- 15 10月, 2008 15 次提交
-
-
由 Marcelo Tosatti 提交于
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Examine guest pagetable and bring the shadow back in sync. Caller is responsible for local TLB flush before re-entering guest mode. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Ben-Ami Yassour 提交于
Based on a patch by: Kay, Allen M <allen.m.kay@intel.com> This patch enables PCI device assignment based on VT-d support. When a device is assigned to the guest, the guest memory is pinned and the mapping is updated in the VT-d IOMMU. [Amit: Expose KVM_CAP_IOMMU so we can check if an IOMMU is present and also control enable/disable from userspace] Signed-off-by: NKay, Allen M <allen.m.kay@intel.com> Signed-off-by: NWeidong Han <weidong.han@intel.com> Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NAmit Shah <amit.shah@qumranet.com> Acked-by: NMark Gross <mgross@linux.intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
These can help show whether a guest is making progress or not. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ben-Ami Yassour 提交于
Remove unused field: struct kvm_assigned_pci_dev assigned_dev from struct: struct kvm_assigned_dev_kernel Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dave Hansen 提交于
We're in a hot path. We can't use kmalloc() because it might impact performance. So, we just stick the buffer that we need into the kvm_vcpu_arch structure. This is used very often, so it is not really a waste. We also have to move the buffer structure's definition to the arch-specific x86 kvm header. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ben-Ami Yassour 提交于
Based on a patch from: Amit Shah <amit.shah@qumranet.com> This patch adds support for handling PCI devices that are assigned to the guest. The device to be assigned to the guest is registered in the host kernel and interrupt delivery is handled. If a device is already assigned, or the device driver for it is still loaded on the host, the device assignment is failed by conveying a -EBUSY reply to the userspace. Devices that share their interrupt line are not supported at the moment. By itself, this patch will not make devices work within the guest. The VT-d extension is required to enable the device to perform DMA. Another alternative is PVDMA. Signed-off-by: NAmit Shah <amit.shah@qumranet.com> Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NWeidong Han <weidong.han@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This can be used by kvm subsystems that are interested in when interrupts are acked, for example time drift compensation. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
As we execute real mode guests in VM86 mode, exception have to be reinjected appropriately when the guest triggered them. For this purpose the patch adopts the real-mode injection pattern used in vmx_inject_irq to vmx_queue_exception, additionally taking care that the IP is set correctly for #BP exceptions. Furthermore it extends handle_rmode_exception to reinject all those exceptions that can be raised in real mode. This fixes the execution of himem.exe from FreeDOS and also makes its debug.com work properly. Note that guest debugging in real mode is broken now. This has to be fixed by the scheduled debugging infrastructure rework (will be done once base patches for QEMU have been accepted). Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Similar to the exception queue, this hold interrupts that have been accepted by the virtual processor core but not yet injected. Not yet used. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Instead of processing nmi injection failure in the vm entry path, move it to the vm exit path (vm_complete_interrupts()). This separates nmi injection from nmi post-processing, and moves the nmi state from the VT state into vcpu state (new variable nmi_injected specifying an injection in progress). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
Move KVM trace definitions from x86 specific kvm headers to common kvm headers to create a cross-architecture numbering scheme for trace events. This means the kvmtrace_format userspace tool won't need to know which architecture produced the log file being processed. Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
As suggested by Avi, introduce accessors to read/write guest registers. This simplifies the ->cache_regs/->decache_regs interface, and improves register caching which is important for VMX, where the cost of vmcs_read/vmcs_write is significant. [avi: fix warnings] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 25 8月, 2008 1 次提交
-
-
由 Eduardo Habkost 提交于
vmlinux.lds expects the fixup code to be on a section named .fixup. The .text.fixup section is not mentioned on vmlinux.lds, and is included on the resulting vmlinux (just after .text) only because of ld heuristics on placing orphan sections. However, placing .text.fixup outside .text breaks the definition of _etext, making it exclude the .text.fixup contents. That makes .text.fixup be ignored by the kernel initialization code that needs to know about section locations, such as the code setting page protection bits. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 29 7月, 2008 1 次提交
-
-
由 Andrea Arcangeli 提交于
Synchronize changes to host virtual addresses which are part of a KVM memory slot to the KVM shadow mmu. This allows pte operations like swapping, page migration, and madvise() to transparently work with KVM. Signed-off-by: NAndrea Arcangeli <andrea@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 27 7月, 2008 1 次提交
-
-
由 Joerg Roedel 提交于
If NPT is enabled after loading both KVM modules on AMD and it should be disabled, both KVM modules must be reloaded. If only the architecture module is reloaded the behavior is undefined. With this patch it is possible to disable NPT only by reloading the kvm_amd module. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 23 7月, 2008 2 次提交
-
-
由 Vegard Nossum 提交于
This patch is the result of an automatic script that consolidates the format of all the headers in include/asm-x86/. The format: 1. No leading underscore. Names with leading underscores are reserved. 2. Pathname components are separated by two underscores. So we can distinguish between mm_types.h and mm/types.h. 3. Everything except letters and numbers are turned into single underscores. Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
-
由 Vegard Nossum 提交于
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
-
- 21 7月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
-tip testing found this build bug: arch/x86/kvm/built-in.o:(.text.fixup+0x1): relocation truncated to fit: R_X86_64_32 against `.text' arch/x86/kvm/built-in.o:(.text.fixup+0xb): relocation truncated to fit: R_X86_64_32 against `.text' arch/x86/kvm/built-in.o:(.text.fixup+0x15): relocation truncated to fit: R_X86_64_32 against `.text' arch/x86/kvm/built-in.o:(.text.fixup+0x1f): relocation truncated to fit: R_X86_64_32 against `.text' arch/x86/kvm/built-in.o:(.text.fixup+0x29): relocation truncated to fit: R_X86_64_32 against `.text' Introduced by commit 4ecac3fd. The problem is that 'push' will default to 32-bit, which is not wide enough as a fixup address. (and which would crash on any real fixup event even if it was wide enough) Introduce KVM_EX_PUSH to get the proper address push width on 64-bit too. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 7月, 2008 10 次提交
-
-
由 Avi Kivity 提交于
Fixes compilation with CONFIG_VMI enabled. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Laurent Vivier 提交于
This patch enables coalesced MMIO for x86 architecture. It defines KVM_MMIO_PAGE_OFFSET and KVM_CAP_COALESCED_MMIO. It enables the compilation of coalesced_mmio.c. Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Guillaume Thouvenin 提交于
Prefixes functions that will be exported with kvm_. We also prefixed set_segment() even if it still static to be coherent. signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: NLaurent Vivier <laurent.vivier@bull.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Add emulation for the memory type range registers, needed by VMware esx 3.5, and by pci device assignment. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This can be used to simplify the x86 instruction decoder. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
[avi: fix ia64 build breakage] Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Obsoleted by the vmx-specific per-cpu list. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
KVM turns off hardware virtualization extensions during reboot, in order to disassociate the memory used by the virtualization extensions from the processor, and in order to have the system in a consistent state. Unfortunately virtual machines may still be running while this goes on, and once virtualization extensions are turned off, any virtulization instruction will #UD on execution. Fix by adding an exception handler to virtualization instructions; if we get an exception during reboot, we simply spin waiting for the reset to complete. If it's a true exception, BUG() so we can have our stack trace. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The KVM MMU tries to detect when a speculative pte update is not actually used by demand fault, by checking the accessed bit of the shadow pte. If the shadow pte has not been accessed, we deem that page table flooded and remove the shadow page table, allowing further pte updates to proceed without emulation. However, if the pte itself points at a page table and only used for write operations, the accessed bit will never be set since all access will happen through the emulator. This is exactly what happens with kscand on old (2.4.x) HIGHMEM kernels. The kernel points a kmap_atomic() pte at a page table, and then proceeds with read-modify-write operations to look at the dirty and accessed bits. We get a false flood trigger on the kmap ptes, which results in the mmu spending all its time setting up and tearing down shadows. Fix by setting the shadow accessed bit on emulated accesses. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 25 6月, 2008 1 次提交
-
-
由 Gerd Hoffmann 提交于
This patch updates the kvm host code to use the pvclock structs. It also makes the paravirt clock compatible with Xen. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 04 5月, 2008 5 次提交
-
-
由 Andrea Arcangeli 提交于
This make sure not to schedule in atomic during fx_init. I also changed the name of fpu_init to fx_finit to avoid duplicating the name with fpu_init that is already used in the kernel, this makes grep simpler if nothing else. Signed-off-by: NAndrea Arcangeli <andrea@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
[aliguory: plug leak] Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Enable kvm_set_spte() to generate EPT entries. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
The function get_tdp_level() provided the number of tdp level for EPT and NPT rather than the NPT specific macro. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 27 4月, 2008 3 次提交
-
-
由 Marcelo Tosatti 提交于
So userspace can save/restore the mpstate during migration. [avi: export the #define constants describing the value] [christian: add s390 stubs] [avi: ditto for ia64] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
We wish to export it to userspace, so move it into the kvm namespace. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Feng (Eric) Liu 提交于
Trace markers allow userspace to trace execution of a virtual machine in order to monitor its performance. Signed-off-by: NFeng (Eric) Liu <eric.e.liu@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-