- 09 6月, 2006 2 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
While testing the genirq code on ARM, a condition was found whereby the Neponset IRQ handler was being re-entered, causing the system to deadlock. Under the ARM IRQ code, this would not have been a visible problem because the "simple" IRQ handling had no re-entrancy protection. Resolve this by acknowledging the parent interrupt after we mask it when we are going to handle one of our "special" level-based sources (from ethernet or USAR chip.) Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 6月, 2006 38 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: fix locking and memory leak in br_add_bridge [IRDA]: Missing allocation result check in irlap_change_speed(). [PPPOE]: Missing result check in __pppoe_xmit(). [NET]: Eliminate unused /proc/sys/net/ethernet [NETCONSOLE]: Clean up initcall warning. [TCP]: Avoid skb_pull if possible when trimming head
-
由 Jiri Benc 提交于
There are several bugs in error handling in br_add_bridge: - when dev_alloc_name fails, allocated net_device is not freed - unregister_netdev is called when rtnl lock is held - free_netdev is called before netdev_run_todo has a chance to be run after unregistering net_device Signed-off-by: NJiri Benc <jbenc@suse.cz> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] typo: buad -> baud
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy [MMC] Add maintainers entry for MMC subsystem
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3543/1: [Fwd: PXA270 bootparams address not set] [ARM] Trivial typo fixes
-
由 Chad Reese 提交于
Move memory_present() in arch/mips/kernel/setup.c. When using sparsemem extreme, this function does an allocate for bootmem. This would always fail since init_bootmem hasn't been called yet. Move memory_present after free_bootmem. This only marks actual memory ranges as present instead of the entire address space. Signed-off-by: NChad Reese <creese@caviumnetworks.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Fix following warnings: linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 2) linux/arch/mips/kernel/setup.c:432: warning: field width is not type int (arg 4) linux/arch/mips/kernel/syscall.c:279: warning: unused variable `len' linux/arch/mips/kernel/syscall.c:280: warning: unused variable `name' linux/arch/mips/math-emu/dp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/dp_flong.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_fint.c:32: warning: unused variable `xc' linux/arch/mips/math-emu/sp_flong.c:32: warning: unused variable `xc' (original patch by Atsushi, slight changes to the setup.c part by me.) Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Fix following warnings: linux/arch/mips/kernel/setup.c:249:12: warning: constant 0xffffffff00000000 is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:209:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:227:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:283:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long linux/arch/mips/kernel/cpu-bugs64.c:299:10: warning: constant 0xffffffffffffdb9a is so big it is unsigned long Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
RM7000 has 40-bit virtual / 36-bit physical address space. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The expressions are volatile; no need for temporary variables. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix the non-linear memory mapping done via remap_file_pages() -- it didn't work on any MIPS CPU because the page offset clashing with _PAGE_FILE and some other page protection bits which should have been left zeros for this kind of pages. Signed-off-by: NKonstantin Baydarov <kbaidarov@ru.mvista.com> Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The wrong revision number in the check was forcing a fallback to FPU emulation for all SB1 cores in 2.6. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
open() always sets the O_LARGEFILE flag for the o32 ABI implementation of a 64bit kernel. The appended patch fixes it. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Alchemy boards use YAMON which passes the environment variables as the tuples of strings (the name followed by the value) unlike PMON which passes "name=<val>" strings. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
With 64-bit physical address enabled, 'swapon' was causing kernel oops on Alchemy CPUs (MIPS32) because of the swap entry type field corrupting the _PAGE_FILE bit in 'pte_low' field. So, switch to storing the swap entry in 'pte_high' field using all its bits except _PAGE_GLOBAL and _PAGE_VALID which gives 25 bits for the swap entry offset. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix mprotect() syscall for MIPS32 CPUs with 36-bit physical address support: pte_modify() macro didn't clear the hardware page protection bits before modifying... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Save the Config.OD bit from being clobbered by coherency_setup(). This bit, when set, fixes various errata in the early steppings of Au1x00 SOCs. Unfortunately, the bit was write-only on the most early of them. In addition, also restore the bit after a wakeup from sleep. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
A while ago prom_prepare_cpus was replaced by plat_prepare_cpus but the declaration has stayed unchanged. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The modpost uses a whitelist for commonly used suffix on checking the section mismatch. Adding "_ops" suffix to op_modex_xxx get rid of this modpost warning. WARNING: arch/mips/oprofile/oprofile.o - Section mismatch: reference to .init.text: from .data after 'op_model_mipsxx' (at offset 0x528) Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Increase alignment of BogoMIPS loop to 8 bytes. Having the delay loop overlap cache line boundaries may cause instable delays. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florin Malita 提交于
The skb allocation may fail, which can result in a NULL pointer dereference in irlap_queue_xmit(). Coverity CID: 434. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florin Malita 提交于
skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jes Sorensen 提交于
The /proc/sys/net/ethernet directory has been sitting empty for more than 10 years! Time to eliminate it! Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Mackall 提交于
From: Matt Mackall <mpm@selenic.com> netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu ~{PmVHI~} 提交于
Trimming the head of an skb by calling skb_pull can cause the packet to become unaligned if the length pulled is odd. Since the length is entirely arbitrary for a FIN packet carrying data, this is actually quite common. Unaligned data is not the end of the world, but we should avoid it if it's easily done. In this case it is trivial. Since we're discarding all of the head data it doesn't matter whether we move skb->data forward or back. However, it is still possible to have unaligned skb->data in general. So network drivers should be prepared to handle it instead of crashing. This patch also adds an unlikely marking on len < headlen since partial ACKs on head data are extremely rare in the wild. As the return value of __pskb_trim_head is no longer ever NULL that has been removed. Signed-off-by: NHerbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] pcmcia: fix zeroing of cm4000_cs.c data [PATCH] pcmcia: missing pcmcia_get_socket() result check
-
由 Jeff Dike 提交于
From: Jeff Dike <jdike@addtoit.com> This fixes the undefined reference to strcpy seen when building modules on i386. Tracked down by Al Viro. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
From: Al Viro <viro@zeniv.linux.org.uk> uml __user annotations Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
From: Al Viro <viro@zeniv.linux.org.uk> fix uml/amd64 prctl() put_user() there should go to (long __user *)addr, not &addr Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
From: Jeff Dike <jdike@addtoit.com> We had a spurious semicolon somehow. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
From: Jeff Dike <jdike@addtoit.com> Initialize wall_to_monotonic correctly. This fixes a problem where sleeps lasted about one secone less than they should. This also called for a bit of code restructuring, following a patch which Blaisorblade had been keeping. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
From: Jeff Dike <jdike@addtoit.com> Add an empty asm/irqflags.h, which seems to satisfy the lock validator enough that UML builds. Signed-off-by: NJeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
From: Andrew Morton <akpm@osdl.org> drivers/rtc/rtc-m48t86.c: In function `m48t86_rtc_read_time': drivers/rtc/rtc-m48t86.c:51: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:55: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:56: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:57: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:58: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:60: error: structure has no member named `ia64_mv' readb() and writeb() are macros on ia64. Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-