- 03 9月, 2016 5 次提交
-
-
由 Sebastian Frias 提交于
According to the xlate() callback definition, the 'out_type' parameter needs to be the "linux irq type". A mask for such bits exists, IRQ_TYPE_SENSE_MASK, which is correctly applied in irq_domain_xlate_twocell() So use it for irq_domain_xlate_onetwocell() as well. Signed-off-by: NSebastian Frias <sf84@laposte.net> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mason <slash.tmp@free.fr> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/57A05F5D.103@laposte.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sebastian Frias 提交于
Without this patch irq_domain_disassociate() cannot properly release the interrupt. In fact, irq_map_generic_chip() checks a bit on 'gc->installed' but said bit is never cleared, only set. Commit 088f40b7 ("genirq: Generic chip: Add linear irq domain support") added irq_map_generic_chip() function and also stated "This lacks a removal function for now". This commit provides an implementation of an unmap function that can be called by irq_domain_disassociate(). [ tglx: Made the function static and removed the export as we have neither a prototype nor a modular user. ] Fixes: 088f40b7 ("genirq: Generic chip: Add linear irq domain support") Signed-off-by: NSebastian Frias <sf84@laposte.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mason <slash.tmp@free.fr> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/579F5C5A.2070507@laposte.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sebastian Frias 提交于
irq_map_generic_chip() contains about the same code as irq_get_domain_generic_chip() except for the return values. Split out the irq_get_domain_generic_chip() implementation so it can be reused. [ tglx: Removed the extra churn in irq_get_domain_generic_chip() callers and massaged changelog ] Signed-off-by: NSebastian Frias <sf84@laposte.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mason <slash.tmp@free.fr> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/579F5C69.8070006@laposte.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
No module users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The percpu_devid handler is not robust against spurious interrupts. If a spurious interrupt happens and no action is installed then the handler crashes with a NULL pointer dereference. Add a sanity check for this and log the wreckage once in dmesg. Reported-by: NMajun <majun258@huawei.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: guohanjun@huawei.com Cc: dingtianhong@huawei.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609021436160.5647@nanos
-
- 19 7月, 2016 1 次提交
-
-
由 Vincent Stehle 提交于
The new affinity hint argument of __irq_domain_alloc_irqs() is missing in irq_reserve_ipi(). Add it. This fixes the following compilation error: kernel/irq/ipi.c: In function ‘irq_reserve_ipi’: kernel/irq/ipi.c:85:9: error: too few arguments to function ‘__irq_domain_alloc_irqs’ virq = __irq_domain_alloc_irqs(domain, virq, nr_irqs, NUMA_NO_NODE, ^ Fixes: 06ee6d57 ("genirq: Add affinity hint to irq allocation") Signed-off-by: NVincent Stehlé <vincent.stehle@laposte.net> Cc: linux-pci@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 7月, 2016 1 次提交
-
-
由 Alexander Popov 提交于
If an irq_domain is auto-recursive and irq_domain_alloc_irqs_recursive() for its parent has returned an error, then do return and avoid calling irq_domain_free_irqs_recursive() uselessly, because: - if domain->ops->alloc() had failed for an auto-recursive irq_domain, then irq_domain_free_irqs_recursive() had already been called; - if domain->ops->alloc() had failed for a not auto-recursive irq_domain, then there is nothing to free at all. Signed-off-by: NAlexander Popov <alex.popov@linux.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1467505448-2850-1-git-send-email-alex.popov@linux.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 7月, 2016 1 次提交
-
-
由 John Kacur 提交于
This command: echo 5 > /proc/irq/10/smp_affinity means only the first and third (not fourth) CPUs can handle irqs That is, CPU0 is the first CPU and CPU2 is the third cpu Signed-off-by: NJohn Kacur <jkacur@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466168715-8410-1-git-send-email-jkacur@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 06 7月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
Jiang is not longer working for Intel and we have no new mail address. Avoid that people cc him. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 04 7月, 2016 11 次提交
-
-
由 Thomas Gleixner 提交于
virq is not required to be the same for all msi descs. Use the base irq number from the desc in the debug printk. Reported-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Pull the irq affinity managing code which is in a seperate branch for block developers to pull.
-
由 Christoph Hellwig 提交于
This is lifted from the blk-mq code and adopted to use the affinity mask concept just introduced in the irq handling code. It tries to keep the algorithm the same as the one current used by blk-mq, but improvements like assining vectors on a per-node basis instead of just per sibling are possible with this simple move and refactoring. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-7-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Allow the MSI code to provide affinity hints per MSI descriptor. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-6-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Use the affinity hint in the irqdesc allocator. The hint is used to determine the node for the allocation and to set the affinity of the interrupt. If multiple interrupts are allocated (multi-MSI) then the allocator iterates over the cpumask and for each set cpu it allocates on their node and sets the initial affinity to that cpu. If a single interrupt is allocated (MSI-X) then the allocator uses the first cpu in the mask to compute the allocation node and uses the mask for the initial affinity setting. Interrupts set up this way are marked with the AFFINITY_MANAGED flag to prevent userspace from messing with their affinity settings. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-5-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Add an extra argument to the irq(domain) allocation functions, so we can hand down affinity hints to the allocator. Thats necessary to implement proper support for multiqueue devices. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-4-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Interupts marked with this flag are excluded from user space interrupt affinity changes. Contrary to the IRQ_NO_BALANCING flag, the kernel internal affinity mechanism is not blocked. This flag will be used for multi-queue device interrupts. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-3-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
No user and we definitely don't want to grow one. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-2-git-send-email-hch@lst.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse fix from Miklos Szeredi: "This makes sure userspace filesystems are not broken by the parallel lookups and readdir feature" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: serialize dirops by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs fixes from Miklos Szeredi: "This contains fixes for a dentry leak, a regression in 4.6 noticed by Docker users and missing write access checking in truncate" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: warn instead of error if d_type is not supported ovl: get_write_access() in truncate ovl: fix dentry leak for default_permissions
-
- 03 7月, 2016 7 次提交
-
-
由 Vivek Goyal 提交于
overlay needs underlying fs to support d_type. Recently I put in a patch in to detect this condition and started failing mount if underlying fs did not support d_type. But this breaks existing configurations over kernel upgrade. Those who are running docker (partially broken configuration) with xfs not supporting d_type, are surprised that after kernel upgrade docker does not run anymore. https://github.com/docker/docker/issues/22937#issuecomment-229881315 So instead of erroring out, detect broken configuration and warn about it. This should allow existing docker setups to continue working after kernel upgrade. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com> Fixes: 45aebeaf ("ovl: Ensure upper filesystem supports d_type") Cc: <stable@vger.kernel.org> 4.6
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fix from Ralf Baechle: "Only a single fix for 4.7 pending at this point. It fixes an issue that may lead to corruption of the cache mode bits in the page table" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix possible corruption of cache mode by mprotect.
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - tm: Always reclaim in start_thread() for exec() class syscalls from Cyril Bur - tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael Neuling - eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan - Initialise pci_io_base as early as possible from Darren Stevens * tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Initialise pci_io_base as early as possible powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 powerpc/eeh: Fix wrong argument passed to eeh_rmv_device() powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes frlm Dave Airlie: "Just some AMD and Intel fixes, the AMD ones are further production Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID changes and a couple of other fixes. Still a bit Internet challenged here, hopefully end of next week will solve it" * tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/amd/powerplay: workaround for UVD clock issue drm/amdgpu: add ACLK_CNTL setting for polaris10 drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation drm/amd/powerplay: disable FFC. drm/amd/powerplay: add some definition for FFC feature on polaris.
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A few small driver-specific fixes for SPI, all in the normal important if you hit them category especially the rockchip driver fix which addresses a race which has been exposed more frequently with some recent performance improvements" * tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sunxi: fix transfer timeout spi: sun4i: fix FIFO limit spi: rockchip: Signal unfinished DMA transfers spi: spi-ti-qspi: Suspend the queue before removing the device
-
由 Linus Torvalds 提交于
Merge tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two small fixes for the regulator subsystem - one fixing a crash with one of the devices supported by the max77620 driver, another fixing startup for the anatop regulator when it starts up with the regulator in bypass mode" * tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max77620: check for valid regulator info regulator: anatop: allow regulator to be in bypass mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "A small fix for the newly added oxnas clk driver and a handful of rockchip clk driver fixes for newly added rk3399 support" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix return value check in oxnas_stdclk_probe() clk: rockchip: release io resource when failing to init clk on rk3399 clk: rockchip: fix cpuclk registration error handling clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src clk: rockchip: mark rk3399 GIC clocks as critical clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
-
- 02 7月, 2016 13 次提交
-
-
git://git.infradead.org/users/jcooper/linux由 Thomas Gleixner 提交于
Pull irqchip core changes for v4.8 (second set) from Jason Cooper: - Add Aspeed VIC driver
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
here's a batch of i915 fixes for 4.7. * tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Just a few more late fixes for Polaris cards. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: workaround for UVD clock issue drm/amdgpu: add ACLK_CNTL setting for polaris10 drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation drm/amd/powerplay: disable FFC. drm/amd/powerplay: add some definition for FFC feature on polaris.
-
由 Jason Cooper 提交于
-
由 Ralf Baechle 提交于
The following testcase may result in a page table entries with a invalid CCA field being generated: static void *bindstack; static int sysrqfd; static void protect_low(int protect) { mprotect(bindstack, BINDSTACK_SIZE, protect); } static void sigbus_handler(int signal, siginfo_t * info, void *context) { void *addr = info->si_addr; write(sysrqfd, "x", 1); printf("sigbus, fault address %p (should not happen, but might)\n", addr); abort(); } static void run_bind_test(void) { unsigned int *p = bindstack; p[0] = 0xf001f001; write(sysrqfd, "x", 1); /* Set trap on access to p[0] */ protect_low(PROT_NONE); write(sysrqfd, "x", 1); /* Clear trap on access to p[0] */ protect_low(PROT_READ | PROT_WRITE | PROT_EXEC); write(sysrqfd, "x", 1); /* Check the contents of p[0] */ if (p[0] != 0xf001f001) { write(sysrqfd, "x", 1); /* Reached, but shouldn't be */ printf("badness, shouldn't happen but does\n"); abort(); } } int main(void) { struct sigaction sa; sysrqfd = open("/proc/sysrq-trigger", O_WRONLY); if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) { perror("sigprocmask"); return 0; } sa.sa_sigaction = sigbus_handler; sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART; if (sigaction(SIGBUS, &sa, NULL)) { perror("sigaction"); return 0; } bindstack = mmap(NULL, BINDSTACK_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (bindstack == MAP_FAILED) { perror("mmap bindstack"); return 0; } printf("bindstack: %p\n", bindstack); run_bind_test(); printf("done\n"); return 0; } There are multiple ingredients for this: 1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3 on all platforms except SB1 where it's CCA 5. 2) _page_cachable_default must have bits set which are not set _CACHE_CACHABLE_NONCOHERENT. 3) Either the defective version of pte_modify for XPA or the standard version must be in used. However pte_modify for the 36 bit address space support is no affected. In that case additional bits in the final CCA mode may generate an invalid value for the CCA field. On the R10000 system where this was tracked down for example a CCA 7 has been observed, which is Uncached Accelerated. Fixed by: 1) Using the proper CCA mode for PAGE_NONE just like for all the other PAGE_* pte/pmd bits. 2) Fix the two affected variants of pte_modify. Further code inspection also shows the same issue to exist in pmd_modify which would affect huge page systems. Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE and pmd_modify issue found by me. The history of this goes back beyond Linus' git history. Chris Dearman's commit 35133692 ("[MIPS] Allow setting of the cache attribute at run time.") missed the opportunity to fix this but it was originally introduced in lmo commit d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.") and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option CONFIG_MIPS_UNCACHED.") Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Reported-by: NAlastair Bridgewater <alastair.bridgewater@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fix from Rafael Wysocki: "Fix an expression in the ACPI PCI IRQ management code added by a recent commit that overlooked missing parens in it, so the result of the computation is incorrect in some cases (Sinan Kaya)" * tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI,PCI,IRQ: correct operator precedence
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "Three cpufreq fixes, one in the core (stable-candidate) and two in drivers (intel_pstate and cpufreq-dt). Specifics: - Fix a recent intel_pstate regression that caused the number of wakeups to increase significantly on an idle system in some cases due to excessive synchronize_sched() invocations (Rafael Wysocki). - Fix unnecessary invocations of WARN_ON() in the cpufreq core after cpufreq has been suspended introduced during the 4.6 cycla (Rafael Wysocki). - Fix an error code path in the cpufreq-dt-platdev driver that forgets to drop a reference to a DT node (Masahiro Yamada)" * tag 'pm-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy() cpufreq: dt: call of_node_put() before error out intel_pstate: Do not clear utilization update hooks on policy changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "Tmpfs readdir throughput regression fix (this cycle) + some -stable fodder all over the place. One missing bit is Miklos' tonight locks.c fix - NFS folks had already grabbed that one by the time I woke up ;-)" [ The locks.c fix came through the nfsd tree just moments ago ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: namespace: update event counter when umounting a deleted dentry 9p: use file_dentry() ceph: fix d_obtain_alias() misuses lockless next_positive() libfs.c: new helper - next_positive() dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull lockd/locks fixes from Bruce Fields: "One fix for lockd soft lookups in an error path, and one fix for file leases on overlayfs" * tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux: locks: use file_inode() lockd: unregister notifier blocks if the service fails to come up completely
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd由 Linus Torvalds 提交于
Pull more MFD fixes from Lee Jones: "Apologies for missing these from the first pull request. Final patches fixing Reset API change" * tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: usb: dwc3: st: Use explicit reset_control_get_exclusive() API phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API phy: miphy28lp: Inform the reset framework that our reset line may be shared
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "1/ Two regression fixes since v4.6: one for the byte order of a sysfs attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI Device Specific Method) implementation that gets tripped up by new auto-probing behavior in the NFIT driver. 2/ A fix tagged for -stable that stops the kernel from clobbering/ignoring changes to the configuration of a 'pfn' instance ("struct page" driver). For example changing the alignment from 2M to 1G may silently revert to 2M if that value is currently stored on media. 3/ A fix from Eric for an xfstests failure in dax. It is not currently tagged for -stable since it requires an 8-exabyte file system to trigger, and there appear to be no user visible side effects" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: fix format interface code byte order dax: fix offset overflow in dax_io acpi, nfit: fix acpi_check_dsm() vs zero functions implemented libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO fixes from Greg KH: "Here are a few small staging and iio driver fixes for 4.7-rc6. Nothing major here, just a number of small fixes, all have been in linux-next for a while, and the full details are in the shortlog" * tag 'staging-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio:ad7266: Fix probe deferral for vref iio:ad7266: Fix support for optional regulators iio:ad7266: Fix broken regulator error handling iio: accel: kxsd9: fix the usage of spi_w8r8() staging: iio: accel: fix error check staging: iio: ad5933: fix order of cycle conditions staging: iio: fix ad7606_spi regression iio: inv_mpu6050: Fix use-after-free in ACPI code
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty fixes from Greg KH: "Here are two tty fixes for some reported issues. One resolves a crash in devpts, and the other resolves a problem with the fbcon cursor blink causing lockups. Both have been in linux-next with no reported problems" * tag 'tty-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: devpts: fix null pointer dereference on failed memory allocation tty: vt: Fix soft lockup in fbcon cursor blink timer.
-