remove unmatched comment end.
Signed-off-by: NJean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Ordinarily, memory holes in flatmem still have a valid memmap and is safe
to use. However, an architecture (ARM) frees up the memmap backing memory
holes on the assumption it is never used. /proc/pagetypeinfo reads the
whole range of pages in a zone believing that the memmap is valid and that
pfn_valid will return false if it is not. On ARM, freeing the memmap breaks
the page->zone linkages even though pfn_valid() returns true and the kernel
can oops shortly afterwards due to accessing a bogus struct zone *.

This patch lets architectures say when FLATMEM can have holes in the
memmap. Rather than an expensive check for valid memory, /proc/pagetypeinfo
will confirm that the page linkages are still valid by checking page->zone
is still the expected zone. The lookup of page_zone is safe as there is a
limited range of memory that is accessed when calling page_zone.  Even if
page_zone happens to return the correct zone, the impact is that the counters
in /proc/pagetypeinfo are slightly off but fragmentation monitoring is
unlikely to be relevant on an embedded system.
Reported-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch changes arm to use the new bcd2bin/bin2bcd functions instead
of the obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Taken from omap 97b705ad835f1481270c4b67b402d6e37fa8ad15:
  ARM: OMAP: Misc compile fixes after syncing with mainline

  Also fix 2430 smc91x to use IRQ_LOWLEVEL.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update omap_h2_1610 and omap_osk_5912 default configurations.

Add ams delta, n770, omap 2430sdp, apollon_2420, generic 1510, 1610,
1710, 2420, h4 2420, innovator 1510 and 1610, perseus2 730, palte,
palmtt, palmz71 and sx1 default configurations.

Pulled out of the omap zoom tree.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the S3C2443 clock register definitions for selecting the EPLL
reference clock described by S3C2443_CLKSRC_EPLLREF.
Signed-off-by: NWei Shuai <cpuwolf@gmail.com>
[ben-linux@fluff.org: minor description fixes]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The first spi bus is registered with number 0, but
the board data says that the device on it is registered
on bus 1.

Move the spi bus to bus 1 to keep the compatibility with the
original board-support patches.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move debugging output to dev_dbg() instead of dev_info().
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm.c:

warning: symbol 's3c_device_timer' was not declared. Should it be static?
warning: symbol 'pwm_calc_tin' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm-clock.c:

warning: symbol 'clk_timer_scaler' was not declared. Should it be static?
warning: symbol 'clk_timer_tclk' was not declared. Should it be static?
warning: symbol 'clk_timer_tdiv' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following problems spotted by sparse:

warning: symbol 's3c24xx_gpiolib_input' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_output' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_set' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_get' was not declared. Should it be static?
warning: symbol 'gpios' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the following sparse errors in arch/arm/mach-s3c2410/nor-simtec.c:

53:27: warning: symbol 'simtec_nor_pdata' was not declared. Should it be static?
77:13: warning: symbol 'nor_simtec_init' was not declared. Should it be static?
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

corgi, spitz and poodle have audio codecs on their primary I2C bus so
need to call pxa_set_i2c_info() to set it up during init. Tested on
spitz by Stanislav.
Reported-by: NStanislav Brabec <utx@penguin.cz>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch lets the files using linux/version.h match the files that
#include it.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NNicolas Pitre <nico@marvell.com>

Register UART1 on QNAP TS-209 and TS-409 because the PIC controller
is connected to it.  This fixes a regression from 2.6.26.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

The lm75 driver was recently converted to the new-style binding,
so now it can be loaded from the DNS-323 support code.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Tested-by: NTobias Poschwatta <tp@fonz.de>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

Flash needs to be set up before we can try to read the MAC address
from there.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

The Kurobox Pro crashes when any of the PCI controller registers
are accessed.  This patch adds a function to the Orion PCI handling
code that board support code can call to disable enumerating the
PCI bus entirely, and makes the Kurobox Pro PCI-related init code
call this function.
Signed-off-by: NPer Andersson <avtobiff@gmail.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>

Fix
arch/arm/mach-pxa/pxa300.c:94: error: 'CKEN_MMC3' undeclared here (not in a function)
when building for PXA300.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch against 2.6.27-rc3 does the following changes to FSG-3 setup code:

1) Enable RTC on FSG-3 (proper name is needed). This change is needed due to a recent change in i2c.

2) i variable is only used when compiling for big endian.
So move its declaration to ARMEB ifdef to silence the warning when compiling for LE.

Mailing list link:
http://lists.arm.linux.org.uk/lurker/message/20080813.091556.cae2917e.en.htmlSigned-off-by: NTomasz Chmielewski <mangoo@wpkg.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

  CC      arch/arm/mach-integrator/impd1.o
arch/arm/mach-integrator/impd1.c: In function `impd1_probe':
arch/arm/mach-integrator/impd1.c:408: warning: too few arguments for format
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch removes CVS keywords that weren't updated for a long time.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Another fix of inconsistent shift of the LCD_BIAS_ACTIVE_* and
LCD_PCLK_EDGE_* is also included.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With gcc 4.3 and later, a pointer that has already been dereferenced is
assumed not to be null since it should have caused a segmentation fault
otherwise, hence any subsequent test against NULL is optimized away.

Current inline asm constraint used in the implementation of prefetch()
makes gcc believe that the pointer is dereferenced even though the PLD
instruction does not load any data and does not cause a segmentation
fault on null pointers, which causes all sorts of interesting results
when reaching the end of a linked lists for example.

Let's use a better constraint to properly represent the actual usage of
the pointer value.

Problem reported by Chris Steel.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control
page is used for not only code on some platform.  For example in kexec
jump, it is used for data and stack too.

[akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion]
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use platform_data to pass musb configuration-specific
details to musb driver.

This patch will prevent that other platforms selecting
HAVE_CLK and enabling musb won't break tree building.

The other parts of it will come when linux-omap merge
up more omap2/3 board-files.
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... otherwise these fail to build.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 2ccdd1e7 doesn't add
v7wbi_possible_flags and v7wbi_always_flags to possible_tlb_flags and
always_tlb_flags.  This causes the L2 cache flush in clean_pmd_entry()
(intended for Feroceon only) to execute on ARMv7, and the CPU hangs.

This patch is required for OMAP3 boards to boot.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two
small whitespace issues while being there.
Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Calling the undefined instruction handler functions with a
spinlock held is a recipe for must_sleep() warnings.  Avoid it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix Poodle ASoC compilation by providing Poodle LoCoMo GPIO names.

Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

    This patch updates e400 to use the new MFP GPIO setup code.
Signed-off-by: NIan Molton <spyro@f2s.com>

This patch updates e740 to use the new MFP GPIO setup code.
Signed-off-by: NIan Molton <spyro@f2s.com>

The max IRQ is too small for all e-series machines which have at least one
GPIO expander chip in them.
Signed-off-by: NIan Molton <spyro@f2s.com>

This patch removes the hardcoded alias array from pxa25x.c and reimplements
its functionality using the new clock alias call.
Signed-off-by: NIan Molton <spyro@f2s.com>

This patch allows dynamic creation of clock aliases in order to
make it possible to have platform independent clock names for use in
device drivers.
Signed-off-by: NIan Molton <spyro@f2s.com>