Commit 943ebae7 ("PCI: iproc: Add PAXC interface support") only allowed
device 0, which is a regression on BCMA-based platforms.

All systems support only one device, a Root Port at 00:00.0, on the root
bus.  PAXC-based systems support only the Root Port (00:00.0) and a single
device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc.
Non-PAXC systems support arbitrary devices below the Root Port.

[bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check]
Fixes: 943ebae7 ("PCI: iproc: Add PAXC interface support")
Reported-by: NRafal Milecki <zajec5@gmail.com>
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

For PCIe compliance, the PHY registers need setting as per the manual.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

If runtime PM is enabled in the kernel config, simply enable the clocks
once during probe.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

Drivers based on the DesignWare core can override the config read accessors
by supplying rd_own_conf() and rd_other_conf() function pointers.
dw_pcie_rd_conf() calls dw_pcie_rd_own_conf() (for accesses to the root
bus) or dw_pcie_rd_other_conf():

  dw_pcie_rd_conf
    dw_pcie_rd_own_conf                # if on root bus
    dw_pcie_rd_other_conf              # if not on root bus

Previously we checked for rd_other_conf() directly in dw_pcie_rd_conf(),
but we checked for rd_own_conf() in dw_pcie_rd_own_conf().

Check for rd_other_conf() in dw_pcie_rd_other_conf() to make this symmetric
with the rd_own_conf() checking, and similarly for the write path.

No functional change intended.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

The pci_sys_data struct was previously used by pci_common_init_dev() and by
the ARM pcibios_align_resource(), but recent commits removed those uses:

  cbce7900 ("PCI: designware: Make driver arch-agnostic")
  b3a72384 ("ARM/PCI: Replace pci_sys_data->align_resource with global function pointer")

cbce7900 removed the use of pci_common_init_dev() by DesignWare
drivers, including pcie-rcar.c, and b3a72384 removed the use of struct
pci_sys_data by the ARM pcibios_align_resource().

Remove struct pci_sys_data from pcie-rcar.c.

[bhelgaas: changelog]
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add support for the HiSilicon Hip06 SoC.  Documentation has been updated to
include Hip06.  Add Gabriele Paoloni as maintainer of the driver.
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>

Fix all whitespace issues (missing or needed whitespace) in all files in
drivers/pci.  Code is compiled with allyesconfig before and after code
changes and objects are recorded and checked with objdiff and they are not
changed after this commit.
Signed-off-by: NBogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Mark the dra7xx PCI host driver as broken.  This driver was first merged in
v3.17 and has never worked.  Although the driver compiles just fine, it is
missing an essential device reset.  If the driver is included, the kernel
locks up hard shortly after booting, before any console output appears.
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based
platforms.

The iProc PCIe MSI support deploys an event queue-based implementation.
Each event queue is serviced by a GIC interrupt and can support up to 64
MSI vectors.  Host memory is allocated for the event queues, and each event
queue consists of 64 word-sized entries.  MSI data is written to the lower
16-bit of each entry, whereas the upper 16-bit of the entry is reserved for
the controller for internal processing.

Each event queue is tracked by a head pointer and tail pointer.  Head
pointer indicates the next entry in the event queue to be processed by
the driver and is updated by the driver after processing is done.
The controller uses the tail pointer as the next MSI data insertion
point.  The controller ensures MSI data is flushed to host memory before
updating the tail pointer and then triggering the interrupt.

MSI IRQ affinity is supported by evenly distributing the interrupts to each
CPU core.  MSI vector is moved from one GIC interrupt to another in order
to steer to the target CPU.

Therefore, the actual number of supported MSI vectors is:

  M * 64 / N

where M denotes the number of GIC interrupts (event queues), and N denotes
the number of CPU cores.

This iProc event queue-based MSI support should not be used with newer
platforms with integrated MSI support in the GIC (e.g., giv2m or
gicv3-its).

[bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NVikram Prakash <vikramp@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>

On -RT and if kernel is booting with "threadirqs" cmd line parameter,
PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler())
will be forced threaded and, as result, will generate warnings like this:

  WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174()
  irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts
  Backtrace:
   (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40)
   (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174)
   (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8)
   (handle_irq_event) from (handle_simple_irq+0x90/0x118)
   (handle_simple_irq) from (generic_handle_irq+0x30/0x44)
   (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c)
   (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c)
   (irq_forced_thread_fn) from (irq_thread+0x128/0x204)

This happens because all of them invoke generic_handle_irq() from the
requested handler.  generic_handle_irq() grabs raw_locks and thus needs to
run in raw-IRQ context.

This issue was originally reproduced on TI dra7-evem, but, as was
identified during discussion [1], other hosts can also suffer from this
issue.  Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers
IRQF_NO_THREAD explicitly.

[1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com

[bhelgaas: add stable tag, fix typos]
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6)
CC: stable@vger.kernel.org
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Kukjin Kim <kgene@kernel.org>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Richard Zhu <Richard.Zhu@freescale.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Pratyush Anand <pratyush.anand@gmail.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Return values immediately when possible to simplify the control flow.

No functional change intended.  Folded in unused variable removal as
pointed out by Fabio Estevam <fabio.estevam@nxp.com>, Arnd Bergmann
<arnd@arndb.de>, and Thierry Reding <thierry.reding@gmail.com>.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

The PCIe driver reuses the Designware common code for host and MSI
initialization, and also programs the Qualcomm application specific
registers.

[bhelgaas: remove COMPILE_TEST Kconfig dependency]
Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Read back the ATU CR2 register to ensure ATU programming is effective
before any subsequent I/O or config space accesses.

Without this, PCI device enumeration is unreliable.

[bhelgaas: changelog, comment]
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NPratyush Anand <pratyush.anand@gmail.com>

Add fallback compatibility string for R-Car Gen 2 family.  This is in
keeping with the fallback scheme being adopted wherever appropriate for
drivers for Renesas SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add fallback compatibility string for R-Car Gen 2 family.  This is in
keeping with the fallback scheme being adopted wherever appropriate for
drivers for Renesas SoCs.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>

Add the "renesas,pcie-r8a7795" property for the R-Car H3 device to the
pcie-rcar driver.
Tested-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NHarunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>

Now that we can build on arm64, revert commit 7c537c67
("PCI: rcar: Build pcie-rcar.c only on ARM").
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The main purpose of this change is to avoid calling pci_ioremap_io() as
this is not available on arm64.  However, instead of doing the range
parsing in this driver we can utilise of_pci_get_host_bridge_resources().

This is similar to changes made to the generic PCI host driver in commit
dbf9826d ("PCI: generic: Convert to DT resource parsing API")
Reported-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

Traditionally, all iProc PCIe root complexes use PAXB-based wrapper, with
an integrated on-chip Serdes to support external endpoint devices.  On
newer iProc platforms, a PAXC-based wrapper is introduced, for connection
with internally emulated PCIe endpoint devices in the ASIC.

Add support for PAXC-based iProc PCIe root complex in the iProc PCIe core
driver.  This change factors out common logic between PAXB and PAXC, and
uses tables to store register offsets that are different between PAXB and
PAXC.  This allows the driver to be scaled to support subsequent PAXC
revisions in the future.
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>

For 32-bit config reads (size == 4), hisi_pcie_cfg_read() returned success
but never filled in the data we read.

Return the register data for 32-bit config reads.

Without this fix, PCI doesn't work at all because enumeration depends on
32-bit config reads.  The driver was tested internally, but got broken in
the process of upstreaming, so this fixes the breakage.

Fixes: 500a1d9a ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver")
Signed-off-by: NDongdong Liu <liudongdong3@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>

PCI interrupt lines start at 1, not at 0.  So, creates additional one
interrupt when register for irq domain.

Error when PCIe devices have 4 INTx:

  WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:280
    irq_domain_associate+0x17c/0x1cc()
  error: hwirq 0x4 is too large for dummy

Tested on Ethernet adapter card with multi-functions.
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Check TLP packet successful completion status.  This fix the issue when
accessing multi-function devices in enumeration process, TLP will return
error when accessing non-exist function number.  Returns PCI error code
instead of generic errno.

Tested on Ethernet adapter card with multi-functions.

[bhelgaas: simplify completion status checking code]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The Requester ID should use the Root Port devfn and it should be always 0.
Previously we constructed the Requester ID using the *Completer* devfn,
i.e., the devfn of the Function we expect to respond to the config access.
This causes issues when accessing configuration space for devices other
than the Root Port.

Build the Requester ID using the Root Port devfn.

Tested on Ethernet adapter card with multi-functions.
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

TLP_LOOP is 500 and the "loop" variable was a u8 so "loop < TLP_LOOP" is
always true.  We only need this condition to work if there is a problem so
it would have been easy to miss this in testing.

Make it a normal for loop with "int i" instead of over thinking things and
making it complicated.

Fixes: 6bb4dd154ae8 ("PCI: altera: Add Altera PCIe host controller driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLey Foon Tan <lftan@altera.com>

We previously used of_get_named_gpio(), which ignores the OF flags cell, so
the reset GPIO defaulted to "active high." This doesn't work on the Toradex
Apalis SoM with Ixora base board, which has an active-low reset GPIO.

Use devm_gpiod_get_optional() instead so we pay attention to the active
high/low flag.  This also adds support for GPIOs described via ACPI.

[bhelgaas: changelog]
Signed-off-by: NPetr Štetiar <ynezz@true.cz>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>

The "%pap" format adds a "0x" prefix, so using "0x%pap" results in output
of "0x0x...".  Drop the "0x" prefix in the format string.

[bhelgaas: changelog]
Signed-off-by: NDmitry V. Krivenok <krivenok.dmitry@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRay Jui <rjui@broadcom.com>

Commit b3a72384 ("ARM/PCI: Replace pci_sys_data->align_resource with
global function pointer") removed the struct pci_sys_data dependency from
the ARM pcibios functions that are part of the common ARM PCI arch
back-end, e.g., pcibios_align_resource(), so that struct pci_sys_data has
now become data that is only used internally by the ARM bios32 layer, i.e.,
pci_common_init_dev(), and by host controllers drivers callbacks, e.g.,
pci_sys_data.setup, that rely on the ARM bios32 API to probe.

PCI host controller drivers that do not rely on ARM bios32 calls to probe
do not need to have the pci_bus.sysdata pointer field pointing at a struct
pci_sys_data anymore, therefore it can be removed from the respective
drivers data structures.

Remove the pci_sys_data structures from the host controller drivers that do
not rely on ARM bios32 interface to scan the PCI bus, completing the
pci_sys_data clean-up and removing the related dependency on arch/arm
specific data.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
CC: Will Deacon <will.deacon@arm.com>
CC: Rob Herring <robh@kernel.org>

If the DTB specifies dma-ranges, use those values.  Otherwise, default to
the values that were previously hardcoded into the driver.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

We are in a context where we can sleep, and the PCIe reset gpio may be on
an I2C expander.  Use the cansleep() variant when setting the GPIO value.

Based on a patch from Russell King for pci-mvebu.c.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>

The hisi_pcie_probe() function is incorrectly marked as __init, as Kconfig
tells us:

  WARNING: drivers/pci/host/built-in.o(.data+0x7780): Section mismatch in reference from the variable hisi_pcie_driver to the function .init.text:hisi_pcie_probe()

If the probe for this device gets deferred past the point where __init
functions are removed, or the device is unbound and then reattached to the
driver, we branch into uninitialized memory, which is bad.

Remove the __init annotation from hisi_pcie_probe() and
hisi_add_pcie_port().

Fixes: 500a1d9a ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org>
Acked-by: NZhou Wang <wangzhou1@hisilicon.com>

PCIE_IPROC_BCMA does not require CONFIG_OF in Kconfig, but
CONFIG_PCIE_IPROC does, so we can get a warning when building for an ARM
platform without DT support:

  warning: (PCIE_IPROC_PLATFORM && PCIE_IPROC_BCMA) selects PCIE_IPROC which has unmet direct dependencies (PCI && OF && (ARM || ARM64))

It turns out that CONFIG_PCIE_IPROC never needs to be enabled by a user
anyway, we can simply rely on it being selected implictly through either
PCIE_IPROC_PLATFORM or PCIE_IPROC_BCMA.

Fixes: 4785ffbd ("PCI: iproc: Add BCMA PCIe driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>

"pp->io" is an I/O resource, e.g., "[io 0x0000-0xffff]"; "pp->io_base" is
the CPU physical address of a region where the host bridge converts CPU
memory accesses into PCI I/O transactions.

Corrupting pp->io_base by assigning pp->io->start to it breaks access to
the PCI I/O space, as reported by Kishon.

Remove the invalid assignment.

[bhelgaas: changelog]
Fixes: 0021d22b ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")
Reported-and-tested-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

Add Altera PCIe MSI driver.  This soft IP supports a configurable number of
vectors, which is a DTS parameter.

[bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace]
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NRob Herring <robh@kernel.org>

Add PCIe host support for HiSilicon SoC Hip05, related DT binding
documentation, and maintainer update.

[bhelgaas: changelog, 32-bit only config write warning text]
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NGabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Nliudongdong <liudongdong3@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)

Layerscape PCIe has its own MSI implementation.

Register ls_pcie_msi_host_init() to avoid using DesignWare's MSI.

[bhelgaas: add comment]
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have
similar PCIe implementation.  LUT is added to controller.

Add LS1043a and LS2080a support.

[bhelgaas: move unused field removal into separate patch, include DT update]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update)
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)

Removed unused node, dev, and bus fields from struct ls_pcie.

[bhelgaas: split into separate patch]
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Update the ls_add_pcie_port() signature to keep it consistent with the
other DesignWare-based host drivers.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

For the LS1021a PCIe controller, some status registers are located in SCFG,
unlike other Layerscape devices.

Move SCFG-related code to ls1021_pcie_host_init() and rename
ls_pcie_link_up() to ls1021_pcie_link_up() because LTSSM status is also in
SCFG.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Layerscape PCIe controller supports root complex (RC) and endpoint (EP)
modes, which can be set by RCW.

If not in RC mode, return -ENODEV without claiming the controller.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>