Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The comment for the deflate test vectors says the winbits parameter is 11,
while the deflate module actually uses -11 (a negative window bits parameter
enables the raw deflate format instead of the zlib format).
Correct this, to avoid confusion about the format used.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves the newly created alg_test infrastructure into
cryptomgr.  This shall allow us to use it for testing at algorithm
registrations.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If tcrypt is to be used as a run-time integrity test, it needs to be
more resilient in a hostile environment.  For a start allocating 32K
of physically contiguous memory is definitely out.

This patch teaches it to use separate pages instead.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Patch to add checking  of DES3 test vectors using CBC mode.  FIPS-140-2
compliance mandates that any supported mode of operation must include a self
test.  This satisfies that requirement for cbc(des3_ede).  The included test
vector was generated by me using openssl.  Key/IV was generated with the
following command:

	openssl enc -des_ede_cbc -P

input and output values were generated by repeating the string "Too many
secrets" a few times over, truncating it to 128 bytes, and encrypting it with
openssl using the aformentioned key.  Tested successfully by myself
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds test vectors for RIPEMD-256 and
RIPEMD-320 hash algorithms.

The test vectors are taken from
<http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
Signed-off-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change logs should be kept in source control systems, not the source.
This patch removes the change log from tcrpyt to stop people from
extending it any more.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds test vectors for RIPEMD-128 and
RIPEMD-160 hash algorithms and digests (HMAC).

The test vectors are taken from ISO:IEC 10118-3 (2004)
and RFC2286.
Signed-off-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Implement CTS wrapper for CBC mode required for support of AES
encryption support for Kerberos (rfc3962).
Signed-off-by: NKevin Coffman <kwc@citi.umich.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The third test vector of ECB-XTEA-ENC fails for me all other
are fine. I could not find a RFC or something else where they
are defined. The test vector has not been modified since git
started recording histrory. The implementation is very close
(not to say equal) to what is available as Public Domain (they
recommend 64 rounds and the in kernel uses 32). Therefore I
belive that there is typo somewhere and tcrypt reported always
*fail* instead of *okey*.
This patch replaces input + result of the third test vector with
result + input from the third decryption vector. The key is the
same, the other three test vectors are also the reverse.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently the tcrypt module is about 2 MiB on x86-32. The
main reason for the huge size is the data segment which contains
all the test vectors for each algorithm. The test vectors are
staticly allocated in an array and the size of the array has been
drastically increased by the merge of the Salsa20 test vectors.

With a hint from Benedigt Spranger I found a way how I could
convert those fixed-length arrays to strings which are flexible
in size. VIM and regex were also very helpfull :)
So, I am talking about a shrinking of ~97% on x86-32:

   text    data     bss     dec     hex filename
  18309 2039708      20 2058037  1f6735 tcrypt-b4.ko
  45628   23516      80   69224   10e68 tcrypt.ko
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The speed templates as it look always the same. The key size
is repeated for each block size and we test always the same
block size. The addition of one inner loop makes it possible
to get rid of the struct and it is possible to use a tiny
u8 array :)
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some crypto ciphers which are impleneted support similar key sizes
(16,24 & 32 byte). They can be grouped together and use a common
templatte instead of their own which contains the same data.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds 7 test vectors to tcrypt for CCM.
The test vectors are from rfc 3610.
There are about 10 more test vectors in RFC 3610
and 4 or 5 more in NIST. I can add these as time permits.

I also needed to set authsize. CCM has a prerequisite of
authsize. 
Signed-off-by: NJoy Latten <latten@austin.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a simple speed test for salsa20.
Usage: modprobe tcrypt mode=206
Signed-of-by: NTan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add LZO compression algorithm support
Signed-off-by: NZoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is a large test vector for Salsa20 that crosses the 4096-bytes
page boundary.
Signed-off-by: NTan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The crypto_aead convention for ICVs is to include it directly in the
output.  If we decided to change this in future then we would make
the ICV (if the algorithm has an explicit one) available in the
request itself.

For now no algorithm needs this so this patch changes gcm to conform
to this convention.  It also adjusts the tcrypt aead tests to take
this into account.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors to tcrypt for AES in CBC mode for key sizes 192 and 256.
The test vectors are copied from NIST SP800-38A.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a large AES CTR mode test vector. The test vector is
4100 bytes in size. It was generated using a C++ program that called
Crypto++.

Note that this patch increases considerably the size of "struct
cipher_testvec" and hence the size of tcrypt.ko.
Signed-off-by: NTan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add GCM/GMAC support to cryptoapi.

GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher
with a block size of 16.  The typical example is AES-GCM.
Signed-off-by: NMikko Herranen <mh1@iki.fi>
Reviewed-by: NMika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add AEAD support to tcrypt, needed by GCM.
Signed-off-by: NMikko Herranen <mh1@iki.fi>
Reviewed-by: NMika Kukkonen <mika.kukkonen@nsn.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch implements the Salsa20 stream cipher using the blkcipher interface.

The core cipher code comes from Daniel Bernstein's submission to eSTREAM:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/

The test vectors comes from:
  http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/

It has been tested successfully with "modprobe tcrypt mode=34" on an
UML instance.
Signed-off-by: NTan Swee Heng <thesweeheng@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Resubmitting this patch which extends sha256_generic.c to support SHA-224 as
described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231
is then supported through the hmac interface.

Patch includes test vectors for SHA-224 and HMAC-SHA-224.

SHA-224 chould be chosen as a hash algorithm when 112 bits of security
strength is required.

Patch generated against the 2.6.24-rc1 kernel and tested against
2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC.
Signed-off-by: NJonathan Lynch <jonathan.lynch@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch implements CTR mode for IPsec.
It is based off of RFC 3686.

Please note:
1. CTR turns a block cipher into a stream cipher.
Encryption is done in blocks, however the last block
may be a partial block.

A "counter block" is encrypted, creating a keystream
that is xor'ed with the plaintext. The counter portion
of the counter block is incremented after each block
of plaintext is encrypted.
Decryption is performed in same manner.

2. The CTR counterblock is composed of,
        nonce + IV + counter

The size of the counterblock is equivalent to the
blocksize of the cipher.
        sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize

The CTR template requires the name of the cipher
algorithm, the sizeof the nonce, and the sizeof the iv.
        ctr(cipher,sizeof_nonce,sizeof_iv)

So for example,
        ctr(aes,4,8)
specifies the counterblock will be composed of 4 bytes
from a nonce, 8 bytes from the iv, and 4 bytes for counter
since aes has a blocksize of 16 bytes.

3. The counter portion of the counter block is stored
in big endian for conformance to rfc 3686.
Signed-off-by: NJoy Latten <latten@austin.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.

XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
	http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.
Signed-off-by: NRik Snel <rsnel@cube.dyndns.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for the SEED cipher (RFC4269).

This patch have been used in few VPN appliance vendors in Korea for
several years.  And it was verified by KISA, who developed the
algorithm itself.

As its importance in Korean banking industry, it would be great
if linux incorporates the support.
Signed-off-by: NHye-Shik Chang <perky@FreeBSD.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the code of Camellia code for testing module.
Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a crypto module to provide FCrypt encryption as used by RxRPC.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds tests for SHA384 HMAC and SHA512 HMAC to the tcrypt module. Test data was taken from
RFC4231. This patch is a follow-up to the discovery (bug 7646) that the kernel SHA384 HMAC
implementation was not generating proper SHA384 HMACs.
Signed-off-by: NAndrew Donofrio <linuxbugzilla@kriptik.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Do modprobe tcrypt mode=10 to check the included test vectors, they are
from: http://grouper.ieee.org/groups/1619/email/pdf00017.pdf and from
http://www.mail-archive.com/stds-p1619@listserv.ieee.org/msg00173.html.

To make the last test vector fit, I had to increase the buffer size of
input and result to 512 bytes.
Signed-off-by: NRik Snel <rsnel@cube.dyndns.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

est vectors of XCBC with AES-128.
Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts tcrypt to use the new HMAC template rather than the
hard-coded version of HMAC.  It also converts all digest users to use
the new cipher interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that crc32c has been fixed to conform with standard digest semantics,
we can use test_hash for it.  I've turned the last test into a chunky
test.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds speed tests (benchmarks) for digest algorithms.
Tests are run with different buffer sizes (16 bytes, ... 8 kBytes)
and with each buffer multiple tests are run with different update()
sizes (e.g. hash 64 bytes buffer in four 16 byte updates).
There is no correctness checking of the result and all tests and
algorithms use the same input buffer.
Signed-off-by: NMichal Ludvig <michal@logix.cz>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Force 32-bit alignment on keys in tcrypt test vectors.  Also rearrange the
structure to prevent unnecessary padding.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add new test vectors to the AES test suite for AES CBC and AES with plaintext
larger than AES blocksize.
Signed-off-by: NJan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The XTEA implementation was incorrect due to a misinterpretation of
operator precedence.  Because of the wide-spread nature of this
error, the erroneous implementation will be kept, albeit under the
new name of XETA.
Signed-off-by: NAaron Grothe <ajgrothe@yahoo.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Reyk Floeter <reyk@vantronix.net>

I recently had the requirement to do some benchmarking on cryptoapi, and
I found reyk's very useful performance test patch [1].

However, I could not find any discussion on why that extension (or
something providing a similar feature but different implementation) was
not merged into mainline.  If there was such a discussion, can someone
please point me to the archive[s]?

I've now merged the old patch into 2.6.12-rc1, the result can be found
attached to this email.

[1] http://lists.logix.cz/pipermail/padlock/2004/000010.htmlSigned-off-by: NHarald Welte <laforge@gnumonks.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>