The Maxim MAX7359 is a I2C interfaced key switch controller which
provides microprocessors with management of up to 64 key switches.
This patch adds support for the MAX7359 key switch controller.
Signed-off-by: NKim Kyuwon <q1.kim@samsung.com>
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Driver for the keyboard hardware documented here:
	http://www.opencores.org/project,keyboardcontrollerSigned-off-by: NJavier Herrero <jherrero@hvsistemas.es>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now that input core takes care of restoring state of input devices
upon resume we don't need to do anything special here.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tested-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Adjust the way 'switch' statements were indented; make sure we stay
under 80 ciolumns.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Compaq Presario R4000-series laptops are not sending a "volume up button
release" and "volume down button release" signal in the PS/2 protocol for
atkbd. The URL below has some of confirmed reports:

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477Signed-off-by: NDave Andrews <jetdog330@hotmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There are more and more laptop requiring use of force_release quirk
for their multimedia and other specialized keys. Adding their DMI data
to the kernel is not sustainable; instead we will rely on help from
userspace (HAL) to do that for us.

This patch creates a new 'force_release' sysfs attribute (that belongs
to serio device to which keyboard is attached) which can be used to set
up force_release keymap. For example, Dell laptop owners might do:

echo 133-139,143,147 > /sys/devices/platform/i8042/serio0/force_release
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We should first check whether platform data is NULL or not, before
dereferencing it to get the keymap.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add a driver for the keypad controller on TWL4030 family chips.
These support up to an 8x8 key matrix.  The TWL4030 multifunction
chips are mostly used on OMAP3 (or OMAP 2430) based boards.

[dtor@mail.ru: switch to matrix-keypad framework, fix changing
keymap from userspace]
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Direct to fail2 to gpio_free() the KEY_STROBEs as well as the KEY_SENSEs.

[dtor@mail.ru: change keymap from unsigned int to unsigned short]
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.
Tested-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

hil_kbd and hil_ptr look like twins so it makes sense to combine them
into a single driver.

[deller@gmx.de: add MODULE_ALIAS() entry for mouse]
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Rename functions and variables from [hil_]kbd to [hil_]dev in
preparation of merging hil_kbd and hil_ptr.
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Stop abusing semaphore for waiting, use completion instead. Also handle
errors from input_register_device.
Tested-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Remove assumption on the shift and size of rows/columns form
matrix_keypad driver.
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We have a nice wrapper for that.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().

Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h
Tested-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Adjust the driver so EVIOCGKEYCODE/EVIOCSKEYCODE work.
Acked-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Netbooks based on the Soltech TA12 do not send a key release
for volume keys causing Linux to think the key is constantly
being pressed forever.

Added quirk data for forced release keys.

BugLink: https://bugs.launchpad.net//bugs/397499Signed-off-by: NJerone Young <jerone.young@canonical.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch enables forced releasing of the Fn+Volume hotkeys
on the Fujitsu Siemens Amilo Pi 3525 notebook.
Signed-off-by: NSimon Davie <nexx@nexxdesign.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Original patch by Marek Vasut, modified by Eric in:

1. use delayed work to simplify the debouncing
2. combine col_polarity/row_polarity into a single active_low field
3. use a generic bit array based XOR algorithm to detect key
   press/release, which should make the column assertion time
   shorter and code a bit cleaner
4. remove the ALT_FN handling, which is no way generic, the ALT_FN
   key should be treated as no different from other keys, and
   translation will be done by user space by commands like 'loadkeys'.
5. explicitly disable row IRQs and flush potential pending work,
   and schedule an immediate scan after resuming as suggested
   by Uli Luckas
6. incorporate review comments from many others

Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad
controller, I have to configure those pins as generic GPIO to use this
driver, works quite well, though), and Sharp Zaurus model SL-C7x0
and SL-C1000.

[dtor@mail.ru: fix error unwinding path, support changing keymap
 from userspace]
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Reviewed-by: NUli Luckas <u.luckas@road.de>
Reviewed-by: NRussell King <linux@arm.linux.org.uk>
Reviewed-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Hopefully it will reduce conflicts when merging patches.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The gpio_get_value function may sleep, so it should not be called in a
timer function. Move gpio_get_value calls to workqueue.
Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This reverts commit 0b346838.

This commit breaks GPIO debouncing by replacing the original mod_timer
with schedule_delayed_work in the interrupt handler. The latter does not
kick the timer further on GPIO line changes as it should to perform
debouncing.
Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The gpio_get_value function of I2C/SPI GPIO expander may sleep thus this
function call can not be called in a timer function.
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

lm8323 is the keypad driver used in n810 device.

[akpm@linux-foundation.org: coding-style fixes]
[dtor@mail.ru: various cleanups]
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Reviewed-by: NTrilok Soni <soni.trilok@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAdrian Batzill <agib@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix
peripheral. This driver is based on the pxa27x_keypad driver.

[dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed
		from userspace.]
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

disable_irq() waits for all running handlers to complete before
returning.  As such, if it's used to disable an interrupt from
that interrupt's handler it will deadlock.  This replaces the
dangerous instances with the _nosync() variant which doesn't have
this problem.
Signed-off-by: NBen Nizette <bn@niasdigital.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NBarry Carroll <baz8080@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>