The previous commit that changed this code to the common GPIO layers
forgot to delete the local and now unused "i" variable.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

No code uses these, and the short define names are polluting the global
namespace where they collide with things like common irq files.  So just
punt the damned things.  If in the future we need HDMA support, we can
make a standalone header for these things.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Hook up name_to_handle_at, open_by_handle_at, and clock_adjtime.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This patch fixes the Blackfin irqflags to make them I-pipe aware anew,
after the introduction of the hard_local_irq_*() API.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This patch makes sure to sync the pipeline for the root stage only
from the outer interrupt level, when resuming kernel code after an
interrupt.

This fixes a bug causing EVT15 to be spuriously popped off upon nested
interrupts, which in turn would cause the preempted kernel code to
resume without supervisor privileges.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

This patch introduces Blackfin-specific bits to support the current
tip of the interrupt pipeline development, mainly:

- 2/3-level interrupt maps (sparse IRQs)
- generic virq handling
- sysinfo v2 format for ipipe_get_sysinfo()
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

No functional changes here.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

All chips converted.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Fixup the open coded access to irq_desc and use the proper wrappers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Take advantage of more Blackfin-specific insns, and only initialize
registers required by the ABI.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

In order to safely work around anomaly 05000491, we have to execute IFLUSH
from L1 instruction sram.  The trouble with multi-core systems is that all
L1 sram is visible only to the active core.  So we can't just place the
functions into L1 and call it directly.  We need to setup a jump table and
place the entry point in external memory.  This will call the right func
based on the active core.

In the process, convert from the manual relocation of a small bit of code
into Core B's L1 to the more general framework we already have in place
for loading arbitrary pieces of code into L1.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Re-use some of the existing cpu hotplugging code in the process.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We need to place icache flush funcs into L1 inst sram to work around a
hardware anomaly.  But this currently breaks SMP support as the L1 inst
sram is per-core and cannot be called directly.  So in preparation for
making that work, split the two options.

Further, split out the SMP depend so that we can allow some for SMP.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The smp_processor_id() API requires that preempt be disabled when calling
it, so make sure it is when we go to send messages to other processors.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Defer bfin_setup_caches(cpu) to avoid unexpected faults due to the cpu
state not yet being fully initialized.
Signed-off-by: Nsteven miao <realmz6@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Common code checks the alignment of some of the variables and calls BUG()
if they aren't page aligned.
Signed-off-by: Nsteven miao <realmz6@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We use these insns when testing, so enable them by default for all
of our development boards.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Common code no longer defines this, so stop using it.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The board doesn't actually have a pin hooked up to do card detection,
so punt the code for it.
Signed-off-by: NAndreas Schallenberg <Andreas.Schallenberg@3alitydigital.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NAaron Wu <aaronwu06@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The BF54x lacks dedicated DMA channels for the UART peripherals and need
to be muxed between others.  So add a kconfig option so people can select
which channels the UARTs will use so they can pick between SPORTs and the
less commonly used EPPI/PIXC peripherals.
Signed-off-by: Nsteven miao <realmz6@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Since coreb_trampoline_start() calls coreb_start(), they need to be in
the same section.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (27 commits)
  arch/tile: support newer binutils assembler shift semantics
  arch/tile: fix deadlock bugs in rwlock implementation
  drivers/edac: provide support for tile architecture
  tile on-chip network driver: sync up with latest fixes
  arch/tile: support 4KB page size as well as 64KB
  arch/tile: add some more VMSPLIT options and use consistent naming
  arch/tile: fix some comments and whitespace
  arch/tile: export some additional module symbols
  arch/tile: enhance existing finv_buffer_remote() routine
  arch/tile: fix two bugs in the backtracer code
  arch/tile: use extended assembly to inline __mb_incoherent()
  arch/tile: use a cleaner technique to enable interrupt for cpu_idle()
  arch/tile: sync up with <arch/sim.h> and <arch/sim_def.h> changes
  arch/tile: fix reversed test of strict_strtol() return value
  arch/tile: avoid a simulator warning during bootup
  arch/tile: export <asm/hardwall.h> to userspace
  arch/tile: warn and retry if an IPI is not accepted by the target cpu
  arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls
  arch/tile: fix __ndelay etc to work better
  arch/tile: bug fix: exec'ed task thought it was still single-stepping
  ...

Fix up trivial conflict in arch/tile/kernel/vmlinux.lds.S (percpu
alignment vs section naming convention fix)

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits)
  msm: scm: Check for interruption immediately
  msm: scm: Fix improper register assignment
  msm: scm: Mark inline asm as volatile
  msm: iommu: Enable HTW L2 redirection on MSM8960
  msm: iommu: Don't read from write-only registers
  msm: iommu: Remove dependency on IDR
  msm: iommu: Use ASID tagging instead of VMID tagging
  msm: iommu: Rework clock logic and add IOMMU bus clock control
  msm: iommu: Clock control for the IOMMU driver
  msm: mdp: Set the correct pack pattern for XRGB/ARGB
  msm_fb: Fix framebuffer console
  msm: mdp: Add support for RGBX 8888 image format.
  video: msmfb: Put the partial update magic value into the fix_screen struct.
  msm: clock: Migrate to clkdev
  msm: clock: Remove references to clk_ops_pcom
  msm: headsmp.S: Fix section mismatch
  msm: Use explicit GPLv2 licenses
  msm: iommu: Enable IOMMU support for MSM8960
  msm: iommu: Generalize platform data for multiple targets
  msm: iommu: Create a Kconfig item for the IOMMU driver
  ...

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

* 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6647/1: add Versatile Express defconfig
  ARM: 6644/1: mach-ux500: update the U8500 defconfig

* 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6764/1: pl011: factor out FIFO to TTY code
  ARM: 6763/1: pl011: add optional RX DMA to PL011 v2
  ARM: 6758/1: amba: support pm ops
  ARM: amba: make amba_driver id_table const
  ARM: amba: make internal ID table handling const
  ARM: amba: make probe() functions take const id tables
  ARM: 6662/1: amba: make amba_bustype non-static
  ARM: mmci: add dmaengine-based DMA support
  ARM: mmci: no need for separate host->data_xfered
  ARM: mmci: avoid unnecessary switch to data available PIO interrupts
  ARM: mmci: no need to call flush_dcache_page() with sg_miter API
  ARM: mmci: avoid reporting too many completed bytes on fifo overrun
  ALSA: AACI: make fifo variables more explanitory
  ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period
  ALSA: AACI: use snd_pcm_lib_period_bytes()
  ALSA: AACI: clean up AACI announcement printk
  ALSA: AACI: fix channel mask selection
  ALSA: AACI: fix number of channels for record
  ALSA: AACI: fix multiple IRQ claiming

* 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm:
  VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()
  VIDEO: cyberpro: remove useless function extreg pointers
  VIDEO: cyberpro: update handling of device structures
  VIDEO: cyberpro: add support for video capture I2C
  VIDEO: cyberpro: make 'reg_b0_lock' always present
  VIDEO: cyberpro: add I2C support
  VIDEO: cyberpro: select lowest multipler/divisor for PLL

* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits)
  KVM: unbreak userspace that does not sets tss address
  KVM: MMU: cleanup pte write path
  KVM: MMU: introduce a common function to get no-dirty-logged slot
  KVM: fix rcu usage in init_rmode_* functions
  KVM: fix kvmclock regression due to missing clock update
  KVM: emulator: Fix permission checking in io permission bitmap
  KVM: emulator: Fix io permission checking for 64bit guest
  KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n
  KVM: x86: Remove useless regs_page pointer from kvm_lapic
  KVM: improve comment on rcu use in irqfd_deassign
  KVM: MMU: remove unused macros
  KVM: MMU: cleanup page alloc and free
  KVM: MMU: do not record gfn in kvm_mmu_pte_write
  KVM: MMU: move mmu pages calculated out of mmu lock
  KVM: MMU: set spte accessed bit properly
  KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits
  KVM: Start lock documentation
  KVM: better readability of efer_reserved_bits
  KVM: Clear async page fault hash after switching to real mode
  KVM: VMX: Initialize vm86 TSS only once.
  ...

* 'stable/xen.pm.bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: use freeze/restore/thaw PM events for suspend/resume/chkpt
  xen: xenbus PM events support

Merge branches 'stable/irq.fairness' and 'stable/irq.ween_of_nr_irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/irq.fairness' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: events: Remove redundant clear of l2i at end of round-robin loop
  xen: events: Make round-robin scan fairer by snapshotting each l2 word once only
  xen: events: Clean up round-robin evtchn scan.
  xen: events: Make last processed event channel a per-cpu variable.
  xen: events: Process event channels notifications in round-robin order.

* 'stable/irq.ween_of_nr_irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: events: Fix compile error if CONFIG_SMP is not defined.
  xen: events: correct locking in xen_irq_from_pirq
  xen: events: propagate irq allocation failure instead of panicking
  xen: events: do not workaround too-small nr_irqs
  xen: events: remove use of nr_irqs as upper bound on number of pirqs
  xen: events: dynamically allocate irq info structures
  xen: events: maintain a list of Xen interrupts
  xen: events: push setup of irq<->{evtchn,ipi,virq,pirq} maps into irq_info init functions
  xen: events: turn irq_info constructors into initialiser functions
  xen: events: use per-cpu variable for cpu_evtchn_mask
  xen: events: refactor GSI pirq bindings functions
  xen: events: rename restore_cpu_pirqs -> restore_pirqs
  xen: events: remove unused public functions
  xen: events: fix xen_map_pirq_gsi error return
  xen: events: simplify comment
  xen: events: separate two unrelated halves of if condition

Fix up trivial conflicts in drivers/xen/events.c