When configured with CONFIG_PPC_EARLY_DEBUG_OPAL=y the kernel expects
the OPAL entry and base addresses to be passed in r8 and r9
respectively. Currently the wrapper does not attempt to restore these
values before entering the decompressed kernel which causes the kernel
to branch into whatever happens to be in r9 when doing a write to the
OPAL console in early boot.

This patch adds a platform_ops hook that can be used to branch into the
new kernel. The OPAL console driver patches this at runtime so that if
the console is used it will be restored just prior to entering the
kernel.

Fixes: 656ad58e ("powerpc/boot: Add OPAL console to epapr wrappers")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently the powerpc boot wrapper has its own wrapper around zlib to
handle decompressing gzipped kernels. The kernel decompressor library
functions now provide a generic interface that can be used in the
pre-boot environment. This allows boot wrappers to easily support
different compression algorithms. This patch converts the wrapper to use
this new API, but does not add support for using new algorithms.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds an OPAL console backend to the powerpc boot wrapper so
that decompression failures inside the wrapper can be reported to the
user. This is important since it typically indicates data corruption in
the firmware and other nasty things.

Currently this only works when building a little endian kernel. When
compiling a 64 bit BE kernel the wrapper is always build 32 bit to be
compatible with some 32 bit firmwares. BE support will be added at a
later date. Another limitation of this is that only the "raw" type of
OPAL console is supported, however machines that provide a hvsi console
also provide a raw console so this is not an issue in practice.
Actually-written-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
[mpe: Move #ifdef __powerpc64__ to avoid warnings on 32-bit]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On some platforms a 5 second timeout during boot might be quite long, so
make it configurable. Run the loop at least once to let the user stop
the boot by holding a key pressed. If the timeout is set to 0, don't
wait for input, which can be used as a workaround if the boot hangs on
random data coming in on the serial port.
Signed-off-by: NSimon Kagstrom <simon.kagstrom@netinsight.net>
[mpe: Changelog wording & whitespace]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Bump the boot wrapper BOOT_COMMAND_LINE_SIZE to match the
kernel.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have two definitions of COMMAND_LINE_SIZE, one for the kernel
and one for the boot wrapper. I assume this is so the boot
wrapper can be self sufficient and not rely on kernel headers.

Having two defines with the same name is confusing, I just
updated the wrong one when trying to bump it.

Make the boot wrapper define unique by calling it
BOOT_COMMAND_LINE_SIZE.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some platforms have variants that can share most of a flat device tree but need
a few devices selectively pruned at boot time.  This adds del_node() to ops.h
to allow access to the existing fdt_del_node().
Signed-off-by: NMike Ditto <mditto@consentry.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds a new generic device tree processing function that retrieves
virtual reg addresses from the device tree to the bootwrapper code. It also
updates the bootwrapper code to use the new function.

dt_get_virtual_reg() retrieves the virtual reg addresses from the
"virtual-reg" property. If the property can't be found, it uses the "reg"
property and walks the tree to translate it to absolute addresses.
Signed-off-by: NLaurent Pinchart <laurentp@cse-semaphore.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add the ability to find a device node by just what its compatible with.
This is useful in cases that we don't have a prop to find the node with.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add the ability to set the mac address given the alias for the device.
Removes the need for having a linux,network-index property.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Now that earlier patches have switched the bootwrapper to using libfdt
for device tree manipulation, this patch removes the now unused
flatdevtree.c and related files.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This incorporates libfdt (from the source embedded in an earlier
commit) into the wrapper.a library used by the bootwrapper.  This
includes adding a libfdt_env.h file, which the libfdt sources need in
order to integrate into the bootwrapper environment, and a
libfdt-wrapper.c which provides glue to connect the bootwrapper's
abstract device tree callbacks to the libfdt functions.

In addition, this changes the various wrapper and platform files to
use libfdt functions instead of the older flatdevtree.c library.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Allows the bootwrapper to use the uartlite device for console output.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

This allows callers to set addresses one at a time when that would be more
convenient.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This will be used by the PlanetCore firmware support to construct
a linux,stdout-path from the serial node that it finds.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This allows booting on legacy, non-device-tree aware versions of U-boot.

It also fixes up the hardware to match the PCI and chipselect information
in the device tree, as u-boot is inconsistent in setting these up
correctly (or at all).
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Most of these were previously used by numerous C files and
redeclared in each one.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This serial port is used on all 8xx, many 82xx, and some 85xx chips.

The driver requires that the port has already been set up by the firmware
and/or platform code.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Declarations in various users are removed.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This can be used rather than doing a simple strcmp, which will fail to
handle multiple compatible entries.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This lets udelay() work properly on platforms which use dt_fixup_cpu_clocks.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For the convenience of custom platform code make the powerpc
bootwrapper typdef kernel_entry_t global in scope.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fixes the constantness of the powerpc bootwrapper's console_ops.write
routine.  Allows printing of constant strings.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The bootwrapper requires a serial driver to allow cmdline editing
and information reporting on the console.  This driver is required
by platforms that boot a zImage and use the MPSC for the console.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

dt_xlate_reg() looks up the 'reg' property in the specified node
to get the address and size to translate.  Add dt_xlate_addr()
which is passed in the address and size to translate.
Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use `unsigned long' for malloc sizes, to match common practice and types used
by most callers and callees.
Also use `unsigned long' for integers representing pointers in simple_alloc.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NMark A. Greer <mgreer@mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

dt_xlate_reg() uses the ranges properties of a node's parentage to find
the absolute physical address of the node's registers.

The ns16550 driver uses this when no virtual-reg property is found.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This cleans up how the zImage code manipulates the kernel
command line.  Notable improvements from the old handling:
	- Command line manipulation is consolidated into a new
prep_cmdline() function, rather than being scattered across start()
and some helper functions
	- Less stack space use: we use just a single global command
line buffer, which can be initialized by an external tool as before,
we no longer need another command line sized buffer on the stack.
	- Easier to support platforms whose firmware passes a
commandline, but not a device tree.  Platform code can now point new
loader_info fields to the firmware's command line, rather than having
to do early manipulation of the /chosen bootargs property which may
then be rewritten again by the core.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds a library of useful device tree manipulation functions
to the zImage library, for use by platform code.  These functions are
based on the hooks already in dt_ops, so they're not dependent on a
particular device tree implementation.  This patch also slightly
streamlines the code in main.c using these new functions.

This is a consolidation of my work in this area with Scott Wood's
patches to a very similar end.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds a reg.h to the zImage code, with common definitions
for accessing system registers.  For now, this includes functions for
retrieving the PVR and the stack pointer.  This patch then uses the
new reg.h to let start() display the running stack address without
having to explicitly pass the stack as a parameter from the asm code.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a macro fatal that calls printf then exit.  User must include stdio.h.

Typically replaces 3 lines with 1, although I added back some whitespace.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Move the declaration of flush_cache to ops.h for use by platform code.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add get_parent, create_node, and find_node_by_prop_value to dt_ops.
Currently only implemented by flatdevtree_misc.

Also, add a _str convenience wrapper for setprop.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

ops.h references NULL, so include stddef.h, so files including ops.h
don't have to.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Acked-by: NMark A. Greer <mgreer@mvista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch re-organises the way the zImage wrapper code is entered, to
allow more flexibility on platforms with unusual entry conditions.
After this patch, a platform .o file has two options:

1) It can define a _zimage_start, in which case the platform code gets
   control from the very beginning of execution.  In this case the
   platform code is responsible for relocating the zImage if necessary,
   clearing the BSS, performing any platform specific initialization, and
   finally calling start() to load and enter the kernel.

2) It can define platform_init().  In this case the generic crt0.S
   handles initial entry, and calls platform_init() before calling
   start().  The signature of platform_init() is changed, however, to
   take up to 5 parameters (in r3..r7) as they come from the platform's
   initial loader, instead of a fixed set of parameters based on OF's
   usage.

   When using the generic crt0.S, the platform .o can optionally
   supply a custom stack to use, using the BSS_STACK() macro.  If this
   is not supplied, the crt0.S will assume that the loader has
   supplied a usable stack.

In either case, the platform code communicates information to the
generic code (specifically, a PROM pointer for OF systems, and/or an
initrd image address supplied by the bootloader) via a global
structure "loader_info".

In addition the wrapper script is rearranged to ensure that the
platform .o is always linked first.  This means that platforms where
the zImage entry point is at a fixed address or offset, rather than
being encoded in the binary header can be supported using option (1).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch rewrites prep_kernel() in the zImage wrapper code to be
clearer and more flexible.  Notable changes:

	- Handling of the initrd image from prep_kernel() has moved
into a new prep_initrd() function.
	- The address of the initrd image is now added as device tree
properties, as the kernel expects.
	- We only copy a packaged initrd image to a new location if it
is in danger of being clobbered when the kernel moves to its final
location, instead of always.
	- By default we decompress the kernel directly to address 0,
instead of requiring it to relocate itself.  Platforms (such as OF)
where doing this could clobber still-live firmware data structures can
override the vmlinux_alloc hook to provide an alternate place to
decompress the kernel.
	- We no longer pass lots of information between functions in
global variables.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This makes 2 changes to clean up the flat device tree handling
logic in the zImage wrapper.

First, there were two callbacks from the dt_ops structure used for
producing a final flat tree to pass to the kerne: dt_ops.ft_pack()
which packed the flat tree (possibly a no-op) and dt_ops.ft_addr()
which retreived the address of the final blob.  Since they were only
ever called together, this patch combines the two into a single new
callback, dt_ops.finalize().  This new callback does whatever
platform-dependent things are necessary to produce a final flat device
tree blob, and returns the blob's addres.

Second, the current logic calls the kernel with a flat device tree if
one is build into the zImage wrapper, otherwise it boots the kernel
with a PROM pointer, expecting the kernel to copy the OF device tree
itself.  This approach precludes the possibility of the platform
wrapper code building a flat device tree from whatever
platform-specific information firmware provides.  Thus, this patch
takes the more sensible approach of invoking the kernel with a flat
tree if the dt_ops.finalize callback provides one (by whatever means).

So, the dt_ops.finalize callback can be NULL, or can be a function
which returns NULL.  In either case, the zImage wrapper logic assumes
that this is a platform with OF and invokes the kernel accordingly.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>