Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

for controllers which support either of the ioaccel transport methods.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NJoe Handzik <joseph.t.handzik@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Avoid excessive locking by using per-cpu variable for lockup_detected
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Now that we can allocate more than 4 reply queues (up to 64)
we shouldn't try to make them share the same allocation but
should allocate them separately.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

No sense having 8 or 16 reply queues if you only have 4 cpus,
and likewise no sense limiting to 8 reply queues if you have
many more cpus.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NScott Teel <scott.teel@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

They are not completely free of cost when disabled and
when enabled emitting debug output for every command
submitted produces far too much output to be useful.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

After 3.22 firmware, PMC firmware guys tell us the
previous 5 second delay after a reset now needs to
be 10 secs to avoid a PCIe error due to the driver
looking at the controller too soon after the reset.
Signed-off-by: NJustin Lindley <justin.lindley@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Treat the the data direction bits as a bit mask allowing both
READ and WRITE at the same time instead of testing for equality
to see if it's a exclusively a READ or a WRITE.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The fields "major", "max_outstanding", and "usage_count"
of struct ctlr_info were not used for anything.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reviewed-by: NMike Miller <michael.miller@canonical.com>
Reviewed-by: NWebb Scales <webb.scales@hp.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Matt Taggart reported that mvsas didn't bind to the Marvell
SAS controller on a Supermicro AOC-SAS2LP-MV8 board.

lspci reports it as:

01:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. Device [1b4b:9485] (rev 03)
        Subsystem: Marvell Technology Group Ltd. Device [1b4b:9485]
[...]

Add it to the device table as chip_9485.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Reported-by: NMatt Taggart <taggart@debian.org>
Tested-by: NMatt Taggart <taggart@debian.org>
Acked-By: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This reverts commit 11206081.

Based on comments from Mike Christie and Sony John-N.

Hi,

without this patch the istwiRWRequest->MsgContext is always set to zero,
this patch saves the MsgContext in a msgcontext variable and then restores
the value.
Thanks to  David Jeffery who found the issue and did the analysis.
Signed-off-by: NTomas Henzl <thenzl@redhat.com>
Acked-by: NDesai, Kashyap <Kashyap.Desai@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The acornscsi driver was added in v2.1.88. It has always #undef-ed
CONFIG_SCSI_ACORNSCSI_LINK near the top of acornscsi.c. And, just to be
sure, it has also always triggered a preprocessor error if
CONFIG_SCSI_ACORNSCSI_LINK was still defined. But, as far as I can see,
it has never even been possible to set SCSI_ACORNSCSI_LINK through
kconfig, or its predecessors, in the first place.

Let's remove the code involved.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is the delta between the two submissions:
[PATCH 00/12] scsi/NCR5380: fix debugging macros and #include structure
and
[PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure

The macro definition changes were discussed on the mailing list during
review. The idea is to get the compiler to check the parameters of
disabled printk() calls so that the debugging code doesn't rot again.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Reusing a msg frame quickly means it's still cache-hot.  This yields
a small but noticable performance improvement in a well-known database
benchmark.  This improvement is already present in the mpt3sas driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Reusing a smid quickly means it's still cache-hot.  This yields a small
but noticable performance improvement in a well-known database benchmark.
This improvement is already present in the mpt3sas driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The mpt2sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Removing the host_lock from the I/O submission path gives a huge
scalability improvement.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The mpt3sas_scsih_issue_tm() function does not use the 'serial_number'
argument passed to it.  Removing it removes the last vestiges of the
scsi_cmnd's serial_number field from this driver.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: NPraveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com>
Acked-by: NSreekanth Reddy <Sreekanth.reddy@lsi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Acked-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Acked-by: NVikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There are missing curly braces here so it prints that the recovery
failed even when it succeeded.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Acked-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 Bumping the driver version.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 During heavy IO in multipath environment with many active sessions
 and port-bouncing happening, there is a race condition because of
 which beiscsi_prcess_cqe() gets called for a connection whose
 endpoint is freed.

 Checking endpoint reference for a connection before processing in
 beiscsi_process_cq().
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 EQ teardown should happen only after all CQ are destroyed.
 In some FW config, adapter goes into a freeze state. This
 fix moves teardown of MCC-Q before the EQ teardown happens.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 From: Dan Carpenter [mailto:dan.carpenter@oracle.com]
 Sent: Friday, March 28, 2014 1:42 AM
 Subject: re: [SCSI] be2iscsi: Fix handling timed out MBX completion from FW

 Hello Jayamohan Kallickal,

 The patch 1957aa7f: "[SCSI] be2iscsi: Fix handling timed out MBX completion from FW" from Jan 29, 2014, leads to the following static checker warning:

 drivers/scsi/be2iscsi/be_main.c:5581 beiscsi_dev_probe()
 error: memset() '&phba->ctrl.ptag_state[i]->tag_mem_state' too small (24 vs 32)

 drivers/scsi/be2iscsi/be_main.c
 5576          for (i = 0; i < MAX_MCC_CMD; i++) {
 5577                  init_waitqueue_head(&phba->ctrl.mcc_wait[i + 1]);
 5578                  phba->ctrl.mcc_tag[i] = i + 1;
 5579                  phba->ctrl.mcc_numtag[i + 1] = 0;
 5580                  phba->ctrl.mcc_tag_available++;
 5581                  memset(&phba->ctrl.ptag_state[i].tag_mem_state, 0,
 5582                         sizeof(struct beiscsi_mcc_tag_state));
                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Probably this this be change to sizeof(struct be_dma_mem struct)?  It looks like we are corrupting memory a bit here.

 5583          }

 regards,
 dan carpenter
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 SKH-R adapter, TCP Window Size/Scale parameters are passed
 in TCP Connection Offload Mbx Command.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 Before probe for function was completed, iSCSI Daemon had initiated login
 to target while OS was coming up. The targets which had node.startup=automatic,
 login process was initiated.Since function specific initialization was still in
 progress this lead to kernel panic.

 Fixed the issue by moving iscsi_host_add() call after adapter initialization
 is done.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 Getting WRB for MCCQ posting was done before looking if tag is
 available or not. This lead to increase phba->ctrl.mcc_obj.q.used
 variable and the WARN_ON message was coming from wrb_from_mccq().
 Moved getting wrb from mccq after checking for the tag.

 In wrb_from_mccq(), memset is done before returning wrb ptr.
 Removed memset of mccq wrb from all other functions.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Error handling in UFS driver is broken and resets the host controller
for fatal errors without re-initialization. Correct the fatal error
handling sequence according to UFS Host Controller Interface (HCI)
v1.1 specification.

o Processed requests which are completed w/wo error are reported to
  SCSI layer and any pending commands that are not started are aborted
  in the controller and re-queued into scsi mid-layer queue.

o Upon determining fatal error condition the host controller may hang
  forever until a reset is applied. Block SCSI layer for sending new
  requests and apply reset in a separate error handling work.

o SCSI is informed about the expected Unit-Attention exception from the
  device for the immediate command after a reset so that the SCSI layer
  take necessary steps to establish communication with the device.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: NYaniv Gardi <ygardi@codeaurora.org>
Tested-by: NDolev Raviv <draviv@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

As of now SCSI initiated error handling is broken because,
the reset APIs don't try to bring back the device initialized and
ready for further transfers.

In case of timeouts, the scsi error handler takes care of handling aborts
and resets. Improve the error handling in such scenario by resetting the
device and host and re-initializing them in proper manner.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: NYaniv Gardi <ygardi@codeaurora.org>
Tested-by: NDolev Raviv <draviv@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There is a possible race condition in the hardware when the abort
command is issued to terminate the ongoing SCSI command as described
below:

- A bit in the door-bell register is set in the controller for a
  new SCSI command.
- In some rare situations, before controller get a chance to issue
  the command to the device, the software issued an abort command.
- If the device recieves abort command first then it returns success
  because the command itself is not present.
- Now if the controller commits the command to device it will be
  processed.
- Software thinks that command is aborted and proceed while still
  the device is processing it.
- The software, controller and device may go out of sync because of
  this race condition.

To avoid this, query task presence in the device before sending abort
task command so that after the abort operation, the command is guaranteed
to be non-existent in both controller and the device.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: NYaniv Gardi <ygardi@codeaurora.org>
Tested-by: NDolev Raviv <draviv@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Currently, sending Task Management (TM) command to the card might
be broken in some scenarios as listed below:

Problem: If there are more than 8 TM commands the implementation
         returns error to the caller.
Fix:     Wait for one of the slots to be emptied and send the command.

Problem: Sometimes it is necessary for the caller to know the TM service
         response code to determine the task status.
Fix:     Propogate the service response to the caller.

Problem: If the TM command times out no proper error recovery is
         implemented.
Fix:     Clear the command in the controller door-bell register, so that
         further commands for the same slot don't fail.

Problem: While preparing the TM command descriptor, the task tag used
         should be unique across SCSI/NOP/QUERY/TM commands and not the
	 task tag of the command which the TM command is trying to manage.
Fix:     Use a unique task tag instead of task tag of SCSI command.

Problem: Since the TM command involves H/W communication, abruptly ending
         the request on kill interrupt signal might cause h/w malfunction.
Fix:     Wait for hardware completion interrupt with TASK_UNINTERRUPTIBLE
         set.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Reviewed-by: NYaniv Gardi <ygardi@codeaurora.org>
Tested-by: NDolev Raviv <draviv@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make undeclared functions static and declare exported symbols
to suppress warnings from sparse tool.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix many warnings with incorrect endian assumptions
which makes the code unportable to new architectures.

The UFS specification defines the byte order as big-endian
for UPIU structure and little-endian for the host controller
transfer/task management descriptors.
Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: NVinayak Holikatti <vinholikatti@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>