Verified on mpc866ads. This version has muram and brg nodes added to dts
to get the things work.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org>

Only external interrupts in edge detect mode support ack operation.
Therefore, in most cases ack is not needed.  The patch makes ipic
ack only when it's needed.  This could boost over all system performance.
Signed-off-by: NLi Yang <leoli@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms.
This included added labels and cell-index properties for serial and
pci nodes.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Removed address fields in ethernet nodes
* Removed #address-cells, #size-cells from gianfar nodes
* Added cell-index to gianfar and ucc ethernet nodes
* Added enet[0..3] labels
* Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio"
* Removed device_type = "mdio"

The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo
but it is now considered deprecated.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Removed device_type = "i2c"
* Added missing second I2C controller on MPC8548 CDS, MPC8544 DS
* Added #address-cells, #size-cells, and cell-index where missing
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The addition of the aliases node is needed for U-Boot
and, eventually, cuImage, to help locate the proper
nodes reliably when using the libfdt approach.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

qe_setbrg() currently takes an integer to indicate the BRG number.  Change that
to take an enum qe_clock instead, since this enum is intended to represent
clock sources.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Updated guts_set_dmacr() to enumerate the DMA controllers at 0, instead of 1,
so that it now matches other related functions.  Added function
guts_set_pmuxcr_dma() to set the external DMA control bits in the PMUXCR
register of the global utilities structure.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The MPC837x MDS is a new member of Freescale MDS reference system.
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

These interrupts are introduced by the latest Freescale SoC
such as MPC837x.
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

isel (Integer Select) is a new user space instruction in the
PowerISA 2.04 spec.  Not all processors implement it so lets emulate
to ensure code built with isel will run everywhere.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* Added SPRN for new architectural features added for embedded:
	- Alternate Time Base (ATB, ATBL, ATBU)
	- Doorbell Interrupts (IVOR36, IVOR37)
	- SPRG8/9
	- External Proxy (EPR)
	- External PID load/store (EPLC, EPSC)

* Added BUCSR for Freescale Embedded Processors
* Moved around MAS7 so its in numeric order
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This makes the early debug option force the console loglevel
to the max.  The early debug option is meant to catch messages very
early in the kernel boot process, in many cases, before the kernel
has a chance to parse the "debug" command line argument.  Thus it
makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console
log level to the max at boot time.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds a variant of of_translate_address that uses the dma-ranges
property instead of "ranges", it's to be used by PCI code in parsing
the dma-ranges property.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This removes "volatile" from the MMIO pointer udbg_comport
in udbg_16550.c driver, it's useless and makes checkpatch.pl
complain when adding things to this file.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The 32 bits PCI code will display a rather scary error message

   PCI: Cannot allocate resource region N of device XXX

at boot when the existing setup of a device as left by the
firmware doesn't match the kernel needs and the device needs
to be moved.  This is often not an error at all, as the kernel
will generally easily reallocate the device elsewhere.

This changes the message to something less scary and lowers
its level from error to warning.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The 32-bit powerpc resource fixup code uses unsigned longs to do the
offsetting of resources which overflows on platforms such as 4xx where
resources can be 64 bits.

This fixes it by using resource_size_t instead.

However, the IO stuff does rely on some 32 bits arithmetic, so we hack
by cropping the result of the fixups for IO resources with a 32 bits
mask.

This isn't the prettiest but should work for now until we change the
32 bits PCI code to do IO mappings like 64 bits does, within a reserved
are of the kernel address space.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This merges the 32-bit and 64-bit implementations of
pci_process_bridge_OF_ranges().  The new function is cleaner than both
the old ones, and supports 64 bits ranges on ppc32 which is necessary
for the 4xx port.

It also adds some better (hopefully) output to the kernel log which
should help diagnose problems and makes better use of existing OF
parsing helpers (avoiding a few bugs of both implementations along
the way).

There are still a few unfortunate ifdef's but there is no way around
these for now at least not until some other bits of the PCI code are
made common.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This defines isa_mem_base on both 32 and 64 bits (it used to be 32 bits
only).  This avoids a few ifdef's in later patches and potentially can
allow support for VGA text mode on 64 bits powerpc.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This updates smu.h with several new commands, and adds parameter
descriptions for existing commands.
Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Now that earlier patches have switched the bootwrapper to using libfdt
for device tree manipulation, this patch removes the now unused
flatdevtree.c and related files.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This incorporates libfdt (from the source embedded in an earlier
commit) into the wrapper.a library used by the bootwrapper.  This
includes adding a libfdt_env.h file, which the libfdt sources need in
order to integrate into the bootwrapper environment, and a
libfdt-wrapper.c which provides glue to connect the bootwrapper's
abstract device tree callbacks to the libfdt functions.

In addition, this changes the various wrapper and platform files to
use libfdt functions instead of the older flatdevtree.c library.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This incorporates a copy of dtc libfdt into the kernel source, in
arch/powerpc/boot/libfdt.  This only imports the upstream sources
verbatim, later patches are needed to actually link it into the kernel
Makefiles.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There was only one global function in vpdinfo.c and it was only called
from pci.c, so merge them and make the function static.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This is a purely mechanical transformation.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds a bit more detail to the xmon SLB output.  When the valid
bit is set, this displays the ESID and VSID values, as well as
decoding the segment size -- 1T or 256M -- and displaying the LLP
bits.  This supresses the output for any slb entries that contain only
zeros.

sample output from power6 (1T segment support):
00 c000000008000000 40004f7ca3000500  1T  ESID=   c00000  VSID=       4f7ca3 LLP:100
01 d000000008000000 4000eb71b0000400  1T  ESID=   d00000  VSID=       eb71b0 LLP:  0
08 0000000018000000 0000c8499f8ccc80 256M ESID=        1  VSID=    c8499f8cc LLP:  0
09 00000000f8000000 0000d2c1a8e46c80 256M ESID=        f  VSID=    d2c1a8e46 LLP:  0
10 0000000048000000 0000ca87eab1dc80 256M ESID=        4  VSID=    ca87eab1d LLP:  0
43 cf00000008000000 400011b260000500  1T  ESID=   cf0000  VSID=       11b260 LLP:100

sample output from power5 (notice the non-valid but non-zero entries)
10 0000000008000000 00004fd0e077ac80 256M ESID=        0  VSID=    4fd0e077a LLP:  0
11 00000000f8000000 00005b085830fc80 256M ESID=        f  VSID=    5b085830f LLP:  0
12 0000000048000000 000052ce99fe6c80 256M ESID=        4  VSID=    52ce99fe6 LLP:  0
13 0000000018000000 000050904ed95c80 256M ESID=        1  VSID=    50904ed95 LLP:  0
14 cf00000008000000 0000d59aca40f500 256M ESID=cf0000000  VSID=    d59aca40f LLP:100
15 c000000078000000 000045cb97751500 256M ESID=c00000007  VSID=    45cb97751 LLP:100

Tested on power5 and power6.
Signed-Off-By: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently we hardwire the number of SLBs to 64, but PAPR says we
should use the ibm,slb-size property to obtain the number of SLB
entries.  This uses this property instead of assuming 64.  If no
property is found, we assume 64 entries as before.

This soft patches the SLB handler, so it shouldn't change performance
at all.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

so remove a firmware feature test.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

and it becomes clear that we should use zalloc_maybe_bootmem.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>