1. 06 10月, 2012 14 次提交
  2. 21 9月, 2012 1 次提交
  3. 04 1月, 2012 1 次提交
  4. 01 11月, 2011 1 次提交
  5. 12 9月, 2011 1 次提交
  6. 19 1月, 2011 1 次提交
  7. 10 11月, 2010 1 次提交
    • C
      block: remove REQ_HARDBARRIER · 02e031cb
      Christoph Hellwig 提交于
      REQ_HARDBARRIER is dead now, so remove the leftovers.  What's left
      at this point is:
      
       - various checks inside the block layer.
       - sanity checks in bio based drivers.
       - now unused bio_empty_barrier helper.
       - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
         but Xen really needs to sort out it's barrier situaton.
       - setting of ordered tags in uas - dead code copied from old scsi
         drivers.
       - scsi different retry for barriers - it's dead and should have been
         removed when flushes were converted to FS requests.
       - blktrace handling of barriers - removed.  Someone who knows blktrace
         better should add support for REQ_FLUSH and REQ_FUA, though.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      02e031cb
  8. 09 11月, 2010 1 次提交
  9. 28 10月, 2010 2 次提交
  10. 15 10月, 2010 1 次提交
    • A
      llseek: automatically add .llseek fop · 6038f373
      Arnd Bergmann 提交于
      All file_operations should get a .llseek operation so we can make
      nonseekable_open the default for future file operations without a
      .llseek pointer.
      
      The three cases that we can automatically detect are no_llseek, seq_lseek
      and default_llseek. For cases where we can we can automatically prove that
      the file offset is always ignored, we use noop_llseek, which maintains
      the current behavior of not returning an error from a seek.
      
      New drivers should normally not use noop_llseek but instead use no_llseek
      and call nonseekable_open at open time.  Existing drivers can be converted
      to do the same when the maintainer knows for certain that no user code
      relies on calling seek on the device file.
      
      The generated code is often incorrectly indented and right now contains
      comments that clarify for each added line why a specific variant was
      chosen. In the version that gets submitted upstream, the comments will
      be gone and I will manually fix the indentation, because there does not
      seem to be a way to do that using coccinelle.
      
      Some amount of new code is currently sitting in linux-next that should get
      the same modifications, which I will do at the end of the merge window.
      
      Many thanks to Julia Lawall for helping me learn to write a semantic
      patch that does all this.
      
      ===== begin semantic patch =====
      // This adds an llseek= method to all file operations,
      // as a preparation for making no_llseek the default.
      //
      // The rules are
      // - use no_llseek explicitly if we do nonseekable_open
      // - use seq_lseek for sequential files
      // - use default_llseek if we know we access f_pos
      // - use noop_llseek if we know we don't access f_pos,
      //   but we still want to allow users to call lseek
      //
      @ open1 exists @
      identifier nested_open;
      @@
      nested_open(...)
      {
      <+...
      nonseekable_open(...)
      ...+>
      }
      
      @ open exists@
      identifier open_f;
      identifier i, f;
      identifier open1.nested_open;
      @@
      int open_f(struct inode *i, struct file *f)
      {
      <+...
      (
      nonseekable_open(...)
      |
      nested_open(...)
      )
      ...+>
      }
      
      @ read disable optional_qualifier exists @
      identifier read_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      expression E;
      identifier func;
      @@
      ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
      {
      <+...
      (
         *off = E
      |
         *off += E
      |
         func(..., off, ...)
      |
         E = *off
      )
      ...+>
      }
      
      @ read_no_fpos disable optional_qualifier exists @
      identifier read_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      @@
      ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
      {
      ... when != off
      }
      
      @ write @
      identifier write_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      expression E;
      identifier func;
      @@
      ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
      {
      <+...
      (
        *off = E
      |
        *off += E
      |
        func(..., off, ...)
      |
        E = *off
      )
      ...+>
      }
      
      @ write_no_fpos @
      identifier write_f;
      identifier f, p, s, off;
      type ssize_t, size_t, loff_t;
      @@
      ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
      {
      ... when != off
      }
      
      @ fops0 @
      identifier fops;
      @@
      struct file_operations fops = {
       ...
      };
      
      @ has_llseek depends on fops0 @
      identifier fops0.fops;
      identifier llseek_f;
      @@
      struct file_operations fops = {
      ...
       .llseek = llseek_f,
      ...
      };
      
      @ has_read depends on fops0 @
      identifier fops0.fops;
      identifier read_f;
      @@
      struct file_operations fops = {
      ...
       .read = read_f,
      ...
      };
      
      @ has_write depends on fops0 @
      identifier fops0.fops;
      identifier write_f;
      @@
      struct file_operations fops = {
      ...
       .write = write_f,
      ...
      };
      
      @ has_open depends on fops0 @
      identifier fops0.fops;
      identifier open_f;
      @@
      struct file_operations fops = {
      ...
       .open = open_f,
      ...
      };
      
      // use no_llseek if we call nonseekable_open
      ////////////////////////////////////////////
      @ nonseekable1 depends on !has_llseek && has_open @
      identifier fops0.fops;
      identifier nso ~= "nonseekable_open";
      @@
      struct file_operations fops = {
      ...  .open = nso, ...
      +.llseek = no_llseek, /* nonseekable */
      };
      
      @ nonseekable2 depends on !has_llseek @
      identifier fops0.fops;
      identifier open.open_f;
      @@
      struct file_operations fops = {
      ...  .open = open_f, ...
      +.llseek = no_llseek, /* open uses nonseekable */
      };
      
      // use seq_lseek for sequential files
      /////////////////////////////////////
      @ seq depends on !has_llseek @
      identifier fops0.fops;
      identifier sr ~= "seq_read";
      @@
      struct file_operations fops = {
      ...  .read = sr, ...
      +.llseek = seq_lseek, /* we have seq_read */
      };
      
      // use default_llseek if there is a readdir
      ///////////////////////////////////////////
      @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier readdir_e;
      @@
      // any other fop is used that changes pos
      struct file_operations fops = {
      ... .readdir = readdir_e, ...
      +.llseek = default_llseek, /* readdir is present */
      };
      
      // use default_llseek if at least one of read/write touches f_pos
      /////////////////////////////////////////////////////////////////
      @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read.read_f;
      @@
      // read fops use offset
      struct file_operations fops = {
      ... .read = read_f, ...
      +.llseek = default_llseek, /* read accesses f_pos */
      };
      
      @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier write.write_f;
      @@
      // write fops use offset
      struct file_operations fops = {
      ... .write = write_f, ...
      +	.llseek = default_llseek, /* write accesses f_pos */
      };
      
      // Use noop_llseek if neither read nor write accesses f_pos
      ///////////////////////////////////////////////////////////
      
      @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read_no_fpos.read_f;
      identifier write_no_fpos.write_f;
      @@
      // write fops use offset
      struct file_operations fops = {
      ...
       .write = write_f,
       .read = read_f,
      ...
      +.llseek = noop_llseek, /* read and write both use no f_pos */
      };
      
      @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier write_no_fpos.write_f;
      @@
      struct file_operations fops = {
      ... .write = write_f, ...
      +.llseek = noop_llseek, /* write uses no f_pos */
      };
      
      @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      identifier read_no_fpos.read_f;
      @@
      struct file_operations fops = {
      ... .read = read_f, ...
      +.llseek = noop_llseek, /* read uses no f_pos */
      };
      
      @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
      identifier fops0.fops;
      @@
      struct file_operations fops = {
      ...
      +.llseek = noop_llseek, /* no read or write fn */
      };
      ===== End semantic patch =====
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Cc: Julia Lawall <julia@diku.dk>
      Cc: Christoph Hellwig <hch@infradead.org>
      6038f373
  11. 05 10月, 2010 1 次提交
    • A
      block: autoconvert trivial BKL users to private mutex · 2a48fc0a
      Arnd Bergmann 提交于
      The block device drivers have all gained new lock_kernel
      calls from a recent pushdown, and some of the drivers
      were already using the BKL before.
      
      This turns the BKL into a set of per-driver mutexes.
      Still need to check whether this is safe to do.
      
      file=$1
      name=$2
      if grep -q lock_kernel ${file} ; then
          if grep -q 'include.*linux.mutex.h' ${file} ; then
                  sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
          else
                  sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
          fi
          sed -i ${file} \
              -e "/^#include.*linux.mutex.h/,$ {
                      1,/^\(static\|int\|long\)/ {
                           /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
      
      } }"  \
          -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
          -e '/[      ]*cycle_kernel_lock();/d'
      else
          sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                      -e '/cycle_kernel_lock()/d'
      fi
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      2a48fc0a
  12. 08 8月, 2010 2 次提交
    • A
      block: push down BKL into .open and .release · 6e9624b8
      Arnd Bergmann 提交于
      The open and release block_device_operations are currently
      called with the BKL held. In order to change that, we must
      first make sure that all drivers that currently rely
      on this have no regressions.
      
      This blindly pushes the BKL into all .open and .release
      operations for all block drivers to prepare for the
      next step. The drivers can subsequently replace the BKL
      with their own locks or remove it completely when it can
      be shown that it is not needed.
      
      The functions blkdev_get and blkdev_put are the only
      remaining users of the big kernel lock in the block
      layer, besides a few uses in the ioctl code, none
      of which need to serialize with blkdev_{get,put}.
      
      Most of these two functions is also under the protection
      of bdev->bd_mutex, including the actual calls to
      ->open and ->release, and the common code does not
      access any global data structures that need the BKL.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Acked-by: NChristoph Hellwig <hch@infradead.org>
      Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      6e9624b8
    • C
      block: unify flags for struct bio and struct request · 7b6d91da
      Christoph Hellwig 提交于
      Remove the current bio flags and reuse the request flags for the bio, too.
      This allows to more easily trace the type of I/O from the filesystem
      down to the block driver.  There were two flags in the bio that were
      missing in the requests:  BIO_RW_UNPLUG and BIO_RW_AHEAD.  Also I've
      renamed two request flags that had a superflous RW in them.
      
      Note that the flags are in bio.h despite having the REQ_ name - as
      blkdev.h includes bio.h that is the only way to go for now.
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      7b6d91da
  13. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo 提交于
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  14. 22 12月, 2009 1 次提交
  15. 02 12月, 2009 1 次提交
  16. 22 9月, 2009 1 次提交
  17. 20 9月, 2009 1 次提交
  18. 14 9月, 2009 1 次提交
    • E
      aoe: end barrier bios with EOPNOTSUPP · 18d8217b
      Ed Cashin 提交于
      BugLink: http://bugzilla.kernel.org/show_bug.cgi?id=13942
      
      Bruno Premont noticed that aoe throws a BUG during umount of an XFS in
      2.6.31:
      
      [ 5259.349897] aoe: bi_io_vec is NULL
      [ 5259.349940] ------------[ cut here ]------------
      [ 5259.349958] kernel BUG at /usr/src/linux-2.6/drivers/block/aoe/aoeblk.c:177!
      [ 5259.349990] invalid opcode: 0000 [#1]
      
      The bio in question is a barrier.  Jens Axboe suggested that such bios
      need to be recognized and ended with -EOPNOTSUPP by any driver that
      provides its own ->make_request_fn handler and does not handle
      barriers.
      
      In testing the changes below eliminate the BUG.
      
      (Better would be real barrier support, something that Ed says he'll add
      for later in the .32 cycle. For now, this at least gets rid of a bug
      with crashing on an empty barrier. Jens)
      Signed-off-by: NEd L. Cashin <ecashin@coraid.com>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      18d8217b
  19. 11 9月, 2009 1 次提交
  20. 09 9月, 2009 1 次提交
    • E
      aoe: allocate unused request_queue for sysfs · 7135a71b
      Ed Cashin 提交于
      Andy Whitcroft reported an oops in aoe triggered by use of an
      incorrectly initialised request_queue object:
      
        [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add
      		an uninitialized object, something is seriously wrong.
        [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
        [ 2645.959107] Call Trace:
        [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70
        [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
        [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160
        [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]
      
      The request queue of an aoe device is not used but can be allocated in
      code that does not sleep.
      
      Bruno bisected this regression down to
      
        cd43e26f
      
        block: Expose stacked device queues in sysfs
      
      "This seems to generate /sys/block/$device/queue and its contents for
       everyone who is using queues, not just for those queues that have a
       non-NULL queue->request_fn."
      
      Addresses http://bugs.launchpad.net/bugs/410198
      Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942
      
      Note that embedding a queue inside another object has always been
      an illegal construct, since the queues are reference counted and
      must persist until the last reference is dropped. So aoe was
      always buggy in this respect (Jens).
      Signed-off-by: NEd Cashin <ecashin@coraid.com>
      Cc: Andy Whitcroft <apw@canonical.com>
      Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
      Cc: Bruno Premont <bonbons@linux-vserver.org>
      Cc: Martin K. Petersen <martin.petersen@oracle.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      7135a71b
  21. 16 6月, 2009 1 次提交
  22. 28 5月, 2009 1 次提交
  23. 02 4月, 2009 1 次提交
  24. 10 3月, 2009 1 次提交
  25. 04 3月, 2009 1 次提交