- 03 12月, 2009 40 次提交
-
-
由 Zachary Amsden 提交于
They are globals, not clearly protected by any ordering or locking, and vulnerable to various startup races. Instead, for variable TSC machines, register the cpufreq notifier and get the TSC frequency directly from the cpufreq machinery. Not only is it always right, it is also perfectly accurate, as no error prone measurement is required. On such machines, when a new CPU online is brought online, it isn't clear what frequency it will start with, and it may not correspond to the reference, thus in hardware_enable we clear the cpu_tsc_khz variable to zero and make sure it is set before running on a VCPU. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jiri Slaby 提交于
Stanse found 2 lock imbalances in kvm_request_irq_source_id and kvm_free_irq_source_id. They omit to unlock kvm->irq_lock on fail paths. Fix that by adding unlock labels at the end of the functions and jump there from the fail paths. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch replaces them with native_read_tsc() which can also be used in expressions and saves a variable on the stack in this case. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
The exit_int_info field is only written by the hardware and never read. So it does not need to be copied on a vmrun emulation. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch reorganizes the logic in svm_interrupt_allowed to make it better to read. This is important because the logic is a lot more complicated with Nested SVM. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/x86/kvm/lapic.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
X86 CPUs need to have some magic happening to enable the virtualization extensions on them. This magic can result in unpleasant results for users, like blocking other VMMs from working (vmx) or using invalid TLB entries (svm). Currently KVM activates virtualization when the respective kernel module is loaded. This blocks us from autoloading KVM modules without breaking other VMMs. To circumvent this problem at least a bit, this patch introduces on demand activation of virtualization. This means, that instead virtualization is enabled on creation of the first virtual machine and disabled on destruction of the last one. So using this, KVM can be easily autoloaded, while keeping other hypervisors usable. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
nested_svm_map unnecessarily takes mmap_sem around gfn_to_page, since gfn_to_page / get_user_pages are responsible for it. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
- Change returned handle_invalid_guest_state() to return relevant exit codes - Move triggering the emulation from vmx_vcpu_run() to vmx_handle_exit() - Return to userspace instead of repeatedly trying to emulate instructions that have already failed Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Mohammed Gamal 提交于
This adds pusha and popa instructions (opcodes 0x60-0x61), this enables booting MINIX with invalid guest state emulation on. [marcelo: remove unused variable] Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
Add missing decoder flags for or instructions (0xc-0xd). Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Not the incorrect -EINVAL. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
The only thing it protects now is interrupt injection into lapic and this can work lockless. Even now with kvm->irq_lock in place access to lapic is not entirely serialized since vcpu access doesn't take kvm->irq_lock. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
The allows removal of irq_lock from the injection path. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Use RCU locking for mask/ack notifiers lists. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Mask irq notifier list is already there. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Maintain back mapping from irqchip/pin to gsi to speedup interrupt acknowledgment notifications. [avi: build fix on non-x86/ia64] Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Use gsi indexed array instead of scanning all entries on each interrupt injection. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
This removes assumptions that max GSIs is smaller than number of pins. Sharing is tracked on pin level not GSI level. [avi: no PIC on ia64] Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Also move call of ack notifiers after pic state change. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
They're just copies of vcpu->run, which is readily accessible. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
Introduces a new decode option "No64", which is used for instructions that are invalid in long mode. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Mohammed Gamal 提交于
[avi: avoid buffer overflow] Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Preemption notifiers will do that for us automatically. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Linus Torvalds 提交于
-
由 Julia Lawall 提交于
request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
-
由 Anisse Astier 提交于
These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: revert incorrect fix for read error handling in raid1.
-
由 Rusty Russell 提交于
Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164Reported-by: NAdam Williamson <awilliam@redhat.com> Cc: stable@kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: RB532: Fix devices.c compilation. MIPS: Fix MIPS I build.
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [PATCH] rc32434_wdt: fix compilation failure [WATCHDOG] rc32434_wdt.c: use resource_size()
-
由 Helge Deller 提交于
On the parisc architecture we face for each and every loaded kernel module this kernel "badness warning": sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text' Badness at fs/sysfs/dir.c:487 Reason for that is, that on parisc all kernel modules do have multiple .text sections due to the usage of the -ffunction-sections compiler flag which is needed to reach all jump targets on this platform. An objdump on such a kernel module gives: Sections: Idx Name Size VMA LMA File off Algn 0 .note.gnu.build-id 00000024 00000000 00000000 00000034 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 1 .text 00000000 00000000 00000000 00000058 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text.ac97_bus_match 0000001c 00000000 00000000 00000058 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 3 .text 00000000 00000000 00000000 000000d4 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE ... Since the .text sections are empty (size of 0 bytes) and won't be loaded by the kernel module loader anyway, I don't see a reason why such sections need to be listed under /sys/module/<module_name>/sections/<section_name> either. The attached patch does solve this issue by not exporting section names which are empty. This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703Signed-off-by: NHelge Deller <deller@gmx.de> CC: rusty@rustcorp.com.au CC: akpm@linux-foundation.org CC: James.Bottomley@HansenPartnership.com CC: roland@redhat.com CC: dave@hiauly1.hia.nrc.ca Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Initialise wm831x structure pointor for ISINK driver
-
由 Mark Brown 提交于
The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-