- 20 8月, 2018 2 次提交
-
-
由 Arnd Bergmann 提交于
timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64() for consistency with the other ktime_get_* access functions. Rename the new caller that has come up as well. Question: this is the only ptp driver that sets the hardware time to the current system time in TAI. Why does it do that? Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Recently, ops->init() and ops->dump() of all actions were modified to always obtain tcf_lock when accessing private action state. Actions that don't depend on tcf_lock for synchronization with their data path use non-bh locking API. However, tcf_lock is also used to protect rate estimator stats in softirq context by timer callback. Change ops->init() and ops->dump() of all actions to disable bh when using tcf_lock to prevent deadlock reported by following lockdep warning: [ 105.470398] ================================ [ 105.475014] WARNING: inconsistent lock state [ 105.479628] 4.18.0-rc8+ #664 Not tainted [ 105.483897] -------------------------------- [ 105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0 [ 105.509696] {SOFTIRQ-ON-W} state was registered at: [ 105.514925] _raw_spin_lock+0x2c/0x40 [ 105.519022] tcf_bpf_init+0x579/0x820 [act_bpf] [ 105.523990] tcf_action_init_1+0x4e4/0x660 [ 105.528518] tcf_action_init+0x1ce/0x2d0 [ 105.532880] tcf_exts_validate+0x1d8/0x200 [ 105.537416] fl_change+0x55a/0x268b [cls_flower] [ 105.542469] tc_new_tfilter+0x748/0xa20 [ 105.546738] rtnetlink_rcv_msg+0x56a/0x6d0 [ 105.551268] netlink_rcv_skb+0x18d/0x200 [ 105.555628] netlink_unicast+0x2d0/0x370 [ 105.559990] netlink_sendmsg+0x3b9/0x6a0 [ 105.564349] sock_sendmsg+0x6b/0x80 [ 105.568271] ___sys_sendmsg+0x4a1/0x520 [ 105.572547] __sys_sendmsg+0xd7/0x150 [ 105.576655] do_syscall_64+0x72/0x2c0 [ 105.580757] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 105.586243] irq event stamp: 489296 [ 105.590084] hardirqs last enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40 [ 105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50 [ 105.609277] softirqs last enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0 [ 105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190 [ 105.626813] other info that might help us debug this: [ 105.633976] Possible unsafe locking scenario: [ 105.640526] CPU0 [ 105.643325] ---- [ 105.646125] lock(&(&p->tcfa_lock)->rlock); [ 105.650747] <Interrupt> [ 105.653717] lock(&(&p->tcfa_lock)->rlock); [ 105.658514] *** DEADLOCK *** [ 105.665349] 1 lock held by swapper/16/0: [ 105.669629] #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550 [ 105.678200] stack backtrace: [ 105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664 [ 105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 105.698626] Call Trace: [ 105.701421] <IRQ> [ 105.703791] dump_stack+0x92/0xeb [ 105.707461] print_usage_bug+0x336/0x34c [ 105.711744] mark_lock+0x7c9/0x980 [ 105.715500] ? print_shortest_lock_dependencies+0x2e0/0x2e0 [ 105.721424] ? check_usage_forwards+0x230/0x230 [ 105.726315] __lock_acquire+0x923/0x26f0 [ 105.730597] ? debug_show_all_locks+0x240/0x240 [ 105.735478] ? mark_lock+0x493/0x980 [ 105.739412] ? check_chain_key+0x140/0x1f0 [ 105.743861] ? __lock_acquire+0x836/0x26f0 [ 105.748323] ? lock_acquire+0x12e/0x290 [ 105.752516] lock_acquire+0x12e/0x290 [ 105.756539] ? est_fetch_counters+0x3c/0xa0 [ 105.761084] _raw_spin_lock+0x2c/0x40 [ 105.765099] ? est_fetch_counters+0x3c/0xa0 [ 105.769633] est_fetch_counters+0x3c/0xa0 [ 105.773995] est_timer+0x87/0x390 [ 105.777670] ? est_fetch_counters+0xa0/0xa0 [ 105.782210] ? lock_acquire+0x12e/0x290 [ 105.786410] call_timer_fn+0x161/0x550 [ 105.790512] ? est_fetch_counters+0xa0/0xa0 [ 105.795055] ? del_timer_sync+0xd0/0xd0 [ 105.799249] ? __lock_is_held+0x93/0x110 [ 105.803531] ? mark_held_locks+0x20/0xe0 [ 105.807813] ? _raw_spin_unlock_irq+0x29/0x40 [ 105.812525] ? est_fetch_counters+0xa0/0xa0 [ 105.817069] ? est_fetch_counters+0xa0/0xa0 [ 105.821610] run_timer_softirq+0x3c4/0x9f0 [ 105.826064] ? lock_acquire+0x12e/0x290 [ 105.830257] ? __bpf_trace_timer_class+0x10/0x10 [ 105.835237] ? __lock_is_held+0x25/0x110 [ 105.839517] __do_softirq+0x11d/0x7bf [ 105.843542] irq_exit+0x140/0x190 [ 105.847208] smp_apic_timer_interrupt+0xac/0x3b0 [ 105.852182] apic_timer_interrupt+0xf/0x20 [ 105.856628] </IRQ> [ 105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0 [ 105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53 [ 105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1 [ 105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac [ 105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000 [ 105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004 [ 105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b [ 105.929988] ? trace_hardirqs_on_caller+0x141/0x2d0 [ 105.935232] do_idle+0x28e/0x320 [ 105.938817] ? arch_cpu_idle_exit+0x40/0x40 [ 105.943361] ? mark_lock+0x8c1/0x980 [ 105.947295] ? _raw_spin_unlock_irqrestore+0x32/0x60 [ 105.952619] cpu_startup_entry+0xc2/0xd0 [ 105.956900] ? cpu_in_idle+0x20/0x20 [ 105.960830] ? _raw_spin_unlock_irqrestore+0x32/0x60 [ 105.966146] ? trace_hardirqs_on_caller+0x141/0x2d0 [ 105.971391] start_secondary+0x2b5/0x360 [ 105.975669] ? set_cpu_sibling_map+0x1330/0x1330 [ 105.980654] secondary_startup_64+0xa5/0xb0 Taking tcf_lock in sample action with bh disabled causes lockdep to issue a warning regarding possible irq lock inversion dependency between tcf_lock, and psample_groups_lock that is taken when holding tcf_lock in sample init: [ 162.108959] Possible interrupt unsafe locking scenario: [ 162.116386] CPU0 CPU1 [ 162.121277] ---- ---- [ 162.126162] lock(psample_groups_lock); [ 162.130447] local_irq_disable(); [ 162.136772] lock(&(&p->tcfa_lock)->rlock); [ 162.143957] lock(psample_groups_lock); [ 162.150813] <Interrupt> [ 162.153808] lock(&(&p->tcfa_lock)->rlock); [ 162.158608] *** DEADLOCK *** In order to prevent potential lock inversion dependency between tcf_lock and psample_groups_lock, extract call to psample_group_get() from tcf_lock protected section in sample action init function. Fixes: 4e232818 ("net: sched: act_mirred: remove dependency on rtnl lock") Fixes: 764e9a24 ("net: sched: act_vlan: remove dependency on rtnl lock") Fixes: 729e0126 ("net: sched: act_tunnel_key: remove dependency on rtnl lock") Fixes: d7728495 ("net: sched: act_sample: remove dependency on rtnl lock") Fixes: e8917f43 ("net: sched: act_gact: remove dependency on rtnl lock") Fixes: b6a2b971 ("net: sched: act_csum: remove dependency on rtnl lock") Fixes: 2142236b ("net: sched: act_bpf: remove dependency on rtnl lock") Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2018 3 次提交
-
-
由 Haishuang Yan 提交于
Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit code path. Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-18 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit restrictions, from Yonghong. 2) Fix a suspicious RCU rcu_dereference_check() warning triggered from removing a device's XDP memory allocator by using the correct rhashtable lookup function, from Tariq. 3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races as well as enforcing module aliases for ULPs. Another fix for BPF map redirect to make them work again with tail calls, from Daniel. 4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) Infinite loop in IPVS when net namespace is released, from Tan Hu. 2) Do not show negative timeouts in ip_vs_conn by using the new jiffies_delta_to_msecs(), patches from Matteo Croce. 3) Set F_IFACE flag for linklocal addresses in ip6t_rpfilter, from Florian Westphal. 4) Fix overflow in set size allocation, from Taehee Yoo. 5) Use netlink_dump_start() from ctnetlink to fix memleak from the error path, again from Florian. 6) Register nfnetlink_subsys in last place, otherwise netns init path may lose race and see net->nft uninitialized data. This also reverts previous attempt to fix this by increase netns refcount, patches from Florian. 7) Remove conntrack entries on layer 4 protocol tracker module removal, from Florian. 8) Use GFP_KERNEL_ACCOUNT for xtables blob allocation, from Michal Hocko. 9) Get tproxy documentation in sync with existing codebase, from Mate Eckl. 10) Honor preset layer 3 protocol via ctx->family in the new nft_ct timeout infrastructure, from Harsha Sharma. 11) Let uapi nfnetlink_osf.h compile standalone with no errors, from Dmitry V. Levin. 12) Missing braces compilation warning in nft_tproxy, patch from Mate Eclk. 13) Disregard bogus check to bail out on non-anonymous sets from the dynamic set update extension. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2018 3 次提交
-
-
由 Daniel Borkmann 提交于
Commits 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") and 7c300131 ("bpf: fix ri->map_owner pointer on bpf_prog_realloc") tried to mitigate that buggy programs using bpf_redirect_map() helper call do not leave stale maps behind. Idea was to add a map_owner cookie into the per CPU struct redirect_info which was set to prog->aux by the prog making the helper call as a proof that the map is not stale since the prog is implicitly holding a reference to it. This owner cookie could later on get compared with the program calling into BPF whether they match and therefore the redirect could proceed with processing the map safely. In (obvious) hindsight, this approach breaks down when tail calls are involved since the original caller's prog->aux pointer does not have to match the one from one of the progs out of the tail call chain, and therefore the xdp buffer will be dropped instead of redirected. A way around that would be to fix the issue differently (which also allows to remove related work in fast path at the same time): once the life-time of a redirect map has come to its end we use it's map free callback where we need to wait on synchronize_rcu() for current outstanding xdp buffers and remove such a map pointer from the redirect info if found to be present. At that time no program is using this map anymore so we simply invalidate the map pointers to NULL iff they previously pointed to that instance while making sure that the redirect path only reads out the map once. Fixes: 97f91a7c ("bpf: add bpf_redirect_map helper routine") Fixes: 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Reported-by: NSebastiano Miano <sebastiano.miano@polito.it> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Heiner Kallweit 提交于
Now that we switched the r8169 driver to use phylib, there's a dependency on the Realtek PHY drivers. This dependency was missing in Kconfig. Reported-by: NJouni Mettälä <jtmettala@gmail.com> Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonghong Song 提交于
The bpf selftest test_cgroup_storage failed in one of our production test servers. # sudo ./test_cgroup_storage Failed to create map: Operation not permitted It turns out this is due to insufficient locked memory with system default 16KB. Similar to other self tests, let us arm the process with unlimited locked memory. With this change, the test passed. # sudo ./test_cgroup_storage test_cgroup_storage:PASS Fixes: 68cfa3ac ("selftests/bpf: add a cgroup storage test") Cc: Roman Gushchin <guro@fb.com> Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NRoman Gushchin <guro@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 17 8月, 2018 32 次提交
-
-
由 Alexei Starovoitov 提交于
Daniel Borkmann says: ==================== Batch of various fixes related to BPF sockmap and ULP, including adding module alias to restrict module requests, races and memory leaks in sockmap code. For details please refer to the individual patches. Thanks! ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
The current code in sock_map_ctx_update_elem() allows for BPF_EXIST and BPF_NOEXIST map update flags. While on array-like maps this approach is rather uncommon, e.g. bpf_fd_array_map_update_elem() and others enforce map update flags to be BPF_ANY such that xchg() can be used directly, the current implementation in sock map does not guarantee that such operation with BPF_EXIST / BPF_NOEXIST is atomic. The initial test does a READ_ONCE(stab->sock_map[i]) to fetch the socket from the slot which is then tested for NULL / non-NULL. However later after __sock_map_ctx_update_elem(), the actual update is done through osock = xchg(&stab->sock_map[i], sock). Problem is that in the meantime a different CPU could have updated / deleted a socket on that specific slot and thus flag contraints won't hold anymore. I've been thinking whether best would be to just break UAPI and do an enforcement of BPF_ANY to check if someone actually complains, however trouble is that already in BPF kselftest we use BPF_NOEXIST for the map update, and therefore it might have been copied into applications already. The fix to keep the current behavior intact would be to add a map lock similar to the sock hash bucket lock only for covering the whole map. Fixes: 174a79ff ("bpf: sockmap with sk redirect support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
The smap_start_sock() and smap_stop_sock() are each protected under the sock->sk_callback_lock from their call-sites except in the case of sock_map_delete_elem() where we drop the old socket from the map slot. This is racy because the same sock could be part of multiple sock maps, so we run smap_stop_sock() in parallel, and given at that point psock->strp_enabled might be true on both CPUs, we might for example wrongly restore the sk->sk_data_ready / sk->sk_write_space. Therefore, hold the sock->sk_callback_lock as well on delete. Looks like 2f857d04 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") had this right, but later on e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close") removed it again from delete leaving this smap_stop_sock() instance unprotected. Fixes: e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
While working on sockmap I noticed that we do not always kfree the struct smap_psock_map_entry list elements which track psocks attached to maps. In the case of sock_hash_ctx_update_elem(), these map entries are allocated outside of __sock_map_ctx_update_elem() with their linkage to the socket hash table filled. In the case of sock array, the map entries are allocated inside of __sock_map_ctx_update_elem() and added with their linkage to the psock->maps. Both additions are under psock->maps_lock each. Now, we drop these elements from their psock->maps list in a few occasions: i) in sock array via smap_list_map_remove() when an entry is either deleted from the map from user space, or updated via user space or BPF program where we drop the old socket at that map slot, or the sock array is freed via sock_map_free() and drops all its elements; ii) for sock hash via smap_list_hash_remove() in exactly the same occasions as just described for sock array; iii) in the bpf_tcp_close() where we remove the elements from the list via psock_map_pop() and iterate over them dropping themselves from either sock array or sock hash; and last but not least iv) once again in smap_gc_work() which is a callback for deferring the work once the psock refcount hit zero and thus the socket is being destroyed. Problem is that the only case where we kfree() the list entry is in case iv), which at that point should have an empty list in normal cases. So in cases from i) to iii) we unlink the elements without freeing where they go out of reach from us. Hence fix is to properly kfree() them as well to stop the leakage. Given these are all handled under psock->maps_lock there is no need for deferred RCU freeing. I later also ran with kmemleak detector and it confirmed the finding as well where in the state before the fix the object goes unreferenced while after the patch no kmemleak report related to BPF showed up. [...] unreferenced object 0xffff880378eadae0 (size 64): comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 50 4d 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 PMu]............ backtrace: [<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210 [<0000000045dd6d3c>] bpf_sock_map_update+0x29/0x60 [<00000000877723aa>] ___bpf_prog_run+0x1e1f/0x4960 [<000000002ef89e83>] 0xffffffffffffffff unreferenced object 0xffff880378ead240 (size 64): comm "test_sockmap", pid 2225, jiffies 4294720701 (age 43.504s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 00 44 75 5d 03 88 ff ff 00 00 00 00 00 00 00 00 .Du]............ backtrace: [<000000005225ac3c>] sock_map_ctx_update_elem.isra.21+0xd8/0x210 [<0000000030e37a3a>] sock_map_update_elem+0x125/0x240 [<000000002e5ce36e>] map_update_elem+0x4eb/0x7b0 [<00000000db453cc9>] __x64_sys_bpf+0x1f9/0x360 [<0000000000763660>] do_syscall_64+0x9a/0x300 [<00000000422a2bb2>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000002ef89e83>] 0xffffffffffffffff [...] Fixes: e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close") Fixes: 54fedb42 ("bpf: sockmap, fix smap_list_map_remove when psock is in many maps") Fixes: 2f857d04 ("bpf: sockmap, remove STRPARSER map_flags and add multi-map support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
I found that in BPF sockmap programs once we either delete a socket from the map or we updated a map slot and the old socket was purged from the map that these socket can never get reattached into a map even though their related psock has been dropped entirely at that point. Reason is that tcp_cleanup_ulp() leaves the old icsk->icsk_ulp_ops intact, so that on the next tcp_set_ulp_id() the kernel returns an -EEXIST thinking there is still some active ULP attached. BPF sockmap is the only one that has this issue as the other user, kTLS, only calls tcp_cleanup_ulp() from tcp_v4_destroy_sock() whereas sockmap semantics allow dropping the socket from the map with all related psock state being cleaned up. Fixes: 1aa12bdf ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Lets not turn the TCP ULP lookup into an arbitrary module loader as we only intend to load ULP modules through this mechanism, not other unrelated kernel modules: [root@bar]# cat foo.c #include <sys/types.h> #include <sys/socket.h> #include <linux/tcp.h> #include <linux/in.h> int main(void) { int sock = socket(PF_INET, SOCK_STREAM, 0); setsockopt(sock, IPPROTO_TCP, TCP_ULP, "sctp", sizeof("sctp")); return 0; } [root@bar]# gcc foo.c -O2 -Wall [root@bar]# lsmod | grep sctp [root@bar]# ./a.out [root@bar]# lsmod | grep sctp sctp 1077248 4 libcrc32c 16384 3 nf_conntrack,nf_nat,sctp [root@bar]# Fix it by adding module alias to TCP ULP modules, so probing module via request_module() will be limited to tcp-ulp-[name]. The existing modules like kTLS will load fine given tcp-ulp-tls alias, but others will fail to load: [root@bar]# lsmod | grep sctp [root@bar]# ./a.out [root@bar]# lsmod | grep sctp [root@bar]# Sockmap is not affected from this since it's either built-in or not. Fixes: 734942cc ("tcp: ULP infrastructure") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Yonghong Song 提交于
Commit 394e40a2 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") refactored the bpf_prog_array_copy_core() to accommodate new structure bpf_prog_array_item which contains bpf_prog array itself. In the old code, we had perf_event_query_prog_array(): mutex_lock(...) bpf_prog_array_copy_call(): prog = rcu_dereference_check(array, 1)->progs bpf_prog_array_copy_core(prog, ...) mutex_unlock(...) With the above commit, we had perf_event_query_prog_array(): mutex_lock(...) bpf_prog_array_copy_call(): bpf_prog_array_copy_core(array, ...): item = rcu_dereference(array)->items; ... mutex_unlock(...) The new code will trigger a lockdep rcu checking warning. The fix is to change rcu_dereference() to rcu_dereference_check() to prevent such a warning. Reported-by: syzbot+6e72317008eef84a216b@syzkaller.appspotmail.com Fixes: 394e40a2 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage") Cc: Roman Gushchin <guro@fb.com> Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NRoman Gushchin <guro@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jesper Dangaard Brouer 提交于
It is common XDP practice to unload/deattach the XDP bpf program, when the XDP sample program is Ctrl-C interrupted (SIGINT) or killed (SIGTERM). The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info, forgot to trap signal SIGTERM (which is the default signal used by the kill command). This was discovered by Red Hat QA, which automated scripts depend on killing the XDP sample program after a timeout period. Fixes: fad3917e ("samples/bpf: add cpumap sample program xdp_redirect_cpu") Fixes: 0fca931a ("samples/bpf: program demonstrating access to xdp_rxq_info") Reported-by: NJean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Tariq Toukan 提交于
Fix the warning below by calling rhashtable_lookup_fast. Also, make some code movements for better quality and human readability. [ 342.450870] WARNING: suspicious RCU usage [ 342.455856] 4.18.0-rc2+ #17 Tainted: G O [ 342.462210] ----------------------------- [ 342.467202] ./include/linux/rhashtable.h:481 suspicious rcu_dereference_check() usage! [ 342.476568] [ 342.476568] other info that might help us debug this: [ 342.476568] [ 342.486978] [ 342.486978] rcu_scheduler_active = 2, debug_locks = 1 [ 342.495211] 4 locks held by modprobe/3934: [ 342.500265] #0: 00000000e23116b2 (mlx5_intf_mutex){+.+.}, at: mlx5_unregister_interface+0x18/0x90 [mlx5_core] [ 342.511953] #1: 00000000ca16db96 (rtnl_mutex){+.+.}, at: unregister_netdev+0xe/0x20 [ 342.521109] #2: 00000000a46e2c4b (&priv->state_lock){+.+.}, at: mlx5e_close+0x29/0x60 [mlx5_core] [ 342.531642] #3: 0000000060c5bde3 (mem_id_lock){+.+.}, at: xdp_rxq_info_unreg+0x93/0x6b0 [ 342.541206] [ 342.541206] stack backtrace: [ 342.547075] CPU: 12 PID: 3934 Comm: modprobe Tainted: G O 4.18.0-rc2+ #17 [ 342.556621] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [ 342.565606] Call Trace: [ 342.568861] dump_stack+0x78/0xb3 [ 342.573086] xdp_rxq_info_unreg+0x3f5/0x6b0 [ 342.578285] ? __call_rcu+0x220/0x300 [ 342.582911] mlx5e_free_rq+0x38/0xc0 [mlx5_core] [ 342.588602] mlx5e_close_channel+0x20/0x120 [mlx5_core] [ 342.594976] mlx5e_close_channels+0x26/0x40 [mlx5_core] [ 342.601345] mlx5e_close_locked+0x44/0x50 [mlx5_core] [ 342.607519] mlx5e_close+0x42/0x60 [mlx5_core] [ 342.613005] __dev_close_many+0xb1/0x120 [ 342.617911] dev_close_many+0xa2/0x170 [ 342.622622] rollback_registered_many+0x148/0x460 [ 342.628401] ? __lock_acquire+0x48d/0x11b0 [ 342.633498] ? unregister_netdev+0xe/0x20 [ 342.638495] rollback_registered+0x56/0x90 [ 342.643588] unregister_netdevice_queue+0x7e/0x100 [ 342.649461] unregister_netdev+0x18/0x20 [ 342.654362] mlx5e_remove+0x2a/0x50 [mlx5_core] [ 342.659944] mlx5_remove_device+0xe5/0x110 [mlx5_core] [ 342.666208] mlx5_unregister_interface+0x39/0x90 [mlx5_core] [ 342.673038] cleanup+0x5/0xbfc [mlx5_core] [ 342.678094] __x64_sys_delete_module+0x16b/0x240 [ 342.683725] ? do_syscall_64+0x1c/0x210 [ 342.688476] do_syscall_64+0x5a/0x210 [ 342.693025] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 8d5d8852 ("xdp: rhashtable with allocator ID to pointer mapping") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Suggested-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Yuval Shaia 提交于
priv argument is not used by the function, delete it. Fixes: a8984281 ("net/mlx5e: Merge per priority stats groups") Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
If set cbs parameters calculated for 1000Mb, but use on 100Mb port w/o h/w offload (for cpsw offload it doesn't matter), it works incorrectly. According to the example and testing board, second port is 100Mb interface. Correct them on recalculated for 100Mb interface. It allows to use the same command for CBS software implementation for board in example. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kees Cook 提交于
It was possible to directly leak the kernel address where the isdn_dev structure pointer was stored. This is a kernel ASLR bypass for anyone with access to the ioctl. The code had been present since the beginning of git history, though this shouldn't ever be needed for normal operation, therefore remove it. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lad, Prabhakar 提交于
ksz9477 is superset of ksz9xx series, driver just works out of the box for ksz9897 chip with this patch. Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
David Ahern reported memory leak in veth. ======================================================================= $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800354d5c00 (size 1024): comm "ip", pid 836, jiffies 4294722952 (age 25.904s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] kmemleak_alloc+0x70/0x94 [<(____ptrval____)>] slab_post_alloc_hook+0x42/0x52 [<(____ptrval____)>] __kmalloc+0x101/0x142 [<(____ptrval____)>] kmalloc_array.constprop.20+0x1e/0x26 [veth] [<(____ptrval____)>] veth_newlink+0x147/0x3ac [veth] ... unreferenced object 0xffff88002e009c00 (size 1024): comm "ip", pid 836, jiffies 4294722958 (age 25.898s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<(____ptrval____)>] kmemleak_alloc+0x70/0x94 [<(____ptrval____)>] slab_post_alloc_hook+0x42/0x52 [<(____ptrval____)>] __kmalloc+0x101/0x142 [<(____ptrval____)>] kmalloc_array.constprop.20+0x1e/0x26 [veth] [<(____ptrval____)>] veth_newlink+0x219/0x3ac [veth] ======================================================================= veth_rq allocated in veth_newlink() was not freed on dellink. We need to free up them after veth_close() so that any packets will not reference the queues afterwards. Thus free them in veth_dev_free() in the same way as freeing stats structure (vstats). Also move queues allocation to veth_dev_init() to be in line with stats allocation. Fixes: 638264dc ("veth: Support per queue XDP ring") Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Tested-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
Previously, alloc_ila_locks() and bucket_table_alloc() call spin_lock_init() separately, therefore they have two different lock names and lock class keys. However, after commit b8932817 ("ila: Call library function alloc_bucket_locks") they both call helper alloc_bucket_spinlocks() which now only has one lock name and lock class key. This causes a few bogus lockdep warnings as reported by syzbot. Fix this by making alloc_bucket_locks() a macro and pass declaration name as lock name and a static lock class key inside the macro. Fixes: b8932817 ("ila: Call library function alloc_bucket_locks") Reported-by: <syzbot+b66a5a554991a8ed027c@syzkaller.appspotmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Action init API was changed to always take reference to action, even when overwriting existing action. Substitute conditional action release, which was executed only if action is newly created, with unconditional release in tcf_ife_init() error handling code to prevent double free or memory leak in case of overwrite. Fixes: 4e8ddd7f ("net: sched: don't release reference on action overwrite") Reported-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabrizio Castro 提交于
Document RZ/G2M (R8A774A1) SoC bindings. Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: NBiju Das <biju.das@bp.renesas.com> Reviewed-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
Fix tcf_unbind_filter missing in cls_matchall as this will trigger WARN_ON() in cbq_destroy_class(). Fixes: fd62d9f5 ("net/sched: matchall: Fix configuration race") Reported-by: NLi Shuang <shuali@redhat.com> Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
This check is superfluous since it breaks valid configurations, remove it. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Máté Eckl 提交于
This patch fixes a warning reported by the kbuild test robot (from linux-next tree): net/netfilter/nft_tproxy.c: In function 'nft_tproxy_eval_v6': >> net/netfilter/nft_tproxy.c:85:9: warning: missing braces around initializer [-Wmissing-braces] struct in6_addr taddr = {0}; ^ net/netfilter/nft_tproxy.c:85:9: warning: (near initialization for 'taddr.in6_u') [-Wmissing-braces] This warning is actually caused by a gcc bug already resolved in newer versions (kbuild used 4.9) so this kind of initialization is omitted and memset is used instead. Fixes: 4ed8eb65 ("netfilter: nf_tables: Add native tproxy support") Signed-off-by: NMáté Eckl <ecklm94@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Dmitry V. Levin 提交于
Move inclusion of <linux/ip.h> and <linux/tcp.h> from linux/netfilter/xt_osf.h to linux/netfilter/nf_osf.h to fix the following linux/netfilter/nf_osf.h userspace compilation errors: /usr/include/linux/netfilter/nf_osf.h:59:24: error: 'MAX_IPOPTLEN' undeclared here (not in a function) struct nf_osf_opt opt[MAX_IPOPTLEN]; /usr/include/linux/netfilter/nf_osf.h:64:17: error: field 'ip' has incomplete type struct iphdr ip; /usr/include/linux/netfilter/nf_osf.h:65:18: error: field 'tcp' has incomplete type struct tcphdr tcp; Fixes: bfb15f2a ("netfilter: extract Passive OS fingerprint infrastructure from xt_osf") Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Harsha Sharma 提交于
If l3 protocol value is not specified for ct timeout object then use the value from nft_ctx protocol family. Signed-off-by: NHarsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Máté Eckl 提交于
Recently, transparent proxy support has been added to nf_tables so that this document should be updated with the new information. - Nft commands are added as alternatives to iptables ones. - The link for a patched iptables is removed as it is already part of the mainline iptables implementation (and the link is dead). - tcprdr is added as an example implementation of a transparent proxy Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Florian Westphal <fw@strlen.de> Cc: KOVACS Krisztian <hidden@sch.bme.hu> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: linux-doc@vger.kernel.org Signed-off-by: NMáté Eckl <ecklm94@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Michal Hocko 提交于
eacd86ca ("net/netfilter/x_tables.c: use kvmalloc() in xt_alloc_table_info()") has unintentionally fortified xt_alloc_table_info allocation when __GFP_RETRY has been dropped from the vmalloc fallback. Later on there was a syzbot report that this can lead to OOM killer invocations when tables are too large and 0537250f ("netfilter: x_tables: make allocation less aggressive") has been merged to restore the original behavior. Georgi Nikolov however noticed that he is not able to install his iptables anymore so this can be seen as a regression. The primary argument for 0537250f was that this allocation path shouldn't really trigger the OOM killer and kill innocent tasks. On the other hand the interface requires root and as such should allow what the admin asks for. Root inside a namespaces makes this more complicated because those might be not trusted in general. If they are not then such namespaces should be restricted anyway. Therefore drop the __GFP_NORETRY and replace it by __GFP_ACCOUNT to enfore memcg constrains on it. Fixes: 0537250f ("netfilter: x_tables: make allocation less aggressive") Reported-by: NGeorgi Nikolov <gnikolov@icdsoft.com> Suggested-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
nf_ct_l4proto_unregister_one() leaves conntracks added by to-be-removed tracker behind, nf_ct_l4proto_unregister has to iterate for each protocol to be removed. v2: call nf_ct_iterate_destroy without holding nf_ct_proto_mutex. Fixes: 2c41f33c ("netfilter: move table iteration out of netns exit paths") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
When a netnsamespace exits, the nf_tables pernet_ops will remove all rules. However, there is one caveat: Base chains that register ingress hooks will cause use-after-free: device is already gone at that point. The device event handlers prevent this from happening: netns exit synthesizes unregister events for all devices. However, an improper fix for a race condition made the notifiers a no-op in case they get called from netns exit path, so revert that part. This is safe now as the previous patch fixed nf_tables pernet ops and device notifier initialisation ordering. Fixes: 0a2cf5ee ("netfilter: nf_tables: close race between netns exit and rmmod") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
We must register nfnetlink ops last, as that exposes nf_tables to userspace. Without this, we could theoretically get nfnetlink request before net->nft state has been initialized. Fixes: 99633ab2 ("netfilter: nf_tables: complete net namespace support") Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
Shaochun Chen points out we leak dumper filter state allocations stored in dump_control->data in case there is an error before netlink sets cb_running (after which ->done will be called at some point). In order to fix this, add .start functions and move allocations there. Same pattern as used in commit 90fd131a ("netfilter: nf_tables: move dumper state allocation into ->start"). Reported-by: Nshaochun chen <cscnull@gmail.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Taehee Yoo 提交于
In order to determine allocation size of set, ->privsize is invoked. At this point, both desc->size and size of each data structure of set are used. desc->size means number of element that is given by user. desc->size is u32 type. so that upperlimit of set element is 4294967295. but return type of ->privsize is also u32. hence overflow can occurred. test commands: %nft add table ip filter %nft add set ip filter hash1 { type ipv4_addr \; size 4294967295 \; } %nft list ruleset splat looks like: [ 1239.202910] kasan: CONFIG_KASAN_INLINE enabled [ 1239.208788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1239.217625] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1239.219329] CPU: 0 PID: 1603 Comm: nft Not tainted 4.18.0-rc5+ #7 [ 1239.229091] RIP: 0010:nft_hash_walk+0x1d2/0x310 [nf_tables_set] [ 1239.229091] Code: 84 d2 7f 10 4c 89 e7 89 44 24 38 e8 d8 5a 17 e0 8b 44 24 38 48 8d 7b 10 41 0f b6 0c 24 48 89 fa 48 89 fe 48 c1 ea 03 83 e6 07 <42> 0f b6 14 3a 40 38 f2 7f 1a 84 d2 74 16 [ 1239.229091] RSP: 0018:ffff8801118cf358 EFLAGS: 00010246 [ 1239.229091] RAX: 0000000000000000 RBX: 0000000000020400 RCX: 0000000000000001 [ 1239.229091] RDX: 0000000000004082 RSI: 0000000000000000 RDI: 0000000000020410 [ 1239.229091] RBP: ffff880114d5a988 R08: 0000000000007e94 R09: ffff880114dd8030 [ 1239.229091] R10: ffff880114d5a988 R11: ffffed00229bb006 R12: ffff8801118cf4d0 [ 1239.229091] R13: ffff8801118cf4d8 R14: 0000000000000000 R15: dffffc0000000000 [ 1239.229091] FS: 00007f5a8fe0b700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 1239.229091] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1239.229091] CR2: 00007f5a8ecc27b0 CR3: 000000010608e000 CR4: 00000000001006f0 [ 1239.229091] Call Trace: [ 1239.229091] ? nft_hash_remove+0xf0/0xf0 [nf_tables_set] [ 1239.229091] ? memset+0x1f/0x40 [ 1239.229091] ? __nla_reserve+0x9f/0xb0 [ 1239.229091] ? memcpy+0x34/0x50 [ 1239.229091] nf_tables_dump_set+0x9a1/0xda0 [nf_tables] [ 1239.229091] ? __kmalloc_reserve.isra.29+0x2e/0xa0 [ 1239.229091] ? nft_chain_hash_obj+0x630/0x630 [nf_tables] [ 1239.229091] ? nf_tables_commit+0x2c60/0x2c60 [nf_tables] [ 1239.229091] netlink_dump+0x470/0xa20 [ 1239.229091] __netlink_dump_start+0x5ae/0x690 [ 1239.229091] nft_netlink_dump_start_rcu+0xd1/0x160 [nf_tables] [ 1239.229091] nf_tables_getsetelem+0x2e5/0x4b0 [nf_tables] [ 1239.229091] ? nft_get_set_elem+0x440/0x440 [nf_tables] [ 1239.229091] ? nft_chain_hash_obj+0x630/0x630 [nf_tables] [ 1239.229091] ? nf_tables_dump_obj_done+0x70/0x70 [nf_tables] [ 1239.229091] ? nla_parse+0xab/0x230 [ 1239.229091] ? nft_get_set_elem+0x440/0x440 [nf_tables] [ 1239.229091] nfnetlink_rcv_msg+0x7f0/0xab0 [nfnetlink] [ 1239.229091] ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink] [ 1239.229091] ? debug_show_all_locks+0x290/0x290 [ 1239.229091] ? sched_clock_cpu+0x132/0x170 [ 1239.229091] ? find_held_lock+0x39/0x1b0 [ 1239.229091] ? sched_clock_local+0x10d/0x130 [ 1239.229091] netlink_rcv_skb+0x211/0x320 [ 1239.229091] ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink] [ 1239.229091] ? netlink_ack+0x7b0/0x7b0 [ 1239.229091] ? ns_capable_common+0x6e/0x110 [ 1239.229091] nfnetlink_rcv+0x2d1/0x310 [nfnetlink] [ 1239.229091] ? nfnetlink_rcv_batch+0x10f0/0x10f0 [nfnetlink] [ 1239.229091] ? netlink_deliver_tap+0x829/0x930 [ 1239.229091] ? lock_acquire+0x265/0x2e0 [ 1239.229091] netlink_unicast+0x406/0x520 [ 1239.509725] ? netlink_attachskb+0x5b0/0x5b0 [ 1239.509725] ? find_held_lock+0x39/0x1b0 [ 1239.509725] netlink_sendmsg+0x987/0xa20 [ 1239.509725] ? netlink_unicast+0x520/0x520 [ 1239.509725] ? _copy_from_user+0xa9/0xc0 [ 1239.509725] __sys_sendto+0x21a/0x2c0 [ 1239.509725] ? __ia32_sys_getpeername+0xa0/0xa0 [ 1239.509725] ? retint_kernel+0x10/0x10 [ 1239.509725] ? sched_clock_cpu+0x132/0x170 [ 1239.509725] ? find_held_lock+0x39/0x1b0 [ 1239.509725] ? lock_downgrade+0x540/0x540 [ 1239.509725] ? up_read+0x1c/0x100 [ 1239.509725] ? __do_page_fault+0x763/0x970 [ 1239.509725] ? retint_user+0x18/0x18 [ 1239.509725] __x64_sys_sendto+0x177/0x180 [ 1239.509725] do_syscall_64+0xaa/0x360 [ 1239.509725] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1239.509725] RIP: 0033:0x7f5a8f468e03 [ 1239.509725] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb d0 0f 1f 84 00 00 00 00 00 83 3d 49 c9 2b 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 [ 1239.509725] RSP: 002b:00007ffd78d0b778 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 1239.509725] RAX: ffffffffffffffda RBX: 00007ffd78d0c890 RCX: 00007f5a8f468e03 [ 1239.509725] RDX: 0000000000000034 RSI: 00007ffd78d0b7e0 RDI: 0000000000000003 [ 1239.509725] RBP: 00007ffd78d0b7d0 R08: 00007f5a8f15c160 R09: 000000000000000c [ 1239.509725] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd78d0b7e0 [ 1239.509725] R13: 0000000000000034 R14: 00007f5a8f9aff60 R15: 00005648040094b0 [ 1239.509725] Modules linked in: nf_tables_set nf_tables nfnetlink ip_tables x_tables [ 1239.670713] ---[ end trace 39375adcda140f11 ]--- [ 1239.676016] RIP: 0010:nft_hash_walk+0x1d2/0x310 [nf_tables_set] [ 1239.682834] Code: 84 d2 7f 10 4c 89 e7 89 44 24 38 e8 d8 5a 17 e0 8b 44 24 38 48 8d 7b 10 41 0f b6 0c 24 48 89 fa 48 89 fe 48 c1 ea 03 83 e6 07 <42> 0f b6 14 3a 40 38 f2 7f 1a 84 d2 74 16 [ 1239.705108] RSP: 0018:ffff8801118cf358 EFLAGS: 00010246 [ 1239.711115] RAX: 0000000000000000 RBX: 0000000000020400 RCX: 0000000000000001 [ 1239.719269] RDX: 0000000000004082 RSI: 0000000000000000 RDI: 0000000000020410 [ 1239.727401] RBP: ffff880114d5a988 R08: 0000000000007e94 R09: ffff880114dd8030 [ 1239.735530] R10: ffff880114d5a988 R11: ffffed00229bb006 R12: ffff8801118cf4d0 [ 1239.743658] R13: ffff8801118cf4d8 R14: 0000000000000000 R15: dffffc0000000000 [ 1239.751785] FS: 00007f5a8fe0b700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 1239.760993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1239.767560] CR2: 00007f5a8ecc27b0 CR3: 000000010608e000 CR4: 00000000001006f0 [ 1239.775679] Kernel panic - not syncing: Fatal exception [ 1239.776630] Kernel Offset: 0x1f000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 1239.776630] Rebooting in 5 seconds.. Fixes: 20a69341 ("netfilter: nf_tables: add netlink set API") Signed-off-by: NTaehee Yoo <ap420073@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Florian Westphal 提交于
Roman reports that DHCPv6 client no longer sees replies from server due to ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP rule. We need to set the F_IFACE flag for linklocal addresses, they are scoped per-device. Fixes: 47b7e7f8 ("netfilter: don't set F_IFACE on ipv6 fib lookups") Reported-by: NRoman Mamedov <rm@romanrm.net> Tested-by: NRoman Mamedov <rm@romanrm.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Matteo Croce 提交于
Since commit 500462a9 ("timers: Switch to a non-cascading wheel"), timers duration can last even 12.5% more than the scheduled interval. IPVS has two handlers, /proc/net/ip_vs_conn and /proc/net/ip_vs_conn_sync, which shows the remaining time before that a connection expires. The default expire time for a connection is 60 seconds, and the expiration timer can fire even 4 seconds later than the scheduled time. The expiration time is calculated subtracting jiffies to the scheduled expiration time, and it's shown as a huge number when the timer fires late, since both values are unsigned. This can confuse script and tools which relies on it, like ipvsadm: root@mcroce-redhat:~# while ipvsadm -lc |grep SYN_RECV; do sleep 1 ; done TCP 00:05 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 00:04 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 00:03 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 00:02 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 00:01 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 00:00 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:44 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:43 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:42 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:41 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:40 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 TCP 68719476:39 SYN_RECV [fc00:1::1]:55732 [fc00:1::2]:8000 [fc00:2000::1]:8000 Signed-off-by: NMatteo Croce <mcroce@redhat.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Matteo Croce 提交于
add jiffies_delta_to_msecs() helper func to calculate the delta between two times and eventually 0 if negative. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NMatteo Croce <mcroce@redhat.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-