Replace mdelay() by msleep() in bus_suspend(); the rest of the system will
gain 7ms. The related code is reorganized to minimize the number of
locking/unlocking calls.

The last hunk of the patch is the formatting change by Lindent.
Signed-off-by: NOlav Kongas <ok@artecdesign.ee>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For some reason alpha doesn't include <linux/dma-mapping.h> where other
architectures do; this makes net2280 include it explicitly.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As there is no more usb devfs support, these bits would just confuse
people.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Some USB devices don't enumerate well with FSBR turned on.  This patch
keeps devices on the low-speed part of the schedule (which doesn't use
FSBR) until they have been fully configured.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds a reinitializion for the uf variable that got modified
by the preceding start-split bandwidth check.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

My earlier experiment (adding a clear-halt for the interrupt-in
endpoint)  failed.  It turns out that it does cause problems for other
devices.  And it wasn't needed anyway; a simple blacklist entry was
enough to get my HP keyboard working.

This patch (as643) removes the clear-halt call and adds the blacklist
entry.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add device support for a couple more Auerswald TK-devices.

Via Thomas Jackle <dj-tj@gmx.de>, typed in from
http://bugzilla.kernel.org/show_bug.cgi?id=5908.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch correct a possible bug with cmv_name being static. If there
is 2 modems and the driver is scheduled when filling cmv_name this could
result with garbage in cmv_name. We allocate cmv_name on the stack but
with a small size in order to avoid that.
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch is purely cosmetic. There is :
- indentation cleaning
- unneeded cast removing
- comments cleaning
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the support for isochronous pipe.

A new module parameter is added to select iso mode.  It is set to iso by
default because bulk mode doesn't work well at high speed rate (>3 Mbps
for upload).

We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to
ISO IN when it has nothing to send [1].

[1]
from cypress datasheet :

The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB
FX chip receives an isochronous IN token while the IN FIFO is empty. If
ISOSEND0=0 (the default value), the USB core does not respond to the IN
token. If ISOSEND0=1, the USB core sends a zero-length data packet in
response to the IN token. The action to take depends on the overall
system design. The ISOSEND0 Bit applies to all of the isochronous IN
endpoints, IN-8 through IN-15.
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is the usbatm part of the Arjan, Jes and Ingo
mass semaphore to mutex conversion, reworked to apply on top
of the patches I just sent to you.  This time, with correct
attribution and signed-off lines.
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't throttle on -EILSEQ urb status if requested by a minidriver.
It seems the ueagle modems are buggy, giving -EILSEQ when they
have no data to send.  The ueagle change will be sent separately
by the ueagle guys.  Patch by Matthieu Castet.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The receive logic has always assumed that urbs contain an integral
number of ATM cells, which is a bit naughty, though it never caused
any problems with bulk transfers.  Isochronous urbs spank us soundly
for this.  Fixed thanks to this patch, mostly by Stanislaw Gruszka.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

While the usbatm core has had some support for using isoc urbs
for some time, there was no way for users to turn it on.  While
use of isoc transfer should still be considered experimental, it
now works well enough to let users turn it on.  Minidrivers signal
to the core that they want to use isoc transfer by setting the new
UDSL_USE_ISOC flag.  The speedtch minidriver gets a new module
parameter enable_isoc (defaults to false), plus some logic that
checks for the existence of an isoc receive endpoint (not all
speedtouch modems have one).
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change the module parameters rcv_buf_size and snd_buf_size to
specify buffer sizes in bytes rather than ATM cells.  Since
there is some danger that users may not notice this change,
the parameters are renamed to rcv_buf_bytes etc.  The transmit
buffer needs to be a multiple of the ATM cell size in length,
while the receive buffer should be a multiple of the endpoint
maxpacket size (this wasn't enforced before, which causes trouble
with isochronous transfers), so enforce these restrictions.  Now
that the usbatm probe method inspects the endpoint maxpacket size,
minidriver bind routines need to set the correct alternate setting
for the interface in their bind routine.  This is the reason for
the speedtch changes.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In one spot (usbatm_cancel_send) we were calling dev_kfree_skb with irqs
disabled.  This mistake is just too easy to make, so systematically use
dev_kfree_skb_any rather than dev_kfree_skb.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We weren't always returning -ENOMEM.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch causes vcc_release_async to be applied to any open
vcc's when the modem is disconnected.  This signals a socket
shutdown, letting the socket user know that the game is up.
I wrote this patch because of reports that pppd would keep
connections open forever when the modem is disconnected.
This patch does not fix that problem, but it's a step in the
right direction.  It doesn't help because the pppoatm module
doesn't yet monitor state changes on the ATM socket, so simply
never realises that the ATM connection has gone down (meaning
it doesn't tell the ppp layer).  But at least there is a socket
state change now.  Unfortunately this patch may create problems
for those rare users like me who use routed IP or some other
non-ppp connection method that goes via the ATM ARP daemon: the
daemon is buggy, and with this patch will crash when the modem
is disconnected.  Users with a buggy atmarpd can simply restart
it after disconnecting the modem.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The xusbatm driver is for otherwise unsupported modems.
All it does is grab hold of a user-specified set of
interfaces - the generic usbatm core methods (hopefully)
do the rest.  As Aurelio Arroyo discovered when he tried
to use xusbatm (big mistake!), the interface grabbing logic
was completely borked.  Here is a rewrite that works.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert kmalloc + memset to kzalloc.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the unused .owner field in struct usbatm_driver.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Have minidrivers and the core signal special requirements
using a flags field in struct usbatm_data.  For the moment
this is only used to replace the need_heavy_init bind
parameter, but there'll be new flags in later patches.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Formatting, changes to variable names, comments, log level changes,
printk rate limiting.
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds a Video4Linux2 driver giving support
to ET61X151 and ET61X251 PC Camera Controllers made by
Etoms Electronics.
Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SN9C10x driver updates:

- Use kzalloc() instead of kmalloc()
- Move some macro definitions from sn9c102.h to sn9c102_core.c
- Use vfree() and vmalloc_32() instead of rvfree() and rvmalloc()
- Fix mmap() sys call
- Documentation updates
Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The attached patch adds four new device IDs for the CP2101 driver.
Also 3 tab characters have been removed from device ID table.
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NFALIPOU F Developer <fred.falipou@free.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added support for CA-42 clone cable (www.ca-42.com)
Signed-off-by: NMartin Gingras <martin.gingras@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch corrects the URB initialisation for transfers
like this is done in other drivers too.
Without this patch no data was transmitted on a PXA270 OHCI
platform. May apply to others too.
Signed-off-by: NJuergen Schindele <schindele@nentec.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add device IDs for the 0G0 Cable Ethernet device as reported by
Charles Lepple <clepple@gmail.com>.
Signed-off-by: NDavid Hollis <dhollis@davehollis.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

SN9C10x driver updates and bugfixes.

Changes: + new, - removed, * cleanup, @ bugfix:

@ fix poll()
@ Remove bad get_ctrl()'s
* Reduce ioctl stack usage
* Remove final ";" from some macro definitions
* Better support for SN9C103
+ Add sn9c102_write_regs()
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors
+ Provide support for the built-in microphone interface of the SN9C103
+ Documentation updates
+ Add 0x0c45/0x602e to the list of SN9C10x based devices
Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've been offered a nice Sony DSC-T5 digital camera, with a USB connection.
Unfortunately it is not recognized by Linux 2.6.14.4's usb-storage.

With the following change I'm able to mount and read my pictures:
Signed-off-by: NPhil Dibowitz <phil@ipom.com>

this fixes an oops with disconnection in acm.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this fixes
-potential hang by disconnecting through usbfs
-kzalloc
-general cleanup
-micro optimisation in interrupt handlers

It compiles and I am printing.
Signed-off-by: NOliver Neukum <oliver@neukum.name>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch from Bob Copeland adds support for the Rio Karma portable
digital audio player to the usb-storage driver.  The only thing needed to
support this device is a one-time (per plugin) init command which is sent
to the device.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This should fix things mentioned below:

	"I was curious why my firewall was loading a 'phone driver'.
	It turns out that the probing in the yealink driver is
	a little too assuming..

	static struct usb_device_id usb_table [] = {
	    { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
	    { }
	};

	So it picked up my UPS, and loaded the driver.
	Whilst no harm came, because it later checks the vendor/product IDs,
	this driver should probably be rewritten to only probe
	for the device IDs it actually knows about.

	Dave"
Signed-off-by: NHenk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Documentation: Specify grayscale specification on ATIK-ATK16
   and ATIK-ATK16HR comments.
New: Add ProductID and VendorID for devices ATIK-ATK16C and
   ATIK-ATK16HRC. These devices are also USB Astronomical CCD
   cameras that work through an FTDI 245BM chip, share the
   same base hardware but, it has a colour CCD chip instead
   of a grayscale one.
Signed-off-by: NRui Santos <rsantos@grupopie.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The attached patch adds a new PID for the ftdi_sio driver.  It will
enable support for PC-DJ's DAC-2 controller module
(more information on http://www.pcdjhardware.com/DAC2.asp)
Signed-off-by: NWouter Paesen <wouter@kangaroot.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>