- 16 10月, 2016 1 次提交
-
-
由 Javier Martinez Canillas 提交于
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 30 5月, 2016 1 次提交
-
-
由 Heiko Stuebner 提交于
io-voltage control is actually part of the grf, so move the node under the newly available grf simple-mfd. To minimize duplicate code, the core node and compatible property gets placed in the core rk3288.dtsi while the individual boards now only need to enable it and add the necessary supply properties. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 07 4月, 2016 1 次提交
-
-
由 Heiko Stuebner 提交于
Drop superfluous #address-cells and #size-cells, rename key-nodes to individual names and also use the key constants intead of numbers. Reported-by: NJulien Chauveau <chauveau.julien@gmail.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NRob Herring <robh@kernel.org>
-
- 27 3月, 2016 1 次提交
-
-
由 Shawn Lin 提交于
Only one of "broken-cd" and "non-removable" should be supplied according to Documentation/devicetree/bindings/mmc/mmc.txt. Obviously emmc and sdio-wifi are non-removable devices, while broken-cd is for removable device whose card detect pin is broken. Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 10 2月, 2016 1 次提交
-
-
由 Sudeep Holla 提交于
Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source. Few dts files assign value "1" to gpio-key,wakeup and in one instance a value "0" is assigned probably assuming it won't be enabled as a wakeup source. Since the presence of the boolean property indicates it is enabled, value of "0" have no value. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property which inturn fixes the above mentioned issue. Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 25 1月, 2016 1 次提交
-
-
由 Wadim Egorov 提交于
It seems some firefly boards need 12mA drive strength for sdmmc. Using 4mA/8mA drive strength will cause the kernel to fail to recognize the sd card correctly. Increased the sdmmc lines drive strength from 4mA to 12mA. Signed-off-by: NWadim Egorov <w.egorov@phytec.de> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 09 10月, 2015 2 次提交
-
-
由 Heiko Stuebner 提交于
Add the iodomains node and reference the correct regulator for each domain. This also includes adding the currently unused dvp regulators. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Heiko Stuebner 提交于
Fix some incorrect references to mmc regulators. vccio_wl for example is the io-voltage supply not the core supply of the wifi module itself, which is vbat_wl instead. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 16 7月, 2015 1 次提交
-
-
由 Heiko Stuebner 提交于
The memory node is supposed to contain a device_type property marking it as memory. The currently included boards miss this property. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 06 7月, 2015 1 次提交
-
-
由 Romain Perier 提交于
Adds ramp delay for the vdd_cpu output. It removes warning "ramp_delay not set" emitted by the function regulator_set_voltage_time_sel() by the same time, which floods kernel logs. Signed-off-by: NRomain Perier <romain.perier@gmail.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 27 4月, 2015 2 次提交
-
-
由 Heiko Stuebner 提交于
The tsadc is used to read cpu and gpu temperatures. Also enable it on the other rk3288 boards beside the evb using the cru reset settings. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Heiko Stuebner 提交于
We defined bindings for the supply handling of act8846 regulators now, so describe those on the firefly too. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 23 2月, 2015 2 次提交
-
-
由 Heiko Stuebner 提交于
This was left out of the original firefly board definition due to the ethernet support going completely through the network tree, making the underlying nodes unavailable. Now that everything is present enable the gmac on the firefly. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Heiko Stuebner 提交于
Enable the usb phys on the firefly board. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 30 1月, 2015 2 次提交
-
-
由 Heiko Stuebner 提交于
Currently the hdmi driver is using one of the soc i2c busses for ddc probing and while documentation always specifies i2c5 as hdmi-i2c it could very well be any other bus as well. Therefore this is a property of the board and should be specified there. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Heiko Stuebner 提交于
This enables the recently added display nodes on the firefly and evb, letting the boards output graphic data over the hdmi port. This includes enabling of i2c5 on the evb that is used for ddc probing and setting the lcd-regulators to always on until the hdmi driver learns about using them. Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
- 26 1月, 2015 1 次提交
-
-
由 FUKAUMI Naoki 提交于
This adds support for Firefly-RK3288, Rockchip RK3288 based development boards made by Firefly. There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is for the beta version, rk3288-firefly.dts is for the mass production version. Signed-off-by: NFUKAUMI Naoki <naobsd@gmail.com> [removed gmac reference, due to the gmac node going through the net-tree] Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-