In case we encounter an error during the mapping of a region, we want to
unwind what we've established so far exactly the way we did the mapping.
This is the PUD part kept deliberately small for easier review.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Handle last level by unconditionally writing the PTEs into the PTE page
while paying attention to the NX bit.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Handle PMD-level mappings the same as PUD ones.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add the next level of the pagetable populating function, we handle
chunks around a 1G boundary by mapping them with the lower level
functions - otherwise we use 1G pages for the mappings, thus using as
less amount of pagetable pages as possible.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This allocates, if necessary, and populates the corresponding PGD entry
with a PUD page. The next population level is a dummy macro which will
be removed by the next patch and it is added here to keep the patch
small and easily reviewable but not break bisection, at the same time.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This is preparatory work in order to be able to map pages into a
specified PGD and not implicitly and only into init_mm.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

... and lose one #ifdef .. #endif sandwich.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It's incredibly difficult to diagnose early EFI boot issues without
special hardware because earlyprintk=vga doesn't work on EFI systems.

Add support for writing to the EFI framebuffer, via earlyprintk=efi,
which will actually give users a chance of providing debug output.

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Remove a redundant memset() call from efi_relocate_kernel() that
was clearing memory that would be used by BSS in non-compressed
images loaded with this function.  This clear was redundant with
the clearing done in the image itself, and also implemented incorrectly
with a 0 length.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Incorrect use of 0 in terminating entry of arch_tables[] causes the
following sparse warning,

  arch/x86/platform/efi/efi.c:74:27: sparse: Using plain integer as NULL pointer

Replace with NULL.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
[ Included sparse warning in commit message. ]
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The problem in efi_main was that the idt was cleared before the
interrupts were disabled.

The UEFI spec states that interrupts aren't used so this shouldn't be
too much of a problem. Peripherals however don't necessarily know about
this and thus might cause interrupts to happen anyway. Even if
ExitBootServices() has been called.

This means there is a risk of an interrupt being triggered while the IDT
register is nullified and the interrupt bit hasn't been cleared,
allowing for a triple fault.

This patch disables the interrupt flag, while leaving the existing IDT
in place. The CPU won't care about the IDT at all as long as the
interrupt bit is off, so it's safe to leave it in place as nothing will
ever happen to it.

[ Removed the now unused 'idt' variable - Matt ]
Signed-off-by: NBart Kuivenhoven <bemk@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch fixes a problem with EFI memory maps larger than 128 entries
when booting using the EFI stub, which results in overflowing e820_map
in boot_params and an eventual halt when checking the map size in
sanitize_e820_map().

If the number of map entries is greater than what can fit in e820_map,
add the extra entries to the setup_data list using type SETUP_E820_EXT.
These extra entries are then picked up when the setup_data list is
parsed in parse_e820_ext().
Signed-off-by: NLinn Crosetto <linn@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

warnings from gcc:
warning: label 'free_pool' defined but not used [-Wunused-label]
warning: value computed is not used [-Wunused-value]
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

EFI calls can made directly on ARM, so the function pointers
are directly invoked.  This allows types to be checked at
compile time, so here we ensure that the parameters match
the function signature. The wrappers used by x86 prevent
any type checking.
Correct the type of chunksize to be based on native
width as specified by the EFI_FILE_PROTOCOL read()
function.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename variables to be not initrd specific, as now the function
loads arbitrary files.  This change is exclusively renames
and comment changes to reflect the generalization.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure.  For ARM, this will be used
to load a device tree blob in addition to initrd images.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Make efi_free() safely callable with size of 0, similar to free() being
callable with NULL pointers, and do nothing in that case.
Remove size checks that this makes redundant.  This also avoids some
size checks in the ARM EFI stub code that will be added as well.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Replace the open-coded memory map getting with the
efi_get_memory_map() that is now general enough to use.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add arguments for returning the descriptor version and also
the memory map key.  The key is required for calling
exit_boot_services().
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename function in preparation for making it more flexible
and sharing it.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Move the open-coded conversion to a shared function for
use by all architectures.  Change the allocation to prefer
a high address for ARM, as this is required to avoid conflicts
with reserved regions in low memory.  We don't know the specifics
of these regions until after we process the command line and
device tree.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename relocate_kernel() to efi_relocate_kernel(), and take
parameters rather than x86 specific structure.  Add max_addr
argument as for ARM we have some address constraints that we
need to enforce when relocating the kernel.  Add alloc_size
parameter for use by ARM64 which uses an uncompressed kernel,
and needs to allocate space for BSS.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The relocate_kernel() function will be generalized and used
by all architectures, as they all have similar requirements.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The efi_high_alloc() and efi_low_alloc() functions
use the EFI_ALLOCATE_ADDRESS option to the EFI
function allocate_pages(), which requires a minimum
of page alignment, and rejects all other requests.
The existing code could fail to allocate depending
on allocation size, as although repeated allocation
attempts were made, none were guaranteed to be page
aligned.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename them to be more similar, as low_free() could be used to free
memory allocated by both high_alloc() and low_alloc().
high_alloc() -> efi_high_alloc()
low_alloc()  -> efi_low_alloc()
low_free()   -> efi_free()
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add system table pointer argument to shared EFI stub related functions
so they no longer use a global system table pointer as they did when part
of eboot.c.  For the ARM EFI stub this allows us to avoid global
variables completely and thereby not have to deal with GOT fixups.
Not having the EFI stub fixup its GOT, which is shared with the
decompressor, simplifies the relocating of the zImage to a
bootable address.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

No code changes made, just moving functions and #define from x86 arch
directory to common location.  Code is shared using #include, similar
to how decompression code is shared among architectures.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The x86/AMD64 EFI stubs must use a call wrapper to convert between
the Linux and EFI ABIs, so void pointers are sufficient.  For ARM,
the ABIs are compatible, so we can directly invoke the function
pointers.  The functions that are used by the ARM stub are updated
to match the EFI definitions.
Also add some EFI types used by EFI functions.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Move efi-stub.txt out of x86 directory and into common directory
in preparation for adding ARM EFI stub support.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

efi_lookup_mapped_addr() is a handy utility for other platforms than
x86. Move it from arch/x86 to drivers/firmware. Add memmap pointer
to global efi structure, and initialise it on x86.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Common to (U)EFI support on all platforms is the global "efi" data
structure, and the code that parses the System Table to locate
addresses to populate that structure with.

This patch adds both of these to the global EFI driver code and
removes the local definition of the global "efi" data structure from
the x86 and ia64 code.

Squashed into one big patch to avoid breaking bisection.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

early_ioremap() on IA64 chooses its mapping type based on the EFI
memory map. This patch adds an alias "early_memremap()" to be used
where the targeted location is memory rather than an i/o device.
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This fixes the following sparse warning
drivers/firmware/efi/efivars.c:567:6: warning: symbol 'efivars_sysfs_exit' was not declared. Should it be static?
Signed-off-by: NBojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Pull SCSI fix from James Bottomley:
 "This is a bug fix for the pm80xx driver.  It turns out that when the
  new hardware support was added in 3.10 the IO command size was kept at
  the old hard coded value.  This means that the driver attaches to some
  new cards and then simply hangs the system"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] pm80xx: fix Adaptec 71605H hang

Pull x86 boot fix from Peter Anvin:
 "A single very small boot fix for very large memory systems (> 0.5T)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM

Pull slave-dma fix from Vinod Koul:
 "A fix for resolving TI_EDMA driver's build error in allmodconfig to
  have filter function built in""

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma/Kconfig: TI_EDMA needs to be boolean

Pull networking fixes from David Miller:

 1) There was a simplification in the ipv6 ndisc packet sending
    attempted here, which avoided using memory accounting on the
    per-netns ndisc socket for sending NDISC packets.  It did fix some
    important issues, but it causes regressions so it gets reverted here
    too.  Specifically, the problem with this change is that the IPV6
    output path really depends upon there being a valid skb->sk
    attached.

    The reason we want to do this change in some form when we figure out
    how to do it right, is that if a device goes down the ndisc_sk
    socket send queue will fill up and block NDISC packets that we want
    to send to other devices too.  That's really bad behavior.

    Hopefully Thomas can come up with a better version of this change.

 2) Fix a severe TCP performance regression by reverting a change made
    to dev_pick_tx() quite some time ago.  From Eric Dumazet.

 3) TIPC returns wrongly signed error codes, fix from Erik Hugne.

 4) Fix OOPS when doing IPSEC over ipv4 tunnels due to orphaning the
    skb->sk too early.  Fix from Li Hongjun.

 5) RAW ipv4 sockets can use the wrong routing key during lookup, from
    Chris Clark.

 6) Similar to #1 revert an older change that tried to use plain
    alloc_skb() for SYN/ACK TCP packets, this broke the netfilter owner
    mark which needs to see the skb->sk for such frames.  From Phil
    Oester.

 7) BNX2x driver bug fixes from Ariel Elior and Yuval Mintz,
    specifically in the handling of virtual functions.

 8) IPSEC path error propagations to sockets is not done properly when
    we have v4 in v6, and v6 in v4 type rules.  Fix from Hannes Frederic
    Sowa.

 9) Fix missing channel context release in mac80211, from Johannes Berg.

10) Fix network namespace handing wrt.  SCM_RIGHTS, from Andy
    Lutomirski.

11) Fix usage of bogus NAPI weight in jme, netxen, and ps3_gelic
    drivers.  From Michal Schmidt.

12) Hopefully a complete and correct fix for the genetlink dump locking
    and module reference counting.  From Pravin B Shelar.

13) sk_busy_loop() must do a cpu_relax(), from Eliezer Tamir.

14) Fix handling of timestamp offset when restoring a snapshotted TCP
    socket.  From Andrew Vagin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
  net: fec: fix time stamping logic after napi conversion
  net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay
  mISDN: return -EINVAL on error in dsp_control_req()
  net: revert 8728c544 ("net: dev_pick_tx() fix")
  Revert "ipv6: Don't depend on per socket memory for neighbour discovery messages"
  ipv4 tunnels: fix an oops when using ipip/sit with IPsec
  tipc: set sk_err correctly when connection fails
  tcp: tcp_make_synack() should use sock_wmalloc
  bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones
  ipv6: Don't depend on per socket memory for neighbour discovery messages
  ipv4: sendto/hdrincl: don't use destination address found in header
  tcp: don't apply tsoffset if rcv_tsecr is zero
  tcp: initialize rcv_tstamp for restored sockets
  net: xilinx: fix memleak
  net: usb: Add HP hs2434 device to ZLP exception table
  net: add cpu_relax to busy poll loop
  net: stmmac: fixed the pbl setting with DT
  genl: Hold reference on correct module while netlink-dump.
  genl: Fix genl dumpit() locking.
  xfrm: Fix potential null pointer dereference in xdst_queue_output
  ...