	for (i = 0; i < PAGES_TO_TEST; i++)
		mem[i * PAGE_SIZE] = 'a';

	if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1)
		return -1;

	return 0;
}

Before patch:

[  912.839247] Injecting memory failure for page 7dfb8 at 7f6b4e37b000
[  912.839257] MCE 0x7dfb8: clean mlocked LRU page recovery: Recovered
[  912.845550] MCE 0x7dfb8: clean mlocked LRU page still referenced by 1 users
[  912.852586] Injecting memory failure for page 7e6aa at 7f6b4e37c000
[  912.852594] MCE 0x7e6aa: clean mlocked LRU page recovery: Recovered
[  912.858936] MCE 0x7e6aa: clean mlocked LRU page still referenced by 1 users

After patch:

[  163.590225] Injecting memory failure for page 91bc2f at 7f9f5b0e5000
[  163.590264] MCE 0x91bc2f: dirty mlocked LRU page recovery: Recovered
[  163.596680] MCE 0x91bc2f: dirty mlocked LRU page still referenced by 1 users
[  163.603831] Injecting memory failure for page 91cdd3 at 7f9f5b0e6000
[  163.603852] MCE 0x91cdd3: dirty mlocked LRU page recovery: Recovered
[  163.610305] MCE 0x91cdd3: dirty mlocked LRU page still referenced by 1 users
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Soft offline code expects that MIGRATE_ISOLATE is set on the target page
only during soft offlining work.  But currenly it doesn't work as expected
when get_any_page() fails and returns negative value.  In the result, end
users can have unexpectedly isolated pages.  This patch just fixes it.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Set _mapcount PAGE_BUDDY_MAPCOUNT_VALUE to make the page buddy.  Not the
magic number -2.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

_PAGE_SOFT_DIRTY bit should never be set on present pte so add VM_BUG_ON
to catch any potential future abuse.

Also add a comment on _PAGE_SWP_SOFT_DIRTY definition explaining scope of
its usage.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The feature prevents mistrusted filesystems (ie: FUSE mounts created by
unprivileged users) to grow a large number of dirty pages before
throttling.  For such filesystems balance_dirty_pages always check bdi
counters against bdi limits.  I.e.  even if global "nr_dirty" is under
"freerun", it's not allowed to skip bdi checks.  The only use case for now
is fuse: it sets bdi max_ratio to 1% by default and system administrators
are supposed to expect that this limit won't be exceeded.

The feature is on if a BDI is marked by BDI_CAP_STRICTLIMIT flag.  A
filesystem may set the flag when it initializes its BDI.

The problematic scenario comes from the fact that nobody pays attention to
the NR_WRITEBACK_TEMP counter (i.e.  number of pages under fuse
writeback).  The implementation of fuse writeback releases original page
(by calling end_page_writeback) almost immediately.  A fuse request queued
for real processing bears a copy of original page.  Hence, if userspace
fuse daemon doesn't finalize write requests in timely manner, an
aggressive mmap writer can pollute virtually all memory by those temporary
fuse page copies.  They are carefully accounted in NR_WRITEBACK_TEMP, but
nobody cares.

To make further explanations shorter, let me use "NR_WRITEBACK_TEMP
problem" as a shortcut for "a possibility of uncontrolled grow of amount
of RAM consumed by temporary pages allocated by kernel fuse to process
writeback".

The problem was very easy to reproduce.  There is a trivial example
filesystem implementation in fuse userspace distribution: fusexmp_fh.c.  I
added "sleep(1);" to the write methods, then recompiled and mounted it.
Then created a huge file on the mount point and run a simple program which
mmap-ed the file to a memory region, then wrote a data to the region.  An
hour later I observed almost all RAM consumed by fuse writeback.  Since
then some unrelated changes in kernel fuse made it more difficult to
reproduce, but it is still possible now.

Putting this theoretical happens-in-the-lab thing aside, there is another
thing that really hurts real world (FUSE) users.  This is write-through
page cache policy FUSE currently uses.  I.e.  handling write(2), kernel
fuse populates page cache and flushes user data to the server
synchronously.  This is excessively suboptimal.  Pavel Emelyanov's patches
("writeback cache policy") solve the problem, but they also make resolving
NR_WRITEBACK_TEMP problem absolutely necessary.  Otherwise, simply copying
a huge file to a fuse mount would result in memory starvation.  Miklos,
the maintainer of FUSE, believes strictlimit feature the way to go.

And eventually putting FUSE topics aside, there is one more use-case for
strictlimit feature.  Using a slow USB stick (mass storage) in a machine
with huge amount of RAM installed is a well-known pain.  Let's make simple
computations.  Assuming 64GB of RAM installed, existing implementation of
balance_dirty_pages will start throttling only after 9.6GB of RAM becomes
dirty (freerun == 15% of total RAM).  So, the command "cp 9GB_file
/media/my-usb-storage/" may return in a few seconds, but subsequent
"umount /media/my-usb-storage/" will take more than two hours if effective
throughput of the storage is, to say, 1MB/sec.

After inclusion of strictlimit feature, it will be trivial to add a knob
(e.g.  /sys/devices/virtual/bdi/x:y/strictlimit) to enable it on demand.
Manually or via udev rule.  May be I'm wrong, but it seems to be quite a
natural desire to limit the amount of dirty memory for some devices we are
not fully trust (in the sense of sustainable throughput).

[akpm@linux-foundation.org: fix warning in page-writeback.c]
Signed-off-by: NMaxim Patlasov <MPatlasov@parallels.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'*lenp' may be less than "sizeof(kbuf)" so we must check this before the
next copy_to_user().

pdflush_proc_obsolete() is called by sysctl which 'procname' is
"nr_pdflush_threads", if the user passes buffer length less than
"sizeof(kbuf)", it will cause issue.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In alloc_new_pmd(), if pud_alloc() was called successfully, but
pmd_alloc() fails, avoid leaking `pud'.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use wrapper function get_vm_area_size to calculate size of vm area.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's not used globally and could be static.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 9bdac914 ("sparsemem: Put mem map for one node
together."), vmemmap for one node will be allocated together, its logic
is similar as memory allocation for pageblock flags.  This patch
introduces alloc_usemap_and_memmap to extract the same logic of memory
alloction for pageblock flags and vmemmap.
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.

Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment.  This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:

kswapd will go to sleep if the zones have been fully scanned and are still
not balanced.  As kswapd thinks there's little point trying all over again
to avoid infinite loop.  Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important.  Look at
73ce02e9 in detail.  If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0.  It assume high-order users
can still perform direct reclaim if they wish.

Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= .  This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.

In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process.  As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737

We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy.  Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.

Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable.  Because, it
is racy.  commit 929bea7c (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.

[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLisa Du <cldu@marvell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently munlock_vma_pages_range() calls follow_page_mask() to obtain
each individual struct page.  This entails repeated full page table
translations and page table lock taken for each page separately.

This patch avoids the costly follow_page_mask() where possible, by
iterating over ptes within single pmd under single page table lock.  The
first pte is obtained by get_locked_pte() for non-THP page acquired by the
initial follow_page_mask().  The rest of the on-stack pagevec for munlock
is filled up using pte_walk as long as pte_present() and vm_normal_page()
are sufficient to obtain the struct page.

After this patch, a 14% speedup was measured for munlocking a 56GB large
memory area with THP disabled.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Jörn Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The performance of the fast path in munlock_vma_range() can be further
improved by avoiding atomic ops of a redundant get_page()/put_page() pair.

When calling get_page() during page isolation, we already have the pin
from follow_page_mask().  This pin will be then returned by
__pagevec_lru_add(), after which we do not reference the pages anymore.

After this patch, an 8% speedup was measured for munlocking a 56GB large
memory area with THP disabled.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After introducing batching by pagevecs into munlock_vma_range(), we can
further improve performance by bypassing the copying into per-cpu pagevec
and the get_page/put_page pair associated with that.  Instead we perform
LRU putback directly from our pagevec.  However, this is possible only for
single-mapped pages that are evictable after munlock.  Unevictable pages
require rechecking after putting on the unevictable list, so for those we
fallback to putback_lru_page(), hich handles that.

After this patch, a 13% speedup was measured for munlocking a 56GB large
memory area with THP disabled.

[akpm@linux-foundation.org:clarify comment]
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Depending on previous batch which introduced batched isolation in
munlock_vma_range(), we can batch also the updates of NR_MLOCK page stats.
 After the whole pagevec is processed for page isolation, the stats are
updated only once with the number of successful isolations.  There were
however no measurable perfomance gains.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, munlock_vma_range() calls munlock_vma_page on each page in a
loop, which results in repeated taking and releasing of the lru_lock
spinlock for isolating pages one by one.  This patch batches the munlock
operations using an on-stack pagevec, so that isolation is done under
single lru_lock.  For THP pages, the old behavior is preserved as they
might be split while putting them into the pagevec.  After this patch, a
9% speedup was measured for munlocking a 56GB large memory area with THP
disabled.

A new function __munlock_pagevec() is introduced that takes a pagevec and:
1) It clears PageMlocked and isolates all pages under lru_lock.  Zone page
stats can be also updated using the variant which assumes disabled
interrupts.  2) It finishes the munlock and lru putback on all pages under
their lock_page.  Note that previously, lock_page covered also the
PageMlocked clearing and page isolation, but it is not needed for those
operations.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In munlock_vma_range(), lru_add_drain() is currently called in a loop
before each munlock_vma_page() call.

This is suboptimal for performance when munlocking many pages.  The
benefits of per-cpu pagevec for batching the LRU putback are removed since
the pagevec only holds at most one page from the previous loop's
iteration.

The lru_add_drain() call also does not serve any purposes for correctness
- it does not even drain pagavecs of all cpu's.  The munlock code already
expects and handles situations where a page cannot be isolated from the
LRU (e.g.  because it is on some per-cpu pagevec).

The history of the (not commented) call also suggest that it appears there
as an oversight rather than intentionally.  Before commit ff6a6da6 ("mm:
accelerate munlock() treatment of THP pages") the call happened only once
upon entering the function.  The commit has moved the call into the while
loope.  So while the other changes in the commit improved munlock
performance for THP pages, it introduced the abovementioned suboptimal
per-cpu pagevec usage.

Further in history, before commit 408e82b7 ("mm: munlock use
follow_page"), munlock_vma_pages_range() was just a wrapper around
__mlock_vma_pages_range which performed both mlock and munlock depending
on a flag.  However, before ba470de4 ("mmap: handle mlocked pages during
map, remap, unmap") the function handled only mlock, not munlock.  The
lru_add_drain call thus comes from the implementation in commit b291f000
("mlock: mlocked pages are unevictable" and was intended only for
mlocking, not munlocking.  The original intention of draining the LRU
pagevec at mlock time was to ensure the pages were on the LRU before the
lock operation so that they could be placed on the unevictable list
immediately.  There is very little motivation to do the same in the
munlock path this, particularly for every single page.

This patch therefore removes the call completely.  After removing the
call, a 10% speedup was measured for munlock() of a 56GB large memory area
with THP disabled.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The goal of this patch series is to improve performance of munlock() of
large mlocked memory areas on systems without THP.  This is motivated by
reported very long times of crash recovery of processes with such areas,
where munlock() can take several seconds.  See
http://lwn.net/Articles/548108/

The work was driven by a simple benchmark (to be included in mmtests) that
mmaps() e.g.  56GB with MAP_LOCKED | MAP_POPULATE and measures the time of
munlock().  Profiling was performed by attaching operf --pid to the
process and sending a signal to trigger the munlock() part and then notify
bach the monitoring wrapper to stop operf, so that only munlock() appears
in the profile.

The profiles have shown that CPU time is spent mostly by atomic operations
and repeated locking per single pages. This series aims to reduce both, starting
from simpler to more complex changes.

Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base
	type is not determined without being actually needed.

Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu
	pagevec after each munlocked page is put there.

Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating
	multiple non-THP pages under a single lru_lock instead of locking and
	processing each page separately.

Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec
	introduced by previous patch.

Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page
	when possible, bypassing the per-cpu pvec and associated overhead.

Patch 6 removes a redundant get_page/put_page pair which saves costly atomic
	operations.

Patch 7 avoids calling follow_page_mask() on each individual page, and obtains
	multiple page references under a single page table lock where possible.

Measurements were made using 3.11-rc3 as a baseline.  The first set of
measurements shows the possibly ideal conditions where batching should
help the most.  All memory is allocated from a single NUMA node and THP is
disabled.

timedmunlock
                            3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3
                                   0                     1                     2                     3                     4                     5                     6                     7
Elapsed min           3.38 (  0.00%)        3.39 ( -0.13%)        3.00 ( 11.33%)        2.70 ( 20.20%)        2.67 ( 21.11%)        2.37 ( 29.88%)        2.20 ( 34.91%)        1.91 ( 43.59%)
Elapsed mean          3.39 (  0.00%)        3.40 ( -0.23%)        3.01 ( 11.33%)        2.70 ( 20.26%)        2.67 ( 21.21%)        2.38 ( 29.88%)        2.21 ( 34.93%)        1.92 ( 43.46%)
Elapsed stddev        0.01 (  0.00%)        0.01 (-43.09%)        0.01 ( 15.42%)        0.01 ( 23.42%)        0.00 ( 89.78%)        0.01 ( -7.15%)        0.00 ( 76.69%)        0.02 (-91.77%)
Elapsed max           3.41 (  0.00%)        3.43 ( -0.52%)        3.03 ( 11.29%)        2.72 ( 20.16%)        2.67 ( 21.63%)        2.40 ( 29.50%)        2.21 ( 35.21%)        1.96 ( 42.39%)
Elapsed range         0.03 (  0.00%)        0.04 (-51.16%)        0.02 (  6.27%)        0.02 ( 14.67%)        0.00 ( 88.90%)        0.03 (-19.18%)        0.01 ( 73.70%)        0.06 (-113.35%

The second set of measurements simulates the worst possible conditions for
batching by using numactl --interleave, so that there is in fact only one
page per pagevec.  Even in this case the series seems to improve
performance thanks to reduced atomic operations and removal of
lru_add_drain().

timedmunlock
                            3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3
                                   0                     1                     2                     3                     4                     5                     6                     7
Elapsed min           4.00 (  0.00%)        4.04 ( -0.93%)        3.87 (  3.37%)        3.72 (  6.94%)        3.81 (  4.72%)        3.69 (  7.82%)        3.64 (  8.92%)        3.41 ( 14.81%)
Elapsed mean          4.17 (  0.00%)        4.15 (  0.51%)        4.03 (  3.49%)        3.89 (  6.84%)        3.86 (  7.48%)        3.89 (  6.69%)        3.70 ( 11.27%)        3.48 ( 16.59%)
Elapsed stddev        0.16 (  0.00%)        0.08 ( 50.76%)        0.10 ( 41.58%)        0.16 (  4.59%)        0.05 ( 72.38%)        0.19 (-12.91%)        0.05 ( 68.09%)        0.06 ( 66.03%)
Elapsed max           4.34 (  0.00%)        4.32 (  0.56%)        4.19 (  3.62%)        4.12 (  5.15%)        3.91 (  9.88%)        4.12 (  5.25%)        3.80 ( 12.58%)        3.56 ( 18.08%)
Elapsed range         0.34 (  0.00%)        0.28 ( 17.91%)        0.32 (  6.45%)        0.40 (-15.73%)        0.10 ( 70.06%)        0.43 (-24.84%)        0.15 ( 55.32%)        0.15 ( 56.16%)

For completeness, a third set of measurements shows the situation where
THP is enabled and allocations are again done on a single NUMA node.  Here
munlock() is already very fast thanks to huge pages, and this series does
not compromise that performance.  It seems that the removal of call to
lru_add_drain() still helps a bit.

timedmunlock
                            3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3              3.11-rc3
                                   0                     1                     2                     3                     4                     5                     6                     7
Elapsed min           0.01 (  0.00%)        0.01 ( -0.11%)        0.01 (  6.59%)        0.01 (  5.41%)        0.01 (  5.45%)        0.01 (  5.03%)        0.01 (  6.08%)        0.01 (  5.20%)
Elapsed mean          0.01 (  0.00%)        0.01 ( -0.27%)        0.01 (  6.39%)        0.01 (  5.30%)        0.01 (  5.32%)        0.01 (  5.03%)        0.01 (  5.97%)        0.01 (  5.22%)
Elapsed stddev        0.00 (  0.00%)        0.00 ( -9.59%)        0.00 ( 10.77%)        0.00 (  3.24%)        0.00 ( 24.42%)        0.00 ( 31.86%)        0.00 ( -7.46%)        0.00 (  6.11%)
Elapsed max           0.01 (  0.00%)        0.01 ( -0.01%)        0.01 (  6.83%)        0.01 (  5.42%)        0.01 (  5.79%)        0.01 (  5.53%)        0.01 (  6.08%)        0.01 (  5.26%)
Elapsed range         0.00 (  0.00%)        0.00 (  7.30%)        0.00 ( 24.38%)        0.00 (  6.10%)        0.00 ( 30.79%)        0.00 ( 42.52%)        0.00 (  6.11%)        0.00 ( 10.07%)

This patch (of 7):

In putback_lru_page() since commit c53954a0 (""mm: remove lru parameter
from __lru_cache_add and lru_cache_add_lru") it is no longer needed to
determine lru list via page_lru_base_type().

This patch replaces it with simple flag is_unevictable which says that the
page was put on the inevictable list.  This is the only information that
matters in subsequent tests.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NJörn Engel <joern@logfs.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pavel reported that in case if vma area get unmapped and then mapped (or
expanded) in-place, the soft dirty tracker won't be able to recognize this
situation since it works on pte level and ptes are get zapped on unmap,
loosing soft dirty bit of course.

So to resolve this situation we need to track actions on vma level, there
VM_SOFTDIRTY flag comes in.  When new vma area created (or old expanded)
we set this bit, and keep it here until application calls for clearing
soft dirty bit.

Thus when user space application track memory changes now it can detect if
vma area is renewed.
Reported-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpuset_zone_allowed is changed to cpuset_zone_allowed_softwall and the
comment is moved to __cpuset_node_allowed_softwall.  So fix this comment.
Signed-off-by: NSeungHun Lee <waydi1@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case when system contains no dirty pages, wakeup_flusher_threads() will
submit WB_SYNC_NONE writeback for 0 pages so wb_writeback() exits
immediately without doing anything, even though there are dirty inodes in
the system.  Thus sync(1) will write all the dirty inodes from a
WB_SYNC_ALL writeback pass which is slow.

Fix the problem by using get_nr_dirty_pages() in wakeup_flusher_threads()
instead of calculating number of dirty pages manually.  That function also
takes number of dirty inodes into account.
Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: NPaul Taysom <taysom@chromium.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I am working with a tool that simulates oracle database I/O workload.
This tool (orion to be specific -
<http://docs.oracle.com/cd/E11882_01/server.112/e16638/iodesign.htm#autoId24>)
allocates hugetlbfs pages using shmget() with SHM_HUGETLB flag.  It then
does aio into these pages from flash disks using various common block
sizes used by database.  I am looking at performance with two of the most
common block sizes - 1M and 64K.  aio performance with these two block
sizes plunged after Transparent HugePages was introduced in the kernel.
Here are performance numbers:

		pre-THP		2.6.39		3.11-rc5
1M read		8384 MB/s	5629 MB/s	6501 MB/s
64K read	7867 MB/s	4576 MB/s	4251 MB/s

I have narrowed the performance impact down to the overheads introduced by
THP in __get_page_tail() and put_compound_page() routines.  perf top shows
>40% of cycles being spent in these two routines.  Every time direct I/O
to hugetlbfs pages starts, kernel calls get_page() to grab a reference to
the pages and calls put_page() when I/O completes to put the reference
away.  THP introduced significant amount of locking overhead to get_page()
and put_page() when dealing with compound pages because hugepages can be
split underneath get_page() and put_page().  It added this overhead
irrespective of whether it is dealing with hugetlbfs pages or transparent
hugepages.  This resulted in 20%-45% drop in aio performance when using
hugetlbfs pages.

Since hugetlbfs pages can not be split, there is no reason to go through
all the locking overhead for these pages from what I can see.  I added
code to __get_page_tail() and put_compound_page() to bypass all the
locking code when working with hugetlbfs pages.  This improved performance
significantly.  Performance numbers with this patch:

		pre-THP		3.11-rc5	3.11-rc5 + Patch
1M read		8384 MB/s	6501 MB/s	8371 MB/s
64K read	7867 MB/s	4251 MB/s	6510 MB/s

Performance with 64K read is still lower than what it was before THP, but
still a 53% improvement.  It does mean there is more work to be done but I
will take a 53% improvement for now.

Please take a look at the following patch and let me know if it looks
reasonable.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: NKhalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If kswapd was reclaiming for a high order and resets it to 0 due to
fragmentation it will still call compact_pgdat.  For the most part, this
will fail a compaction_suitable() test and not compact but it is
unnecessarily sloppy.  It could be fixed in the caller but fix it in the
API instead.

[dhillf@gmail.com: pointed out that it was a potential problem]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Hillf Danton <dhillf@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memcg_cache_params structure contains the common part and the union,
which represents two different types of data: one for root cashes and
another for child caches.

The size of child data is fixed.  The size of the memcg_caches array is
calculated in runtime.

Currently the size of memcg_cache_params for root caches is calculated
incorrectly, because it includes the size of parameters for child caches.

ssize_t size = memcg_caches_array_size(num_groups);
size *= sizeof(void *);

size += sizeof(struct memcg_cache_params);

v2: Fix a typo in calculations
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current early_pfn_to_nid() on arch that support memblock go over
memblock.memory one by one, so will take too many try near the end.

We can use existing memblock_search to find the node id for given pfn,
that could save some time on bigger system that have many entries
memblock.memory array.

Here are the timing differences for several machines.  In each case with
the patch less time was spent in __early_pfn_to_nid().

                        3.11-rc5        with patch      difference (%)
                        --------        ----------      --------------
UV1: 256 nodes  9TB:     411.66          402.47         -9.19 (2.23%)
UV2: 255 nodes 16TB:    1141.02         1138.12         -2.90 (0.25%)
UV2:  64 nodes  2TB:     128.15          126.53         -1.62 (1.26%)
UV2:  32 nodes  2TB:     121.87          121.07         -0.80 (0.66%)
                        Time in seconds.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

new_vma_page() is called only by page migration called from do_mbind(),
where pages to be migrated are queued into a pagelist by
queue_pages_range().  queue_pages_range() confirms that a queued page
belongs to some vma, so !vma case is not supposed to be happen.  This
patch adds BUG_ON() to catch this unexpected case.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function check_range() (and its family) is not well-named, because it
does not only checking something, but moving pages from list to list to do
page migration for them.  So queue_pages_*range is more desirable name.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now hugepage migration is enabled, although restricted on pmd-based
hugepages for now (due to lack of testing.) So we should allocate
migratable hugepages from ZONE_MOVABLE if possible.

This patch makes GFP flags in hugepage allocation dependent on migration
support, not only the value of hugepages_treat_as_movable.  It provides no
change on the behavior for architectures which do not support hugepage
migration,
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration works well only for pmd-based hugepages
(mainly due to lack of testing,) so we had better not enable migration of
other levels of hugepages until we are ready for it.

Some users of hugepage migration (mbind, move_pages, and migrate_pages) do
page table walk and check pud/pmd_huge() there, so they are safe.  But the
other users (softoffline and memory hotremove) don't do this, so without
this patch they can try to migrate unexpected types of hugepages.

To prevent this, we introduce hugepage_migration_support() as an
architecture dependent check of whether hugepage are implemented on a pmd
basis or not.  And on some architecture multiple sizes of hugepages are
available, so hugepage_migration_support() also checks hugepage size.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Until now we can't offline memory blocks which contain hugepages because a
hugepage is considered as an unmovable page.  But now with this patch
series, a hugepage has become movable, so by using hugepage migration we
can offline such memory blocks.

What's different from other users of hugepage migration is that we need to
decompose all the hugepages inside the target memory block into free buddy
pages after hugepage migration, because otherwise free hugepages remaining
in the memory block intervene the memory offlining.  For this reason we
introduce new functions dissolve_free_huge_page() and
dissolve_free_huge_pages().

Other than that, what this patch does is straightforwardly to add hugepage
migration code, that is, adding hugepage code to the functions which scan
over pfn and collect hugepages to be migrated, and adding a hugepage
allocation function to alloc_migrate_target().

As for larger hugepages (1GB for x86_64), it's not easy to do hotremove
over them because it's larger than memory block.  So we now simply leave
it to fail as it is.

[yongjun_wei@trendmicro.com.cn: remove duplicated include]
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Enable hugepage migration from migrate_pages(2), move_pages(2), and
mbind(2).
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend do_mbind() to handle vma with VM_HUGETLB set.  We will be able to
migrate hugepage with mbind(2) after applying the enablement patch which
comes later in this series.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend move_pages() to handle vma with VM_HUGETLB set.  We will be able to
migrate hugepage with move_pages(2) after applying the enablement patch
which comes later in this series.

We avoid getting refcount on tail pages of hugepage, because unlike thp,
hugepage is not split and we need not care about races with splitting.

And migration of larger (1GB for x86_64) hugepage are not enabled.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Extend check_range() to handle vma with VM_HUGETLB set.  We will be able
to migrate hugepage with migrate_pages(2) after applying the enablement
patch which comes later in this series.

Note that for larger hugepages (covered by pud entries, 1GB for x86_64 for
example), we simply skip it now.

Note that using pmd_huge/pud_huge assumes that hugepages are pointed to by
pmd/pud.  This is not true in some architectures implementing hugepage
with other mechanisms like ia64, but it's OK because pmd_huge/pud_huge
simply return 0 in such arch and page walker simply ignores such
hugepages.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently migrate_huge_page() takes a pointer to a hugepage to be migrated
as an argument, instead of taking a pointer to the list of hugepages to be
migrated.  This behavior was introduced in commit 189ebff2 ("hugetlb:
simplify migrate_huge_page()"), and was OK because until now hugepage
migration is enabled only for soft-offlining which migrates only one
hugepage in a single call.

But the situation will change in the later patches in this series which
enable other users of page migration to support hugepage migration.  They
can kick migration for both of normal pages and hugepages in a single
call, so we need to go back to original implementation which uses linked
lists to collect the hugepages to be migrated.

With this patch, soft_offline_huge_page() switches to use migrate_pages(),
and migrate_huge_page() is not used any more.  So let's remove it.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration is available only for soft offlining, but
it's also useful for some other users of page migration (clearly because
users of hugepage can enjoy the benefit of mempolicy and memory hotplug.)
So this patchset tries to extend such users to support hugepage migration.

The target of this patchset is to enable hugepage migration for NUMA
related system calls (migrate_pages(2), move_pages(2), and mbind(2)), and
memory hotplug.

This patchset does not add hugepage migration for memory compaction,
because users of memory compaction mainly expect to construct thp by
arranging raw pages, and there's little or no need to compact hugepages.
CMA, another user of page migration, can have benefit from hugepage
migration, but is not enabled to support it for now (just because of lack
of testing and expertise in CMA.)

Hugepage migration of non pmd-based hugepage (for example 1GB hugepage in
x86_64, or hugepages in architectures like ia64) is not enabled for now
(again, because of lack of testing.)

As for how these are achived, I extended the API (migrate_pages()) to
handle hugepage (with patch 1 and 2) and adjusted code of each caller to
check and collect movable hugepages (with patch 3-7).  Remaining 2 patches
are kind of miscellaneous ones to avoid unexpected behavior.  Patch 8 is
about making sure that we only migrate pmd-based hugepages.  And patch 9
is about choosing appropriate zone for hugepage allocation.

My test is mainly functional one, simply kicking hugepage migration via
each entry point and confirm that migration is done correctly.  Test code
is available here:

  git://github.com/Naoya-Horiguchi/test_hugepage_migration_extension.git

And I always run libhugetlbfs test when changing hugetlbfs's code.  With
this patchset, no regression was found in the test.

This patch (of 9):

Before enabling each user of page migration to support hugepage,
this patch enables the list of pages for migration to link not only
LRU pages, but also hugepages. As a result, putback_movable_pages()
and migrate_pages() can handle both of LRU pages and hugepages.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we fail with a reserved page, just calling put_page() is not
sufficient, because put_page() invoke free_huge_page() at last step and it
doesn't know whether a page comes from a reserved pool or not.  So it
doesn't do anything related to reserved count.  This makes reserve count
lower than how we need, because reserve count already decrease in
dequeue_huge_page_vma().  This patch fix this situation.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't need to grab a page_table_lock when we try to release a page.
So, defer to grab a page_table_lock.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NDavidlohr Bueso <davidlohr@hp.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>