Use struct resource * also for iomem resources.

CC: linux-mtd@lists.infradead.org
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Page already had to be set to 0; Offset can easily be passed as
parameter to pcmcia_map_mem_page.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Introduce a new field into struct pcmcia_device named "resource" and of
type struct resource *, which contains the IO port ranges allocated for
this device. Memory window ranges and registration with the resource
trees will follow at a later date.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove some obsolete definitions from cs.h
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Use pcmcia_read_config_byte and pcmcia_write_config_byte instead
of pcmcia_access_configuration_register.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove cs_types.h which is no longer needed: Most definitions aren't
used at all, a few can be made away with, and two remaining definitions
(typedefs, unfortunatley) may be moved to more specific places.

CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

As we only provide one way to set up resources now, we can remove
the resource-setup-related bitfield (except resource_setup_done).
In addition, pcmcia_state only consisted of one entry, so remove
this bitfield as well.
Suggested-by: NKomuro <komurojun-mbn@nifty.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Split up the central event handler for 16bit cards into three individual
functions.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The event callback for handling 16bit PCMCIA cards only needs to be
informed about a few events. Furthermore, send_event may already
only be called with skt->skt_mutex held, which also protects against
the module being removed behind the callback's back.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".
Reported-and-tested-by: NMiroslav Šulc <fordfrog@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The kdb code should not toggle the sysrq state in case an end user
wants to try and resume the normal kernel execution.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Return the crtc_id, not the counter value.  They are not
necessarily the same.

Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The commit 1e8655f8
    drm/ttm: Fix build on architectures without AGP

looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h

Move the conditional inclusion of <asm/agp.h> *after* we have included
ttm_bo_driver.h
Signed-of-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389Tested-by: NJan Kreuzer <kontrollator@gmx.de>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We only add/remove crtcs at driver load, you cannot remove when
the GPU is running a CS packet since the fd is open, when
GPU hotplugging on radeons actually is needed all this locking
needs a review and I've started re-working kms core locking to deal
with this better. But for now avoid long delays in CS processing when
hotplug detect is happening in a different thread.

this fixes a regression introduced with hotplug detection.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pointed out by Lucas who found the new one in a comment in
setup_percpu.c. And then I fixed the others that I grepped
for.
Reported-by: NLucas <canolucas@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing
the irq.  The IRQ is now released in pcmcia_disable_device(), however
p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove().
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add the shrinkers missed in the first conversion of the API in
commit 7f8275d0 ("mm: add context argument to
shrinker callback").
Signed-off-by: NDave Chinner <dchinner@redhat.com>

The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c)
defines a key map for the matrix keypad keyboard. The hardware seems to
use all of the 8 rows and 8 columns of the keypad, although not all
possible locations are used.

The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys
are defined with a row and column number between 0 and 7, except

        KEY(0xff, 2, KEY_F9),
        KEY(0xff, 4, KEY_F10),
        KEY(0xff, 5, KEY_F11),

which represent keycodes that should be emitted when entire row is
connected to the ground.  since the driver handles this case as if we
had an extra column in the key matrix. Unfortunately we do not allocate
enough space and end up owerwriting some random memory.
Reported-and-tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Otherwise we won't see any events from the gamepad.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408Reported-and-tested-by: NEugene Yudin <eugene.yudin@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We moved input devices from 'struct gc' to individial pads (struct
gc-pad), but gc_nes_process_packet() was still trying to use old
ones and crashing.

Cc: stable@kernel.org
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reported-by: NAlexander Y. Fomichev <git.user@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Connector is actually DVI rather than HDMI.
Reported-by: NtrapDoor <trapdoor6@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My Collabora address is no longer enabled - update the MODULE_AUTHOR
fields of drivers to my current email address.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simply add a proper ID into the device table.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 5753c082 ("powerpc/85xx:
Kconfig cleanup"), there is no MPC85xx Kconfig symbol anymore, so the
driver became non-selectable.

This patch fixes the issue by switching to PPC_85xx symbol.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

this fixes a regression since the fbcon rework.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS,
which will break some setups.

This patch also removes the different ordering of shadow methods for
pre-nv50 chipsets.  The reason for the different ordering was paranoia,
but it should hopefully be OK to try shadowing PRAMIN first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a regression caused by b2ea4aa6
due to the way shared ddc with multiple digital connectors was handled.

You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D

HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital.  A shared DDC line with two
digital connectors is more complex.  You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters.  In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.

Reported-by: trapdoor6@gmail.com
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.
Signed-off-by: NKeith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code.  This gets copied to user
space.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If kzalloc() fails exit with -ENOMEM.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP.  The use
of the functions declared in it is already conditional.
Reported-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NDave Airlie <airlied@redhat.com>