- 31 3月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
-
- 18 11月, 2013 1 次提交
-
-
由 Jean Delvare 提交于
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: NJean Delvare <jdelvare@suse.de> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
-
- 18 5月, 2013 1 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 09 5月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 01 3月, 2013 3 次提交
-
-
由 Gabor Juhos 提交于
Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Gabor Juhos 提交于
The ath79_wdt driver uses a fixed memory address currently. Although this is working with each currently supported SoCs, but this may change in the future. Additionally, the driver includes platform specific header files in order to be able to get the memory base of the watchdog device. The patch adds a memory resource to the platform device, and converts the driver to get the base address of the watchdog device from that. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Gabor Juhos 提交于
Use the managed version of clk_get. This allows to simplify the probe/remove functions a bit. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 20 12月, 2012 1 次提交
-
-
由 Gabor Juhos 提交于
This makes the code a bit smaller by getting rid of some boilerplate code. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 11月, 2012 3 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 3月, 2012 2 次提交
-
-
由 Wim Van Sebroeck 提交于
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Joe Perches 提交于
Use the current logging styles. Make sure all output has a prefix. Add missing newlines. Remove now unnecessary PFX, NAME, and miscellaneous other #defines. Coalesce formats. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 06 1月, 2012 1 次提交
-
-
由 Gabor Juhos 提交于
The watchdog register writes required to have a flush in order to commit the values to the register. Without the flush, the driver not function correctly on AR934X SoCs. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Acked-by: NLuis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 12 1月, 2011 1 次提交
-
-
由 Gabor Juhos 提交于
This patch adds a driver for the built-in hardware watchdog device of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-