- 25 11月, 2017 1 次提交
-
-
由 Nadav Amit 提交于
Refactor the write to CR4 and its shadow value. This is done in preparation for the addition of an assertion to check that IRQs are disabled during CR4 update. No functional change. Signed-off-by: NNadav Amit <namit@vmware.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: nadav.amit@gmail.com Cc: Andy Lutomirski <luto@kernel.org> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20171125032907.2241-2-namit@vmware.com
-
- 24 11月, 2017 4 次提交
-
-
由 Masami Hiramatsu 提交于
The kbuild test robot reported this build warning: Warning: arch/x86/tools/test_get_len found difference at <jump_table>:ffffffff8103dd2c Warning: ffffffff8103dd82: f6 09 d8 testb $0xd8,(%rcx) Warning: objdump says 3 bytes, but insn_get_length() says 2 Warning: decoded and checked 1569014 instructions with 1 warnings This sequence seems to be a new instruction not in the opcode map in the Intel SDM. The instruction sequence is "F6 09 d8", means Group3(F6), MOD(00)REG(001)RM(001), and 0xd8. Intel SDM vol2 A.4 Table A-6 said the table index in the group is "Encoding of Bits 5,4,3 of the ModR/M Byte (bits 2,1,0 in parenthesis)" In that table, opcodes listed by the index REG bits as: 000 001 010 011 100 101 110 111 TEST Ib/Iz,(undefined),NOT,NEG,MUL AL/rAX,IMUL AL/rAX,DIV AL/rAX,IDIV AL/rAX So, it seems TEST Ib is assigned to 001. Add the new pattern. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Bjorn Helgaas 提交于
There are no in-tree callers of ht_create_irq(), the driver interface for HyperTransport interrupts, left. Remove the unused entry point and all the supporting code. See 8b955b0d ("[PATCH] Initial generic hypertransport interrupt support"). Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-pci@vger.kernel.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com
-
由 Borislav Petkov 提交于
In order to save on redundant structs definitions insn_get_code_seg_params() was made to return two 4-bit values in a char but clang complains: arch/x86/lib/insn-eval.c:780:10: warning: implicit conversion from 'int' to 'char' changes value from 132 to -124 [-Wconstant-conversion] return INSN_CODE_SEG_PARAMS(4, 8); ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~ ./arch/x86/include/asm/insn-eval.h:16:57: note: expanded from macro 'INSN_CODE_SEG_PARAMS' #define INSN_CODE_SEG_PARAMS(oper_sz, addr_sz) (oper_sz | (addr_sz << 4)) Those two values do get picked apart afterwards the opposite way of how they were ORed so wrt to the LSByte, the return value is the same. But this function returns -EINVAL in the error case, which is an int. So make it return an int which is the native word size anyway and thus fix the clang warning. Reported-by: NKees Cook <keescook@google.com> Reported-by: NNick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: ricardo.neri-calderon@linux.intel.com Link: https://lkml.kernel.org/r/20171123091951.1462-1-bp@alien8.de
-
由 Chao Fan 提交于
There are two variables "rc" in mem_avoid_memmap. One at the top of the function and another one inside the while() loop. Drop the outer one as it is unused. Cleanup some whitespace damage while at it. Signed-off-by: NChao Fan <fanc.fnst@cn.fujitsu.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: n-horiguchi@ah.jp.nec.com Cc: keescook@chromium.org Link: https://lkml.kernel.org/r/20171123090847.15293-1-fanc.fnst@cn.fujitsu.com
-
- 23 11月, 2017 1 次提交
-
-
由 Andy Lutomirski 提交于
Running this code with IRQs enabled (where dummy_lock is a spinlock): static void check_load_gs_index(void) { /* This will fail. */ load_gs_index(0xffff); spin_lock(&dummy_lock); spin_unlock(&dummy_lock); } Will generate a lockdep warning. The issue is that the actual write to %gs would cause an exception with IRQs disabled, and the exception handler would, as an inadvertent side effect, update irqflag tracing to reflect the IRQs-off status. native_load_gs_index() would then turn IRQs back on and return with irqflag tracing still thinking that IRQs were off. The dummy lock-and-unlock causes lockdep to notice the error and warn. Fix it by adding the missing tracing. Apparently nothing did this in a context where it mattered. I haven't tried to find a code path that would actually exhibit the warning if appropriately nasty user code were running. I suspect that the security impact of this bug is very, very low -- production systems don't run with lockdep enabled, and the warning is mostly harmless anyway. Found during a quick audit of the entry code to try to track down an unrelated bug that Ingo found in some still-in-development code. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/e1aeb0e6ba8dd430ec36c8a35e63b429698b4132.1511411918.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 11月, 2017 2 次提交
-
-
由 Andrey Ryabinin 提交于
[ Note, this commit is a cherry-picked version of: d17a1d97: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow") ... for easier x86 entry code testing and back-porting. ] The KASAN shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for KASAN, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
When I added entry_SYSCALL_64_after_hwframe(), I left TRACE_IRQS_OFF before it. This means that users of entry_SYSCALL_64_after_hwframe() were responsible for invoking TRACE_IRQS_OFF, and the one and only user (Xen, added in the same commit) got it wrong. I think this would manifest as a warning if a Xen PV guest with CONFIG_DEBUG_LOCKDEP=y were used with context tracking. (The context tracking bit is to cause lockdep to get invoked before we turn IRQs back on.) I haven't tested that for real yet because I can't get a kernel configured like that to boot at all on Xen PV. Move TRACE_IRQS_OFF below the label. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 8a9949bc ("x86/xen/64: Rearrange the SYSCALL entries") Link: http://lkml.kernel.org/r/9150aac013b7b95d62c2336751d5b6e91d2722aa.1511325444.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 11月, 2017 5 次提交
-
-
由 Dave Hansen 提交于
write() is marked as having a must-check return value. Check it and abort if we fail to write an error message from a signal handler. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001232.94813E58@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
'si_pkey' is now #defined to be the name of the new siginfo field that protection keys uses. Rename it not to conflict. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001231.DFFC8285@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
The MPX hardware data structurse are defined in a weird way: they define their size in bytes and then union that with the type with which we want to access them. Yes, this is weird, but it does work. But, new GCC's complain that we are accessing the array out of bounds. Just make it a zero-sized array so gcc will stop complaining. There was not really a bug here. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001229.58A7933D@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
Now that CPUs that implement Memory Protection Keys are publicly available we can be a bit less oblique about where it is available. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171111001228.DC748A10@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ricardo Neri 提交于
Print a rate-limited warning when a user-space program attempts to execute any of the instructions that UMIP protects (i.e., SGDT, SIDT, SLDT, STR and SMSW). This is useful, because when CONFIG_X86_INTEL_UMIP=y is selected and supported by the hardware, user space programs that try to execute such instructions will receive a SIGSEGV signal that they might not expect. In the specific cases for which emulation is provided (instructions SGDT, SIDT and SMSW in protected and virtual-8086 modes), no signal is generated. However, a warning is helpful to encourage updates in such programs to avoid the use of such instructions. Warnings are printed via a customized printk() function that also provides information about the program that attempted to use the affected instructions. Utility macros are defined to wrap umip_printk() for the error and warning kernel log levels. While here, replace an existing call to the generic rate-limited pr_err() with the new umip_pr_err(). Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1511233476-17088-1-git-send-email-ricardo.neri-calderon@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 17 11月, 2017 6 次提交
-
-
由 Prarit Bhargava 提交于
A system booted with a small number of cores enabled per package panics because the estimate of __max_logical_packages is too low. This occurs when the total number of active cores across all packages is less than the maximum core count for a single package. e.g.: On a 4 package system with 20 cores/package where only 4 cores are enabled on each package, the value of __max_logical_packages is calculated as DIV_ROUND_UP(16 / 20) = 1 and not 4. Calculate __max_logical_packages after the cpu enumeration has completed. Use the boot cpu's data to extrapolate the number of packages. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kan Liang <kan.liang@intel.com> Cc: He Chen <he.chen@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Piotr Luc <piotr.luc@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mathias Krause <minipli@googlemail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171114124257.22013-4-prarit@redhat.com
-
由 Andi Kleen 提交于
Analyzing large early boot allocations unveiled the logical package id storage as a prominent memory waste. Since commit 1f12e32f ("x86/topology: Create logical package id") every 64-bit system allocates a 128k array to convert logical package ids. This happens because the array is sized for MAX_LOCAL_APIC which is always 32k on 64bit systems, and it needs 4 bytes for each entry. This is fairly wasteful, especially for the common case of having only one socket, which uses exactly 4 byte out of 128K. There is no user of the package id map which is performance critical, so the lookup is not required to be O(1). Store the logical processor id in cpu_data and use a loop based lookup. To keep the mapping stable accross cpu hotplug operations, add a flag to cpu_data which is set when the CPU is brought up the first time. When the flag is set, then cpu_data is not reinitialized by copying boot_cpu_data on subsequent bringups. [ tglx: Rename the flag to 'initialized', use proper pointers instead of repeated cpu_data(x) evaluation and massage changelog. ] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kan Liang <kan.liang@intel.com> Cc: He Chen <he.chen@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Piotr Luc <piotr.luc@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mathias Krause <minipli@googlemail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171114124257.22013-3-prarit@redhat.com
-
由 Andi Kleen 提交于
The SNB-EP uncore driver is the only user of topology_phys_to_logical_pkg in a performance critical path. Change it query the logical pkg ID only once at initialization time and then cache it in box structure. This allows to change the logical package management without affecting the performance critical path. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Kan Liang <kan.liang@intel.com> Cc: He Chen <he.chen@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Piotr Luc <piotr.luc@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Mathias Krause <minipli@googlemail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20171114124257.22013-2-prarit@redhat.com
-
由 Vikas C Sajjan 提交于
The new function mp_register_ioapic_irq() is a subset of the code in mp_override_legacy_irq(). Replace the code duplication by invoking mp_register_ioapic_irq() from mp_override_legacy_irq(). Signed-off-by: NVikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-3-git-send-email-vikas.cha.sajjan@hpe.com
-
由 Vikas C Sajjan 提交于
Platforms which support only IOAPIC mode, pass the SCI information above the legacy space (0-15) via the FADT mechanism and not via MADT. In such cases mp_override_legacy_irq() which is invoked from acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts greater equal 16, since it is meant to handle only the legacy space and emits error "Invalid bus_irq %u for legacy override". Add a new function to handle SCI interrupts >= 16 and invoke it conditionally in acpi_sci_ioapic_setup(). The code duplication due to this new function will be cleaned up in a separate patch. Co-developed-by: NSunil V L <sunil.vl@hpe.com> Signed-off-by: NVikas C Sajjan <vikas.cha.sajjan@hpe.com> Signed-off-by: NSunil V L <sunil.vl@hpe.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: NAbdul Lateef Attar <abdul-lateef.attar@hpe.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Cc: kkamagui@gmail.com Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/1510848825-21965-2-git-send-email-vikas.cha.sajjan@hpe.com
-
由 Tom Lendacky 提交于
When crosvm is used to boot a kernel as a VM, the SMP MP-table is found at physical address 0x0. This causes mpf_base to be set to 0 and a subsequent "if (!mpf_base)" check in default_get_smp_config() results in the MP-table not being parsed. Further into the boot this results in an oops when attempting a read_apic_id(). Add a boolean variable that is set to true when the MP-table is found. Use this variable for testing if the MP-table was found so that even a value of 0 for mpf_base will result in continued parsing of the MP-table. Fixes: 5997efb9 ("x86/boot: Use memremap() to map the MPF and MPC data") Reported-by: NTomeu Vizoso <tomeu@tomeuvizoso.net> Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: regression@leemhuis.info Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171106201753.23059.86674.stgit@tlendack-t1.amdoffice.net
-
- 16 11月, 2017 3 次提交
-
-
由 Craig Bergstrom 提交于
One thing /dev/mem access APIs should verify is that there's no way that excessively large pfn's can leak into the high bits of the page table entry. In particular, if people can use "very large physical page addresses" through /dev/mem to set the bits past bit 58 - SOFTW4 and permission key bits and NX bit, that could *really* confuse the kernel. We had an earlier attempt: ce56a86e ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") ... which turned out to be too restrictive (breaking mem=... bootups for example) and had to be reverted in: 90edaac6 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"") This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem) limits the pfns so that it at least fits in the actual pteval_t architecturally: - Make sure mmap_mem() actually validates that the offset fits in phys_addr_t ( This may be indirectly true due to some other check, but it's not entirely obvious. ) - Change valid_mmap_phys_addr_range() to just use phys_addr_valid() on the top byte ( Top byte is sufficient, because mmap_mem() has already checked that it cannot wrap. ) - Add a few comments about what the valid_phys_addr_range() vs. valid_mmap_phys_addr_range() difference is. Signed-off-by: NCraig Bergstrom <craigb@google.com> [ Fixed the checks and added comments. ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> [ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kirill A. Shutemov 提交于
5-level paging provides a 56-bit virtual address space for user space application. But the kernel defaults to mappings below the 47-bit address space boundary, which is the upper bound for 4-level paging, unless an application explicitely request it by using a mmap(2) address hint above the 47-bit boundary. The kernel prevents mappings which spawn across the 47-bit boundary unless mmap(2) was invoked with MAP_FIXED. Add a self-test that covers the corner cases of the interface and validates the correctness of the implementation. [ tglx: Massaged changelog once more ] Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171115143607.81541-2-kirill.shutemov@linux.intel.com
-
由 Kirill A. Shutemov 提交于
In case of 5-level paging, the kernel does not place any mapping above 47-bit, unless userspace explicitly asks for it. Userspace can request an allocation from the full address space by specifying the mmap address hint above 47-bit. Nicholas noticed that the current implementation violates this interface: If user space requests a mapping at the end of the 47-bit address space with a length which causes the mapping to cross the 47-bit border (DEFAULT_MAP_WINDOW), then the vma is partially in the address space below and above. Sanity check the mmap address hint so that start and end of the resulting vma are on the same side of the 47-bit border. If that's not the case fall back to the code path which ignores the address hint and allocate from the regular address space below 47-bit. To make the checks consistent, mask out the address hints lower bits (either PAGE_MASK or huge_page_mask()) instead of using ALIGN() which can push them up to the next boundary. [ tglx: Moved the address check to a function and massaged comment and changelog ] Reported-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171115143607.81541-1-kirill.shutemov@linux.intel.com
-
- 14 11月, 2017 18 次提交
-
-
由 Ricardo Neri 提交于
The STR and SLDT instructions are not emulated by the UMIP code, thus there's no functionality in the decoder to identify them. However, a subsequent commit will introduce a warning about the use of all the instructions that UMIP protect/changes, not only those that are emulated. A first step for that is to add the ability to decode/identify them. Plus, now that STR and SLDT are identified, we need to explicitly avoid their emulation (i.e., not rely on successful identification). Group together all the cases that we do not want to emulate: STR, SLDT and user long mode processes. Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1510640985-18412-4-git-send-email-ricardo.neri-calderon@linux.intel.com [ Rewrote the changelog, fixed ugly col80 artifact. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ricardo Neri 提交于
Indicate that this feature has been enabled. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1510640985-18412-3-git-send-email-ricardo.neri-calderon@linux.intel.com [ Changelog tweaks. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ricardo Neri 提交于
UMIP does cause any performance penalty to the vast majority of x86 code that does not use the legacy instructions affected by UMIP. Also describe UMIP more accurately and explain the behavior that can be expected by the (few) applications that use the affected instructions. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1510640985-18412-2-git-send-email-ricardo.neri-calderon@linux.intel.com [ Spelling fixes, rewrote the changelog. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Rafael J. Wysocki 提交于
Even though aperfmperf_snapshot_khz() caches the samples.khz value to return if called again in a sufficiently short time, its caller, arch_freq_get_on_cpu(), still uses smp_call_function_single() to run it which may allow user space to trigger an IPI storm by reading from the scaling_cur_freq cpufreq sysfs file in a tight loop. To avoid that, move the decision on whether or not to return the cached samples.khz value to arch_freq_get_on_cpu(). This change was part of commit 941f5f0f ("x86: CPU: Fix up "cpu MHz" in /proc/cpuinfo"), but it was not the reason for the revert and it remains applicable. Fixes: 4815d3c5 (cpufreq: x86: Make scaling_cur_freq behave more as expected) Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: NWANG Chao <chao.wang@ucloud.cn> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 timer updates from Thomas Gleixner: "These updates are related to TSC handling: - Support platforms which have synchronized TSCs but the boot CPU has a non zero TSC_ADJUST value, which is considered a firmware bug on normal systems. This applies to HPE/SGI UV platforms where the platform firmware uses TSC_ADJUST to ensure TSC synchronization across a huge number of sockets, but due to power on timings the boot CPU cannot be guaranteed to have a zero TSC_ADJUST register value. - Fix the ordering of udelay calibration and kvmclock_init() - Cleanup the udelay and calibration code" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Mark cyc2ns_init() and detect_art() __init x86/platform/UV: Mark tsc_check_sync as an init function x86/tsc: Make CONFIG_X86_TSC=n build work again x86/platform/UV: Add check of TSC state set by UV BIOS x86/tsc: Provide a means to disable TSC ART x86/tsc: Drastically reduce the number of firmware bug warnings x86/tsc: Skip TSC test and error messages if already unstable x86/tsc: Add option that TSC on Socket 0 being non-zero is valid x86/timers: Move simple_udelay_calibration() past kvmclock_init() x86/timers: Make recalibrate_cpu_khz() void x86/timers: Move the simple udelay calibration to tsc.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cache resource updates from Thomas Gleixner: "This update provides updates to RDT: - A diagnostic framework for the Resource Director Technology (RDT) user interface (sysfs). The failure modes of the user interface are hard to diagnose from the error codes. An extra last command status file provides now sensible textual information about the failure so its simpler to use. - A few minor cleanups and updates in the RDT code" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix a silent failure when writing zero value schemata x86/intel_rdt: Fix potential deadlock during resctrl mount x86/intel_rdt: Fix potential deadlock during resctrl unmount x86/intel_rdt: Initialize bitmask of shareable resource if CDP enabled x86/intel_rdt: Remove redundant assignment x86/intel_rdt/cqm: Make integer rmid_limbo_count static x86/intel_rdt: Add documentation for "info/last_cmd_status" x86/intel_rdt: Add diagnostics when making directories x86/intel_rdt: Add diagnostics when writing the cpus file x86/intel_rdt: Add diagnostics when writing the tasks file x86/intel_rdt: Add diagnostics when writing the schemata file x86/intel_rdt: Add framework for better RDT UI diagnostics
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 APIC updates from Thomas Gleixner: "This update provides a major overhaul of the APIC initialization and vector allocation code: - Unification of the APIC and interrupt mode setup which was scattered all over the place and was hard to follow. This also distangles the timer setup from the APIC initialization which brings a clear separation of functionality. Great detective work from Dou Lyiang! - Refactoring of the x86 vector allocation mechanism. The existing code was based on nested loops and rather convoluted APIC callbacks which had a horrible worst case behaviour and tried to serve all different use cases in one go. This led to quite odd hacks when supporting the new managed interupt facility for multiqueue devices and made it more or less impossible to deal with the vector space exhaustion which was a major roadblock for server hibernation. Aside of that the code dealing with cpu hotplug and the system vectors was disconnected from the actual vector management and allocation code, which made it hard to follow and maintain. Utilizing the new bitmap matrix allocator core mechanism, the new allocator and management code consolidates the handling of system vectors, legacy vectors, cpu hotplug mechanisms and the actual allocation which needs to be aware of system and legacy vectors and hotplug constraints into a single consistent entity. This has one visible change: The support for multi CPU targets of interrupts, which is only available on a certain subset of CPUs/APIC variants has been removed in favour of single interrupt targets. A proper analysis of the multi CPU target feature revealed that there is no real advantage as the vast majority of interrupts end up on the CPU with the lowest APIC id in the set of target CPUs anyway. That change was agreed on by the relevant folks and allowed to simplify the implementation significantly and to replace rather fragile constructs like the vector cleanup IPI with straight forward and solid code. Furthermore this allowed to cleanly separate the allocation details for legacy, normal and managed interrupts: * Legacy interrupts are not longer wasting 16 vectors unconditionally * Managed interrupts have now a guaranteed vector reservation, but the actual vector assignment happens when the interrupt is requested. It's guaranteed not to fail. * Normal interrupts no longer allocate vectors unconditionally when the interrupt is set up (IO/APIC init or MSI(X) enable). The mechanism has been switched to a best effort reservation mode. The actual allocation happens when the interrupt is requested. Contrary to managed interrupts the request can fail due to vector space exhaustion, but drivers must handle a fail of request_irq() anyway. When the interrupt is freed, the vector is handed back as well. This solves a long standing problem with large unconditional vector allocations for a certain class of enterprise devices which prevented server hibernation due to vector space exhaustion when the unused allocated vectors had to be migrated to CPU0 while unplugging all non boot CPUs. The code has been equipped with trace points and detailed debugfs information to aid analysis of the vector space" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) x86/vector/msi: Select CONFIG_GENERIC_IRQ_RESERVATION_MODE PCI/MSI: Set MSI_FLAG_MUST_REACTIVATE in core code genirq: Add config option for reservation mode x86/vector: Use correct per cpu variable in free_moved_vector() x86/apic/vector: Ignore set_affinity call for inactive interrupts x86/apic: Fix spelling mistake: "symmectic" -> "symmetric" x86/apic: Use dead_cpu instead of current CPU when cleaning up ACPI/init: Invoke early ACPI initialization earlier x86/vector: Respect affinity mask in irq descriptor x86/irq: Simplify hotplug vector accounting x86/vector: Switch IOAPIC to global reservation mode x86/vector/msi: Switch to global reservation mode x86/vector: Handle managed interrupts proper x86/io_apic: Reevaluate vector configuration on activate() iommu/amd: Reevaluate vector configuration on activate() iommu/vt-d: Reevaluate vector configuration on activate() x86/apic/msi: Force reactivation of interrupts at startup time x86/vector: Untangle internal state from irq_cfg x86/vector: Compile SMP only code conditionally x86/apic: Remove unused callbacks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull smp/hotplug updates from Thomas Gleixner: "No functional changes, just removal of obsolete and outdated defines, macros and documentation" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Get rid of CPU hotplug notifier leftovers cpu/hotplug: Remove obsolete notifier macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updates from Ingo Molnar: "The main changes in this cycle were: - a refactoring of the early virt init code by merging 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init', which allows simplifications and also the addition of a new ->guest_late_init() callback. (Juergen Gross) - timer_setup() conversion of the UV code (Kees Cook)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/virt/xen: Use guest_late_init to detect Xen PVH guest x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA x86/virt: Add enum for hypervisors to replace x86_hyper x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init' x86/platform/UV: Convert timers to use timer_setup()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debug update from Ingo Molnar: "A single change enhancing stack traces by hiding wrapper function entries" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/stacktrace: Avoid recording save_stack_trace() wrappers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Two changes: Propagate const/__initconst, and use ARRAY_SIZE() some more" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Make iommu_pmu const and __initconst x86: Use ARRAY_SIZE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 boot updates from Ingo Molnar: "Three smaller changes: - clang fix - boot message beautification - unnecessary header inclusion removal" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable Clang warnings about GNU extensions x86/boot: Remove unnecessary #include <generated/utsrelease.h> x86/boot: Spell out "boot CPU" for BP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 core updates from Ingo Molnar: "Note that in this cycle most of the x86 topics interacted at a level that caused them to be merged into tip:x86/asm - but this should be a temporary phenomenon, hopefully we'll back to the usual patterns in the next merge window. The main changes in this cycle were: Hardware enablement: - Add support for the Intel UMIP (User Mode Instruction Prevention) CPU feature. This is a security feature that disables certain instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri) [ Note that this is disabled by default for now, there are some smaller enhancements in the pipeline that I'll follow up with in the next 1-2 days, which allows this to be enabled by default.] - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU feature, on top of SME (Secure Memory Encryption) support that was added in v4.14. (Tom Lendacky, Brijesh Singh) - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES, VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela) Other changes: - A big series of entry code simplifications and enhancements (Andy Lutomirski) - Make the ORC unwinder default on x86 and various objtool enhancements. (Josh Poimboeuf) - 5-level paging enhancements (Kirill A. Shutemov) - Micro-optimize the entry code a bit (Borislav Petkov) - Improve the handling of interdependent CPU features in the early FPU init code (Andi Kleen) - Build system enhancements (Changbin Du, Masahiro Yamada) - ... plus misc enhancements, fixes and cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits) x86/build: Make the boot image generation less verbose selftests/x86: Add tests for the STR and SLDT instructions selftests/x86: Add tests for User-Mode Instruction Prevention x86/traps: Fix up general protection faults caused by UMIP x86/umip: Enable User-Mode Instruction Prevention at runtime x86/umip: Force a page fault when unable to copy emulated result to user x86/umip: Add emulation code for UMIP instructions x86/cpufeature: Add User-Mode Instruction Prevention definitions x86/insn-eval: Add support to resolve 16-bit address encodings x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode x86/insn-eval: Add wrapper function for 32 and 64-bit addresses x86/insn-eval: Add support to resolve 32-bit address encodings x86/insn-eval: Compute linear address in several utility functions resource: Fix resource_size.cocci warnings X86/KVM: Clear encryption attribute when SEV is active X86/KVM: Decrypt shared per-cpu variables when SEV is active percpu: Introduce DEFINE_PER_CPU_DECRYPTED x86: Add support for changing memory encryption attribute in early boot x86/io: Unroll string I/O when SEV is active x86/boot: Add early boot support when running with SEV active ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: "The main updates in this cycle were: - Group balancing enhancements and cleanups (Brendan Jackman) - Move CPU isolation related functionality into its separate kernel/sched/isolation.c file, with related 'housekeeping_*()' namespace and nomenclature et al. (Frederic Weisbecker) - Improve the interactive/cpu-intense fairness calculation (Josef Bacik) - Improve the PELT code and related cleanups (Peter Zijlstra) - Improve the logic of pick_next_task_fair() (Uladzislau Rezki) - Improve the RT IPI based balancing logic (Steven Rostedt) - Various micro-optimizations: - better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi) - better idle loop (Cheng Jian) - ... plus misc fixes, cleanups and updates" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds sched/sysctl: Fix attributes of some extern declarations sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated sched/isolation: Add basic isolcpus flags sched/isolation: Move isolcpus= handling to the housekeeping code sched/isolation: Handle the nohz_full= parameter sched/isolation: Introduce housekeeping flags sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu() sched/isolation: Use its own static key sched/isolation: Make the housekeeping cpumask private sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu() sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version sched/isolation: Move housekeeping related code to its own file sched/idle: Micro-optimize the idle loop sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter sched/rt: Simplify the IPI based RT balancing logic block/ioprio: Use a helper to check for RT prio sched/rt: Add a helper to test for a RT task ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RAS updates from Ingo Molnar: "Two minor updates to AMD SMCA support, plus a timer_setup() conversion" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Fix mce_severity_amd_smca() signature x86/MCE/AMD: Always give panic severity for UC errors in kernel context x86/mce: Convert timers to use timer_setup()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel: - kprobes updates: use better W^X patterns for code modifications, improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook) - core fixes: event timekeeping (enabled/running times statistics) fixes, perf_event_read() locking fixes and cleanups, etc. (Peter Zijlstra) - Extend x86 Intel free-running PEBS support and support x86 user-register sampling in perf record and perf script. (Andi Kleen) Tooling: - Completely rework the way inline frames are handled. Instead of querying for the inline nodes on-demand in the individual tools, we now create proper callchain nodes for inlined frames. (Milian Wolff) - 'perf trace' updates (Arnaldo Carvalho de Melo) - Implement a way to print formatted output to per-event files in 'perf script' to facilitate generate flamegraphs, elliminating the need to write scripts to do that separation (yuzhoujian, Arnaldo Carvalho de Melo) - Update vendor events JSON metrics for Intel's Broadwell, Broadwell Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown, Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi Kleen, Kan Liang) - Multithread the synthesizing of PERF_RECORD_ events for pre-existing threads in 'perf top', speeding up that phase, greatly improving the user experience in systems such as Intel's Knights Mill (Kan Liang) - Introduce the concept of weak groups in 'perf stat': try to set up a group, but if it's not schedulable fallback to not using a group. That gives us the best of both worlds: groups if they work, but still a usable fallback if they don't. E.g: (Andi Kleen) - perf sched timehist enhancements (David Ahern) - ... various other enhancements, updates, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits) kprobes: Don't spam the build log with deprecation warnings arm/kprobes: Remove jprobe test case arm/kprobes: Fix kretprobe test to check correct counter perf srcline: Show correct function name for srcline of callchains perf srcline: Fix memory leak in addr2inlines() perf trace beauty kcmp: Beautify arguments perf trace beauty: Implement pid_fd beautifier tools include uapi: Grab a copy of linux/kcmp.h perf callchain: Fix double mapping al->addr for children without self period perf stat: Make --per-thread update shadow stats to show metrics perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats perf tools: Add perf_data_file__write function perf tools: Add struct perf_data_file perf tools: Rename struct perf_data_file to perf_data perf script: Print information about per-event-dump files perf trace beauty prctl: Generate 'option' string table from kernel headers tools include uapi: Grab a copy of linux/prctl.h perf script: Allow creating per-event dump files perf evsel: Restore evsel->priv as a tool private area perf script: Use event_format__fprintf() ...
-