- 14 12月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
Query the length of the fmb and abort fmb registration if the size of the associated measurement block is too small. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 11月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
Use UIDs as domain numbers if the UID checking rules apply (in this case the FW guarantees uniqueness of these values). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 11月, 2016 3 次提交
-
-
由 Sebastian Ott 提交于
Get rid of a useless memset from dma_alloc. Users of dma_alloc who want zero initialized memory can get it by specifying __GFP_ZERO or use one of the zalloc variants. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We have 2 strategies to reduce the number of RPCIT instructions: * A HW feature indicated via the tlb_refresh bit allows us to omit RPCIT for invalid -> valid translation-table entry updates. * With "lazy flush" we omit RPCIT for valid -> invalid updates until we run out of dma addresses. When we have to reuse dma addresses we issue a global tlb flush using only one RPCIT instruction. Currently lazy flushing depends on tlb_refresh. Since there is no technical reason for this remove this dependency. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
__s390_dma_map_sg maps a dma-contiguous area. Although we only map whole pages we have to take into account that the area doesn't start or stop at a page boundary because we use the dma address to loop over the individual sg entries. Failing to do that might lead to an access of the wrong sg entry. Fixes: ee877b81 ("s390/pci_dma: improve map_sg") Reported-and-tested-by: NChristoph Raisch <raisch@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 12 11月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
gcc correctly warns about an incorrect use of the 'pa' variable in case we pass an empty scatterlist to __s390_dma_map_sg: arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg': arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a bogus initialization to the function to sanitize the debug output. I would have preferred a solution without the initialization, but I only got the report from the kbuild bot after turning on the warning again, and didn't manage to reproduce it myself. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 11月, 2016 1 次提交
-
-
由 Martin Schwidefsky 提交于
Rework atomic.h to make the low level functions avaible for use in other headers without using atomic_t, e.g. in bitops.h. Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 9月, 2016 5 次提交
-
-
由 Sebastian Ott 提交于
Lazy unmap (defer tlb flush after unmap until dma address reuse) can greatly reduce the number of RPCIT instructions in the best case. In reality we are often far away from the best case scenario because our implementation suffers from the following problem: To create dma addresses we maintain an iommu bitmap and a pointer into that bitmap to mark the start of the next search. That pointer moves from the start to the end of that bitmap and we issue a global tlb flush once that pointer wraps around. To prevent address reuse before we issue the tlb flush we even have to move the next pointer during unmaps - when clearing a bit > next. This could lead to a situation where we only use the rear part of that bitmap and issue more tlb flushes than expected. To fix this we no longer clear bits during unmap but maintain a 2nd bitmap which we use to mark addresses that can't be reused until we issue the global tlb flush after wrap around. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Split dma_update_trans into __dma_update_trans which handles updating the dma translation tables and __dma_purge_tlb which takes care of purging associated entries in the dma translation lookaside buffer. The map_sg API makes use of this split approach by calling __dma_update_trans once per physically contiguous address range but __dma_purge_tlb only once per dma contiguous address range. This results in less invocations of the expensive RPCIT instruction when using map_sg. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Our map_sg implementation mapped sg entries independently of each other. For ease of use and possible performance improvements this patch changes the implementation to try to map as many (likely physically non-contiguous) sglist entries as possible into a contiguous DMA segment. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Simplify the code we use to calculate dma addresses by putting everything related in a dma_alloc_address function. Also provide a dma_free_address counterpart. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We calculate dma addresses using an iommu bitmap. Since commit 69eea95c ("s390/pci_dma: fix DMA table corruption with > 4 TB main memory") we've made sure that addresses created using that bitmap are below the maximum reported by firmware. Thus the additional check for that address to be within range can be removed. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 8月, 2016 1 次提交
-
-
由 Martin Schwidefsky 提交于
The 'report_error' interface for PCI devices found on s390 can be used by a user space program to inject an adapter error notification. Add a new kernel interface zpci_report_error to allow a PCI device driver to inject these error notifications without a detour over user space. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 8月, 2016 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2016 1 次提交
-
-
由 Markus Elfring 提交于
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 28 6月, 2016 1 次提交
-
-
由 Heiko Carstens 提交于
Use only simple inline assemblies which consist of a single basic block if the register asm construct is being used. Otherwise gcc would generate broken code if the compiler option --sanitize-coverage=trace-pc would be used. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 13 6月, 2016 2 次提交
-
-
由 Sebastian Ott 提交于
When we use the iommu_area_alloc helper to get dma addresses we specify the boundary_size parameter but not the offset (called shift in this context). As long as the offset (start_dma) is a multiple of the boundary we're ok (on current machines start_dma always seems to be 4GB). Don't leave this to chance and specify the offset for iommu_area_alloc. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We don't have an architectural guarantee on the value of the dma offset but rely on it to be at least page aligned. Enforce page alignemt of start_dma. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 4月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
After a failure during registration of the dma_table (because of the function being in error state) we free its memory but don't reset the associated pointer to zero. When we then receive a notification from firmware (about the function being in error state) we'll try to walk and free the dma_table again. Fix this by resetting the dma_table pointer. In addition to that make sure that we free the iommu_bitmap when appropriate. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 4月, 2016 2 次提交
-
-
由 Sebastian Ott 提交于
Implement the function type specific function measurement block used in new machines. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Provide an report_error attribute to send an adapter-error notification associated with a PCI function. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 01 4月, 2016 1 次提交
-
-
由 Pierre Morel 提交于
The PCI function group 0 is a valid function group, it is wrong to reject it. Let's accept PCI function group 0. Signed-off-by: NPierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 3月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
The function measurement block must not cross a page boundary. Ensure that by raising the alignment requirement to the smallest power of 2 larger than the size of the fmb. Fixes: d0b08853 ("s390/pci: performance statistics and debug infrastructure") Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 07 3月, 2016 1 次提交
-
-
由 Martin Schwidefsky 提交于
Provide a user space interface to issue call logical-processor instructions. Only selected CLP commands are allowed, enough to get the full overview of the installed PCI functions. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 02 3月, 2016 1 次提交
-
-
由 Christian Borntraeger 提交于
As virtio-ccw will have dma ops, we can no longer default to the zPCI ones. Make use of dev_archdata to keep the dma_ops per device. The pci devices now use that to override the default, and the default is changed to use the noop ops for everything that does not specify a device specific one. To compile without PCI support we will enable HAS_DMA all the time, via the default config in lib/Kconfig. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NJoerg Roedel <jroedel@suse.de> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 2月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
For each PCI function we need to maintain arch specific data in struct zpci_dev which also contains a pointer to struct pci_dev. When a function is registered or deregistered (which is triggered by PCI common code) we need to adjust that pointer which could interfere with the machine check handler (triggered by FW) using zpci_dev->pdev. Since multiple instances of the same pdev could exist at a time this can't be solved with locking. Fix that by ditching the pdev pointer and use a bus walk to reach struct pci_dev (only one instance of a pdev can be registered at the bus at a time). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 1月, 2016 6 次提交
-
-
由 Sebastian Ott 提交于
Since each iomap_entry handles only one bar of one pci function (even when disjunct ranges of a bar are mapped) the sanity check in pci_iomap_range is not needed and can be removed. Also convert the remaining BUG_ONs to WARN_ONs. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We receive special notifications from firmware when an error was detected and a pci function became unusable. Set the error_state accordingly to give device drivers a hint that they don't need to try error recovery. Suggested-by: NAlexander Schmidt <alexschm@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Fix the check which bar space we should map to allow available bars only. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
On s390 we need to maintain a mapping between iomem addresses and arch specific function identifiers. Currently the mapping table is created as such that we could span the whole iomem address space. Since we can only map each bar space from each possible function we have an upper bound for the number of mapping entries. This reduces the size of the iomap from 256K to less than 4K (using the defconfig). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Most of the constants defined in pci_io.h depend on each other and thus can be calculated. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Provide and use a ZPCI_ADDR macro as the complement of ZPCI_IDX to get rid of some constants in the code. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 11月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
DMA addresses returned from map_page() are calculated by using an iommu bitmap plus a start_dma offset. The size of this bitmap is based on the main memory size. If we have more than (4 TB - start_dma) main memory, the DMA address calculation will also produce addresses > 4 TB. Such addresses cannot be inserted in the 3-level DMA page table, instead the entries modulo 4 TB will be overwritten. Fix this by restricting the iommu bitmap size to (4 TB - start_dma). Also set zdev->end_dma to the actual end address of the usable range, instead of the theoretical maximum as reported by the hardware, which fixes a sanity check in dma_map() and also the IOMMU API domain geometry aperture calculation. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 11月, 2015 3 次提交
-
-
由 Sebastian Ott 提交于
Improve debugging to find out what went wrong during a failed dma map/unmap operation. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We use lazy allocation for translation table entries but don't handle allocation (and other) failures during translation table updates. Handle these failures and undo translation table updates when it's meaningful. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Newly allocated translation table entries are flagged as invalid and protected. If an existing translation table entry is invalidated, the protection flag is left unchanged. If a page (with invalid and protection flag set) is accessed it's undefined which type of exception we'll receive. Make sure to always set the invalid flag only. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 10月, 2015 1 次提交
-
-
由 Sebastian Ott 提交于
zpci_err_insn writes stale stack content to the debugfs. Ensure that the struct in zpci_err_insn is ordered in a way that we don't have uninitialized holes in it. In addition to that add the packed attribute. Fixes: 3d8258e4 (s390/pci: move debug messages to debugfs) Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
This adds an IOMMU API implementation for s390 PCI devices. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 11 9月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-