While testing HDMI with Xorg on the Juno board, I find that when Xorg
starts up or shuts down, the display is shifted significantly to the
right and wrapped in the active region.  (No sync bars are visible.)
The timings are correct, it behaves as if the start address has been
shifted many pixels _into_ the framebuffer.

This occurs whenever the display mode size is changed - using xrandr
in Xorg shows that changing the resolution triggers the problem
almost every time, but changing the refresh rate does not.

Using devmem2 to disable and re-enable the HDLCD resolves the issue,
and repeated disable/enable cycles do not make the issue re-appear.
Further debugging shows that we try to update the controller
configuration while enabled.

Alwys ensure that the HDLCD is disabled prior to updating the
controller timings, and use drm_crtc_vblank_off()/drm_crtc_vblank_on()
so that DRM knows whether it can expect vblank interrupts.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Harden the plane_check() code to drop attempts at scaling because
that is not supported. Make hdlcd_plane_atomic_update() set the pitch
and line length registers that correctly reflect the plane's values.
And make hdlcd_crtc_mode_set_nofb() a helper function for
hdlcd_crtc_enable() rather than an exposed hook.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

event_list just reimplemented what drm_crtc_arm_vblank_event does. And
we also need to send out drm events when shutting down a pipe.

With this it's possible to use the new nonblocking commit support in
the helpers.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Because the HDLCD driver acts as a component master it can end
up enabling the runtime PM functionality before the encoders
are initialised. This can cause crashes if the component slave
never probes (missing module) or if the PM operations kick in
before the probe finishes.

Move the enabling of the runtime PM after the component master
has finished collecting the slave components and use the DRM
atomic helpers to suspend and resume the device.
Tested-by: NRobin Murphy <Robin.Murphy@arm.com>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Those are all no longer needed for a pure atomic driver.

Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Tested-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-17-git-send-email-daniel.vetter@ffwll.ch

The HDLCD controller is a display controller that supports resolutions
up to 4096x4096 pixels. It is present on various development boards
produced by ARM Ltd and emulated by the latest Fast Models from the
company.

Cc: David Airlie <airlied@linux.ie>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>
[Kconfig cleanup and !CONFIG_PM fixes]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>