bapm enabled the GPU and CPU to share TDP headroom.  It was
disabled by default since some laptops hung when it was enabled
in conjunction with dpm.  It seems to be stable on desktop
boards and fixes hangs on boot with dpm enabled on certain
boards, so enable it by default on desktop boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72921Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm allows the GPU and CPU to share TDP.  This allows
for additional performance out of the GPU and CPU when
the headroom is available.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics shouldn't need any manual adjustment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the default to 600Mhz if it's not set in the bios,
and bump the default to 600Mhz if it's lower than that.

This fixes display issues with certain 4k DP monitors when
using 5.4 Ghz DP clocks.

v2: fix typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For MIPI, DSI PLL is configured separately in vlv_configure_dsi_pll
during the DSI enable sequence

Causing WARN dump otherwise in dpio_reads

v2: Add IS_CHERRYVIEW check as suggested by Ville
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If user uses wrong ioctl command with _IOC_NONE and argument size
greater than 0, it can cause NULL pointer access from memset of line
463. If _IOC_NONE, don't memset to 0 for kdata.
Signed-off-by: NZhaowei Yuan <zhaowei.yuan@samsung.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mixer_wait_for_vblank function expects that the upcoming
vsync interrupt handler routine will clear the
wait_vsync_event atomic variable.

For this to happen, interrupts should be enabled and
disabled properly.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Mixer soft reset is a recommended step before reconfiguring
the mixer after power on. Mixer looses the previous state of
DMAs if soft reset. This is the recommendation from the
hardware team.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Allowing only one layer update per vsync can cause issues
while there are update available for both layers. There is
a good amount of possibility to loose updates if we allow
single update per vsync.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes an issue whereby we may race with the table updates (before the
core takes the struct_mutex) and so risk dereferencing a stale pointer in
the iterator for /debugfs/.../i915_gem_objects. For example,

[ 1524.757545] BUG: unable to handle kernel paging request at f53af748
[ 1524.757572] IP: [<c1406982>] per_file_stats+0x12/0x100
[ 1524.757599] *pdpt = 0000000001b13001 *pde = 00000000379fb067 *pte = 80000000353af060
[ 1524.757621] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1524.757637] Modules linked in: ctr ccm arc4 ath9k ath9k_common ath9k_hw ath snd_hda_codec_conexant mac80211 snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec bnep snd_hwdep rfcomm snd_pcm gpio_ich dell_wmi sparse_keymap snd_seq_midi hid_multitouch uvcvideo snd_seq_midi_event dell_laptop snd_rawmidi dcdbas snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev snd_seq_device coretemp snd_timer hid joydev kvm_intel cfg80211 ath3k kvm btusb bluetooth serio_raw snd microcode soundcore lpc_ich wmi mac_hid parport_pc ppdev lp parport psmouse ahci libahci
[ 1524.757825] CPU: 3 PID: 1911 Comm: intel-gpu-overl Tainted: G        W  OE 3.15.0-rc3+ #96
[ 1524.757840] Hardware name: Dell Inc. Inspiron 1090/Inspiron 1090, BIOS A06 08/23/2011
[ 1524.757855] task: f52f36c0 ti: f4cbc000 task.ti: f4cbc000
[ 1524.757869] EIP: 0060:[<c1406982>] EFLAGS: 00210202 CPU: 3
[ 1524.757884] EIP is at per_file_stats+0x12/0x100
[ 1524.757896] EAX: 0000002d EBX: 00000000 ECX: f4cbdefc EDX: f53af700
[ 1524.757909] ESI: c1406970 EDI: f53af700 EBP: f4cbde6c ESP: f4cbde5c
[ 1524.757922]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1524.757934] CR0: 80050033 CR2: f53af748 CR3: 356af000 CR4: 000007f0
[ 1524.757945] Stack:
[ 1524.757957]  f4cbdefc 00000000 c1406970 f53af700 f4cbdea8 c12e5f15 f4cbdefc c1406970
[ 1524.757993]  0000ffff f4cbde90 0000002d f5dc5cd0 e4e80438 c1181d59 f4cbded8 f4d89900
[ 1524.758027]  f5631b40 e5131074 c1903f37 f4cbdf28 c14068e6 f52648a0 c1927748 c1903f37
[ 1524.758062] Call Trace:
[ 1524.758084]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758106]  [<c12e5f15>] idr_for_each+0xa5/0x100
[ 1524.758126]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758148]  [<c1181d59>] ? seq_vprintf+0x29/0x50
[ 1524.758168]  [<c14068e6>] i915_gem_object_info+0x486/0x510
[ 1524.758189]  [<c11823a6>] seq_read+0xd6/0x380
[ 1524.758208]  [<c116d11d>] ? final_putname+0x1d/0x40
[ 1524.758227]  [<c11822d0>] ? seq_hlist_next_percpu+0x90/0x90
[ 1524.758246]  [<c1163e52>] vfs_read+0x82/0x150
[ 1524.758265]  [<c11645d6>] SyS_read+0x46/0x90
[ 1524.758285]  [<c16b8d8c>] sysenter_do_call+0x12/0x22
[ 1524.758298] Code: f5 8f 2a 00 83 c4 6c 31 c0 5b 5e 5f 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 04 3e 8d 74 26 00 83 41 04 01 <8b> 42 48 01 41 08 8b 42 4c 89 d7 85 c0 75 07 8b 42 60 85 c0 74
[ 1524.758461] EIP: [<c1406982>] per_file_stats+0x12/0x100 SS:ESP 0068:f4cbde5c
[ 1524.758485] CR2: 00000000f53af748
Reported-by: NSam Jansen <sam.jansen@starleaf.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Jansen <sam.jansen@starleaf.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fallout from

commit 46470fc9
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Wed May 21 19:01:06 2014 +0300

    drm/i915: Add null state batch to active list

undid the earlier fix of only marking the ctx as initialised after it is
saved by the hardware during a SET_CONTEXT operation:

commit ad1d2199
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Sat Dec 28 13:31:49 2013 -0800

    drm/i915: set ctx->initialized only after RCS
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[Jani: add reference to the earlier fix in the commit messsage.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Mixer should be power gated only after it is gracefully stopped.
The recommended sequence is to Stop the mixer and wait till
it enters to IDLE state before gating the clocks and power to
the mixer.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Power state variable holds the state of the mixer device.
Power on and power off functions are toggling these variable
at wrong place.

State variable should be changed to true only after Runtime
PM and clocks are enabled. Else it may result to a situation
where mixer registers are accessed with device power enabled.
Similar logic for poweroff sequence.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch disables non-enabled HW windows on applying
configuration, it will allow to clear windows enabled
by bootloader.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

'exynos_drm_pdev' was not getting unregistered if platform_driver_register()
failed. Fix the ordering to allow this. This also fixes the below warning by
moving the #endif macro. While at it also fix the ordering in the exit function
so that de-registration happens in opposite order of registration.
drivers/gpu/drm/exynos/exynos_drm_drv.c:768:1: warning: label
'err_unregister_pd' defined but not used [-Wunused-label]
Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

We recently changed this function to return a pointer instead of an int
so we need to change this zero to a NULL or Sparse complains:

	drivers/gpu/drm/exynos/exynos_drm_drv.h:346:47:
	warning: Using plain integer as NULL pointer
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

If there is no panel node in DT and instead display timings are provided
directly in FIMD node, there is no panel object created and ctx->panel
becomes NULL. However during Exynos DRM initialization
drm_helper_hpd_irq_event() is called, which in turns calls
exynos_dpi_detect(), which dereferences ctx->panel without a check,
causing a NULL pointer derefrence.

This patch fixes the issue by adding necessary NULL pointer check.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch resolves page fault issue of Mixer when disabled.

The SFRs of VP and Mixer are updated by Vertical Sync of Timing
generator which is a part of HDMI so the sequence to disable TV
Subsystem should be as following:
	VP -> Mixer -> HDMI

For this, this patch disables Mixer and VP (if used) prior to
disabling HDMI.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Apparently there are Apple laptops with magic smoke for a VBIOS, which
we fail to find and use. Default to having and setting up backlight in
this case.

This fixes a regression introduced by
commit c675949e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 9 11:31:37 2014 +0300

    drm/i915: do not setup backlight if not available according to VBT

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77831Reported-and-tested-by: NMatteo Cypriani <mcy@lm7.fr>
Cc: stable@vger.kernel.org # 3.15+
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Jesse noticed that the punit communication needed to query the VLV power
well status can cause substantial delays. Since we can query the state
frequently, for example during I2C transfers, maintain a cached version
of the HW state to get rid of this delay.

This fixes at least one reported regression where boot time increased by
~4 seconds due to frequent power well state queries on VLV during eDP
EDID read.

This regression has been introduced in

commit bb4932c4
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Apr 14 20:24:33 2014 +0300

    drm/i915: vlv: check port power domain instead of only D0 for eDP VDD on
Reported-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If probe fails after IOMMU is attached, we need to detach in order to
clean up properly.  Before this change, IOMMU faults would occur if the
probe failed (-EPROBE_DEFER).
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

use mm.h definition

Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The clock driver usually complains when a clock is being prepared
before setting its rate. It is the case here for "core_clk" which
needs to be set at 19.2 MHz before we attempt a prepare_enable().
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRob Clark <robdclark@gmail.com>

This patch helps to avoid the following build issue:

drivers/gpu/drm/msm/msm_fbdev.c:108:2: error: passing argument 3 of 'msm_gem_get_iova_locked' from incompatible pointer type [-Werror]
   msm_gem_get_iova_locked(fbdev->bo, 0, &paddr);
   ^
In file included from drivers/gpu/drm/msm/msm_fbdev.c:18:0:
drivers/gpu/drm/msm/msm_drv.h:153:5: note: expected 'uint32_t *' but argument is of type 'dma_addr_t *'
  int msm_gem_get_iova_locked(struct drm_gem_object *obj, int id,
      ^
Signed-off-by: NMatwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NDmitry Torokhov <dtor@vmware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

W1 reset_bus() should return zero if slave device is present.
This patch fix this issue.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If connector->dpms is left untouched, it defaults
to DRM_MODE_DPMS_ON (0).

As a result, drm_helper_connector_dpms will exit when
it will be asked to set the state to DRM_MODE_DPMS_ON,
because it is already set.

That issue prevented displays from turning on at boot.
Signed-off-by: NDenis Carikli <denis@eukrea.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tdev->dev has been freed in device_destroy(), it's not right to
use dev_set_drvdata() after that;
Signed-off-by: NYi Zhang <yizhang@marvell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The direct cause is IRQ_SPI is already defined as a macro in unicore32
architecture (also, blackfin and mips architectures define it). The
related error (unicore32  with allmodconfig)

    CC [M]  drivers/scsi/mvsas/mv_94xx.o
  In file included from drivers/scsi/mvsas/mv_94xx.c:27:
  drivers/scsi/mvsas/mv_94xx.h:176: error: expected identifier before numeric constant

And IRQ_SAS_A and IRQ_SAS_B are used as 'u32' (although "enum
pci_interrupt_cause" is not used directly, now).

All together, need add 'MVS_' for "enum pci_interrupt_cause".
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NXuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: NXuetao Guan <gxt@mprc.pku.edu.cn>

It is only a typo issue, the related commit:

  "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (for unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm':
  drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev'
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NXuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: NXuetao Guan <gxt@mprc.pku.edu.cn>

It is only a typo issue, the related commit:

  "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()"

The related error (unicore32 with allmodconfig):

    CC [M]  drivers/rtc/rtc-puv3.o
  drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie':
  drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug'
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Acked-by: NXuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: NXuetao Guan <gxt@mprc.pku.edu.cn>

In the conversion to generic early console, the passing of options from
the early 8250 console to the regular ttyS console was broken. This
resulted in the baud rate changing when switching consoles during boot.

This feature allows specifying a single console option on the kernel
command line rather than both an early console and regular serial tty
console. It would be nice to generalize this feature. However, it only
works if the correct baud rate can be probed early which is not the
case on many platforms which have non-standard UART clock rates. So for
now, this is left as an 8250 specific feature.
Reported-and-tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If INPCK is not set, input parity detection should be disabled. This means
parity errors should not be received from the tty driver, and the data
received should be treated normally.

SUS v3, 11.2.2, General Terminal Interface - Input Modes, states:
  "If INPCK is set, input parity checking shall be enabled. If INPCK is
   not set, input parity checking shall be disabled, allowing output parity
   generation without input parity errors. Note that whether input parity
   checking is enabled or disabled is independent of whether parity detection
   is enabled or disabled (see Control Modes). If parity detection is enabled
   but input parity checking is disabled, the hardware to which the terminal
   is connected shall recognize the parity bit, but the terminal special file
   shall not check whether or not this bit is correctly set."

Ignore parity errors reported by the tty driver when INPCK is not set, and
handle the received data normally.

Fixes: Bugzilla #71681, 'Improvement of n_tty_receive_parity_error from n_tty.c'
Reported-by: NIvan <athlon_@mail.ru>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.

SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
  "If IGNBRK is set, a break condition detected on input shall be ignored;
   that is, not put on the input queue and therefore not read by any
   process."

Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.

Affected drivers:
8250 - all
serial_txx9
mfd
amba-pl010
amba-pl011
atmel_serial
bfin_uart
dz
ip22zilog
max310x
mxs-auart
netx-serial
pnx8xxx_uart
pxa
sb1250-duart
sccnxp
serial_ks8695
sirfsoc_uart
st-asc
vr41xx_siu
zs
sunzilog
fsl_lpuart
sunsab
ucc_uart
bcm63xx_uart
sunsu
efm32-uart
pmac_zilog
mpsc
msm_serial
m32r_sio

Unaffected drivers:
omap-serial
rp2
sa1100
imx
icom

Annotated for fixes:
altera_uart
mcf

Drivers without break detection:
21285
xilinx-uartps
altera_jtaguart
apbuart
arc-uart
clps711x
max3100
uartlite
msm_serial_hs
nwpserial
lantiq
vt8500_serial

Unknown:
samsung
mpc52xx_uart
bfin_sport_uart
cpm_uart/core

Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag'
Reported-by: NIvan <athlon_@mail.ru>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The acquire ctx will typically be declared on the stack, which means we
could have garbage values for any uninitialized field.  In this case, it
was triggering WARN_ON()s because 'contended' had garbage value.

Go ahead and use memset() to be more future-proof.

v2: now with extra brown paper bag
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

With commit aed3f9d4 ("staging: comedi: addi_apci_1564:
absorb apci1564_reset()"), the apci 1564 driver has gained
a dependency on the addi watchdog module, which is not reflected
correctly in Kconfig, and that can lead to link errors
when the watchdog is disabled.

This adds an explicit 'select', like it is done in the other
addi apci drivers that need it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a regression in 3.16-rc1 compared to 3.15.

The unbalanced calls would presumably result in the page flip interrupts
never getting disabled once they are enabled.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 75f36d86.

drm_vblank_get() is necessary to ensure the DRM vblank counter value is
up to date in drm_send_vblank_event().

Seems to fix weston hangs waiting for page flips to complete.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure we have an HDMI monitor before validating modes with
clocks >165 Mhz on single link connections.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>