- 27 12月, 2013 28 次提交
-
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
It's possible for VMs with older versions of bnx2x to run over a hypervisor with latest driver. If a VF in such a VM does not support RSS configuration, the PF driver in the hypervisor will print an error message to system logs. This changes the error message into a debug message, as this is very likely a false alarm for an older VF (i.e., VF manages to work properly; PF simply cannot configure the additional queues for it). Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
There's a known issue that using `ethtool -e' flips the endianity of the written data, i.e., using `ethtool -E' to dump eeprom image and than using `ethtool -e' to re-write that same image will result in an image where the data has the opposite endianity. Sadly, this cannot be fixed as there are already various tools deployed based on the endianity of the eeprom read/write. Instead, a comment is added to the code to help explain why this is un-fixable. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This function adds several OS calls required to fully enable PCIe AER support - pci_enable_pcie_error_reporting() and pci_cleanup_aer_uncorrect_error_status(). Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds the ability for bnx2x to load after UNDI is used in the preboot environment on a multi-function interface which is not the first interface of a given device. Notice a side-effect is that the order by which the functions are probed and thus interfaces appear might change, as this patch utilizes the EPROBE_DEFER return value (and mechanism). Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ding Tianhong says: ==================== slight optimization of addr compare for some modules Joe Perches add ether_addr_equal_unaligned to test if possibly unaligned to u16 Ethernet addresses are equal. If CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, this uses the slightly faster generic routine ether_addr_equal, otherwise this uses memcmp. So I use the recently added and possibly more efficient ether_addr_equal_unaligned to instead of memcmp for slight optimization. v2: Because a lot of places are already using 16b aligned MAC address for both operands, so use the ether_addr_equal to instead of ether_addr_equal_unaligned.Thanks for Joe, Alex and Antonio's opinions. Also remove the patch for bridge. v3: According Joe's suggestion, the patch (net: slight optimization of addr compare for some modules) should be broken into several patches, and it will be good to review for maintainers. So I will send rest of the patches for first step, and next step, I will seperate the netdev patch and send them by another patchset for net-next. also fix some changelog. v3.5 Change some style for patch 8 and patch 13. Thanks for Sergei's suggestion. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal or ether_addr_equal_unaligned instead of memcmp. Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal_unaligned instead of memcmp. Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Bing Zhao <bzhao@marvell.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Solomon Peachy <pizza@shaftnet.org> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Jouni Malinen <j@w1.fi> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: linux-media@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: David Miller <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use the possibly more efficient ether_addr_equal to instead of memcmp. Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Faisal Latif <faisal.latif@intel.com> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Rupesh Gujare <rupesh.gujare@atmel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
It is better to use batadv_compate_eth instead of memcpy for concise style. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Acked-by: NAntonio Quartulli <antonio@meshcoding.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Michal Ostrowski <mostrows@earthlink.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Joerg Reuter <jreuter@yaina.de> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use the recently added and possibly more efficient ether_addr_equal_unaligned to instead of memcmp. Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Don Fry <pcnet32@frontier.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 dingtianhong 提交于
The function did not be used any more, so remove it. Cc: Li Yang <leoli@freescale.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Use it or lose it. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This module shouldn't be randomly exporting symbols Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2013 8 次提交
-
-
由 Weilong Chen 提交于
This patch add spaces to cleanup checkpatch errors. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wangweidong 提交于
In switch() had do return, and never use the 'return NULL'. The 'break' after return or goto has no effect. Remove it. v2: make it more readable as suggested by Neil. Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weilong Chen 提交于
This patch fixes checkpath.pl: WARNING: Prefer pr_warn(... to pr_warning(... #447: FILE: ./wpan.c:447: Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Cleanup by making local functions static. The code to load config file is unreachable in net-next, probably came from some out of tree driver. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wangweidong 提交于
remove the unnecessary cast. Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Need to be able to see changes to proxy NDP status on a per interface basis via netlink (analog to proxy_arp). Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Use same field for both IPv4 (proxy_arp) and IPv6 (proxy_ndp) so fix it before API is set to be a common name Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
When adding a new vxlan device to an "underlying carrier" (here: dst->remote_ifindex), the MTU size assigned to the vxlan device is the MTU at setup time of the carrier - needed headroom, when adding a vxlan device w/o explicit carrier, then it defaults to 1500. In case of an explicit carrier that supports jumbo frames, we currently cannot change vxlan MTU via ip(8) to > 1500 in post-setup time, as vxlan driver uses eth_change_mtu() as default method for manually setting MTU. Hence, use a custom implementation that only falls back to eth_change_mtu() in case we didn't use a dev parameter on device setup time, and otherwise allow a max MTU setting of the carrier incl. adjustment for headroom. Reported-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 12月, 2013 4 次提交
-
-
由 Eric Dumazet 提交于
We can use kfree_skb_list() instead of open coding it. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can-next由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== this is a pull request of three patches for net-next/master. There is a patch by Oliver Hartkopp, to clean up the CAN gw code. Alexander Shiyan adds device tree support to the mcp251x driver and a patch by Ezequiel Garcia lets the ti_hecc driver compile on all ARM platforms. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
In commit 93b36cf3 ("ipv6: support IPV6_PMTU_INTERFACE on sockets") I made a horrible mistake to add ip6_sk_accept_pmtu to the generic sctp_icmp_frag_needed path. This results in build warnings if IPv6 is disabled which were luckily caught by Fengguang's kbuild bot. But it also leads to a kernel panic IPv4 frag-needed packet is received. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit ac0917f2. Better version of this fix forthcoming. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-