提交 · 0ccd8c39bc664bf5e9fcc26caad50cc17ff866d1 · openanolis / cloud-kernel

27 8月, 2008 1 次提交
- B
  Blackfin arch: move include/asm-blackfin header files to arch/blackfin · 639f6571
  由 Bryan Wu 提交于 8月 27, 2008
```
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  639f6571
14 8月, 2008 2 次提交
- M
  Blackfin arch: do not muck with the UART during boot -- let the serial driver worry about it · 7e1e7aed
  由 Mike Frysinger 提交于 8月 14, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  7e1e7aed
- M
  Blackfin arch: mark some functions as __init as they are only called from __init functions · 9216bbc8
  由 Mike Frysinger 提交于 8月 14, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  9216bbc8
06 8月, 2008 4 次提交

Blackfin arch: Fix Bug - System with EMAC driver enabled - Core not idling · 56f5f590

由 Michael Hennerich 提交于 8月 06, 2008

 - Disable all bits in SIC_IWR unless we are going into a real (DPMC)
   power saving mode. Any Interrupt can wake the core form it's idle state.

 - Remove deep sleep mode as it is not going to be used anywhere:
   We support sleep, sleep deeper and hibernate.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

56f5f590

Blackfin arch: unify the duplicated portions of __start and split... · 17e89bcf

由 Mike Frysinger 提交于 8月 06, 2008

Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

17e89bcf

Blackfin arch: move async memory programming into common setup_arch() as the... · 7e64acab

由 Mike Frysinger 提交于 8月 06, 2008

Blackfin arch: move async memory programming into common setup_arch() as the banks dont really need to be setup fully as early as head.S
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

7e64acab

M
Blackfin arch: unify the duplicated _real_start functions · 09e1f70e
由 Mike Frysinger 提交于 8月 06, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
09e1f70e

05 8月, 2008 1 次提交
- R
  Blackfin arch: be consistant with parition names, and ensure the bus is identified · aa582977
  由 Robin Getz 提交于 8月 05, 2008
```
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  aa582977
26 7月, 2008 1 次提交
- M
  Blackfin arch: Add ISP1760 board resources to BF548-EZKIT · 0a6304a9
  由 Michael Hennerich 提交于 7月 26, 2008
```
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  0a6304a9
19 7月, 2008 1 次提交
- M
  Blackfin arch: add missing IORESOURCE_MEM flags to UART3 · cc2e16bd
  由 Mike Frysinger 提交于 7月 19, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  cc2e16bd
14 7月, 2008 1 次提交

Blackfin arch: Fix bug - Kernel does not boot if re-program clocks · 68e2fc78

由 Michael Hennerich 提交于 7月 14, 2008

Don't write conflicting data to EBIU_SDBCTL after the SDRAM is
configured. This can cause data corruption, since we might change SDRAM
row and column addressing modes.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

68e2fc78

07 6月, 2008 1 次提交
- M
  Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN · 5bda2723
  由 Mike Frysinger 提交于 6月 07, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  5bda2723
31 5月, 2008 1 次提交

Blackfin arch: Remove bad and usless code · b06dcee9

由 Michael Hennerich 提交于 5月 31, 2008

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

b06dcee9

20 5月, 2008 1 次提交

Blackfin arch: Cleanup no functional changes · f086f234

由 Michael Hennerich 提交于 5月 20, 2008

Singed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

f086f234

10 5月, 2008 1 次提交
- M
  [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined · e4f7c0bf
  由 Mike Frysinger 提交于 5月 10, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  e4f7c0bf
07 5月, 2008 1 次提交
- M
  [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support · 14b03204
  由 Michael Hennerich 提交于 5月 07, 2008
```
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  14b03204
30 4月, 2008 1 次提交

i2c: Convert most new-style drivers to use module aliasing · 3760f736

由 Jean Delvare 提交于 4月 29, 2008

Based on earlier work by Jon Smirl and Jochen Friedrich.

Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: Jochen Friedrich <jochen@scram.de>

3760f736

04 3月, 2008 1 次提交
- M
  [Blackfin] arch: fix bug - allow SDH driver to be used as module · 3d7e6cf8
  由 Michael Hennerich 提交于 3月 03, 2008
```
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  3d7e6cf8
25 4月, 2008 2 次提交

M
[Blackfin] arch: Functional power management support: Remove broken cpu frequency scaling drivers · fe44193c
由 Michael Hennerich 提交于 4月 25, 2008
```
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
fe44193c

[Blackfin] arch: add Blackfin on-chip SIR IrDA driver support · 5be36d22

由 Graf Yang 提交于 4月 25, 2008

 - add platform device resources in board files
 - add new bfin_sir.h to each machines
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

5be36d22

24 4月, 2008 6 次提交

G
[Blackfin] arch: Adjust the u-boot and kernel image partition size in mtd device. · ac76d889
由 Grace Pan 提交于 4月 24, 2008
```
Signed-off-by: NGrace Pan <grace.pan@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
ac76d889

[Blackfin] arch: Give the DMA base registers a more descriptive name · 77955664

由 Bernd Schmidt 提交于 4月 24, 2008

The DMA base registers are available in a global named "base_addr" for
every Blackfin variant. Give this a more descriptive name, and remove
duplicate tables from some drivers.
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

77955664

B
[Blackfin] arch: Consistently export base_addr for all Blackfin variants. · ac86a978
由 Bernd Schmidt 提交于 4月 24, 2008
```
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
ac86a978
B
[Blackfin] arch: Allow AD1836A board to be connected, either to SPORT2 or SPORT3. · 37fa2421
由 Bernd Schmidt 提交于 4月 24, 2008
```
Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
37fa2421

[Blackfin] arch: theres no need to declare ram{end,start,base} in the head.S files · 3132b586

由 Mike Frysinger 提交于 4月 24, 2008

theres no need to declare ram{end,start,base} in the head.S files
when declaring them with the other memory related variables in setup.c
is so much simpler/nicer
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

3132b586

[Blackfin] arch: Apply Bluetechnix vendor patch · db68254f

由 Michael Hennerich 提交于 4月 24, 2008

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

db68254f

23 4月, 2008 1 次提交

[Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__ · b85d858b

由 Harvey Harrison 提交于 4月 23, 2008

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

b85d858b

26 3月, 2008 2 次提交
- B
  [Blackfin] arch: add i2c board info struct and move to new-style i2c interface · 81d9c7f2
  由 Bryan Wu 提交于 3月 26, 2008
```
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  81d9c7f2
- M
  [Blackfin] arch: conditionally enable flash resources since it requests the async memory bank · 793dc27b
  由 Mike Frysinger 提交于 3月 26, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  793dc27b
09 2月, 2008 2 次提交

M
[Blackfin] arch: fix build fails only include header files when enabled · 67f2d33e
由 Mike Frysinger 提交于 2月 09, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
```
67f2d33e

[Blackfin] arch: Encourage users to use the spidev character driver: Provide platform support · 6e668936

由 Michael Hennerich 提交于 2月 09, 2008

 - Enable kernel generic spidev driver for blackfin SPI ADC
 - spi_adc driver, document and test sample not synced
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

6e668936

02 2月, 2008 2 次提交
- M
  [Blackfin] arch: this is an ezkit, not a stamp, so fixup the init function name · a01d7a76
  由 Mike Frysinger 提交于 2月 02, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
```
  a01d7a76
- M
  [Blackfin] arch: Fix header file information · a680ae9b
  由 Michael Hennerich 提交于 2月 02, 2008
```
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
```
  a680ae9b
29 2月, 2008 1 次提交
- B
  [Blackfin] arch: kill section mismatch warnings · c051489d
  由 Bryan Wu 提交于 2月 29, 2008
```
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  c051489d
22 2月, 2008 1 次提交
- M
  [Blackfin] arch: add board resources for new simple-gpio char driver · cad2ab65
  由 Mike Frysinger 提交于 2月 22, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  cad2ab65
25 2月, 2008 1 次提交

[Blackfin] arch: fix bug - set right partition size in the board files · edf05641

由 Mike Frysinger 提交于 2月 25, 2008

 - set default u-boot partition size to 256k
 - modify the offset with the size change
 - use mtd defines (append for offset and full for size)
   where applicable rather than churning constants when we dont have to
Signed-off-by: NGrace Pan <grace.pan@analog.com>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>

edf05641

22 2月, 2008 1 次提交
- M
  [Blackfin] arch: fix bug add missing header file · 7aa475cf
  由 Mike Frysinger 提交于 2月 22, 2008
```
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
```
  7aa475cf
21 11月, 2007 2 次提交

M
Blackfin arch: fix building for BF542 processors which only have 1 TWI · 7160e950
由 Mike Frysinger 提交于 11月 21, 2007
```
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
```
7160e950

Blackfin arch: fix bug NOR Flash MTD mount fail · e40540b3

由 Sonic Zhang 提交于 11月 21, 2007

Config EBIU flash mode properly. EBIU_MODE EBIU_FCTL
EBIU_MBSCTL register should be configurd to Flash
mode.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

e40540b3

24 1月, 2008 1 次提交
- M
  [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver · de8c43f2
  由 Mike Frysinger 提交于 1月 24, 2008
```
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
```
  de8c43f2

openanolis / cloud-kernel 1 年多 前同步成功

openanolis / cloud-kernel
1 年多前同步成功