Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicated code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the duplicate code and use the cpuidle common code for initialization.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The usual scheme to initialize a cpuidle driver on a SMP is:

	cpuidle_register_driver(drv);
	for_each_possible_cpu(cpu) {
		device = &per_cpu(cpuidle_dev, cpu);
		cpuidle_register_device(device);
	}

This code is duplicated in each cpuidle driver.

On UP systems, it is done this way:

	cpuidle_register_driver(drv);
	device = &per_cpu(cpuidle_dev, cpu);
	cpuidle_register_device(device);

On UP, the macro 'for_each_cpu' does one iteration:

#define for_each_cpu(cpu, mask)                 \
        for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)

Hence, the initialization loop is the same for UP than SMP.

Beside, we saw different bugs / mis-initialization / return code unchecked in
the different drivers, the code is duplicated including bugs. After fixing all
these ones, it appears the initialization pattern is the same for everyone.

Please note, some drivers are doing dev->state_count = drv->state_count. This is
not necessary because it is done by the cpuidle_enable_device function in the
cpuidle framework. This is true, until you have the same states for all your
devices. Otherwise, the 'low level' API should be used instead with the specific
initialization for the driver.

Let's add a wrapper function doing this initialization with a cpumask parameter
for the coupled idle states and use it for all the drivers.

That will save a lot of LOC, consolidate the code, and the modifications in the
future could be done in a single place. Another benefit is the consolidation of
the cpuidle_device variable which is now in the cpuidle framework and no longer
spread accross the different arch specific drivers.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

All the drivers are using, in their initialization function, the
for_each_possible_cpu macro.

Using for_each_online_cpu means the driver must handle the initialization
of the cpuidle device when a cpu is up which is not the case here.

Change the macro to for_each_possible_cpu as that fix the hotplug
initialization and make the initialization routine consistent with the
rest of the code in the different drivers.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The en_core_tk_irqen flag is set in all the cpuidle driver which
means it is not necessary to specify this flag.

Remove the flag and the code related to it.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>  # for mach-omap2/*
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

In a previous commit the en_core_tk_irqen flag has been added but we missed
the cpuidle_wrap_enter which was doing the job to measure the time for the
'omap3_enter_idle' function.

Actually, I don't see any reason to use this wrapper in the code. In the better
case, the time computation is not correctly done because of the different
operations done in omap3_enter_idle_bm which were not taken into account
before the en_core_tk_irqen flag was set.

As the time is reflected for the state overridden by the omap3_enter_idle_bm,
using the wrapper is pointless now, so removing it.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NKevin Hilman <khilman@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 688036b5 removed the function
'shmobile_enter_wfi' but we forgot to remove the definition in the header file.

Note this function is just an alias to 'cpu_do_idle()' wrapped into a cpuidle
function callback prototype which already exists with the default WFI state
and the arm_simple_enter function.

Remove the function prototype.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the shmobile_enter_wfi function which is the same as the
common WFI enter function from the arm cpuidle driver defined
with the ARM_CPUIDLE_WFI_STATE macro.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Registering the driver, or the device, can fail, let's check the return code
and return the error code to the PM layer.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Like all the other drivers, let's initialize the structure a compile time
instead of init time.

The states #1 and #2 are not enabled by default. The init function will
check the features of the board in order to enable the state.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The CPUIDLE_DRIVER_STATE_START constant is only set when the kernel compilation
option CONFIG_ARCH_HAS_CPU_RELAX is set, but this is only relatated to x86, so
it is always zero.

Remove the reference to this constant in the code.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The driver is a global static variable automatically initialized to zero.

Removing the useless initialization in the init function.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The start/stop_critical_timings are called from arch/x86/kernel/process.c
in the cpu_idle loop function.

Remove the ones in the cpuidle driver.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'omap-pm-v3.10/cleanup/cpuidle-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into pm-cpuidle

OMAP CPUidle cleanups for v3.10 from Kevin Hilman

The OMAP5 idle driver can re-use most of OMAP4 CPUidle driver
implementation. Also the next derivative SOCs are going to re-use
the MPUSS so, same driver with minor updates can be re-used.

Prepare the code so that its easier to add CPUidle support for
OMAP5 devices.
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Current OMAP4 CPUIdle driver is using omap4_mpuss_read_prev_context_state()
to check whether the MPU cluster lost context or not before calling
cpu_cluster_pm_exit().  This was initially done an optimization for
corner cases, where if the cluster low power entry fails for some
reason, the cluster context restore gets skipped.  However, since
reading the previous context is expensive (involving slow accesses to
the PRCM), it's better to avoid it and simply check the target cluster
state instead.

Moving forward, OMAP CPUidle drivers needs to be moved to drivers/idle/*
once the PRM/CM code gets moved to drivers. This patch also reduces one
dependency with platform code for idle driver movement.
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
[khilman@linaro.org: minor changelog edits]
Signed-off-by: NKevin Hilman <khilman@linaro.org>

It is useful to know the CPU power state along with MPUSS power state
in a supported C-state. Since the data is available via sysfs, one can
avoid scrolling the source code for precise construction of C-state.
Reported-by: NNishanth Menon <nm@ti.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

If the CPUidle device registration fails for some reason, we should
unregister the driver on error path.

Fix the code accordingly. Also when at it, check of the driver registration
failure too.
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

OMAP4 CPUidle driver registration call is under a loop which leads
to calling cpuidle_register_driver twice which is not intended.

Fix it by moving the driver registration outside the loop.
Reported-by: NNishanth Menon <nm@ti.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

The TIME_VALID flag is specified for the different states but
the time residency computation is not done, no tk flag, no time
computation in the idle function.

Set the en_core_tk_irqen flag to activate it.

Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

The current code computes the idle time but that can be handled
by the cpuidle framework if we enable the .en_core_tk_irqen flag.

Set the flag and remove the code related to the time computation.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The TIME_VALID flag is specified for the different states but
the time residency computation is not done, no tk flag, no time
computation in the idle function.

Set the en_core_tk_irqen flag to activate it.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The davinci_enter_idle is called from the cpuidle with the
cpuidle_wrap_enter function. This one does the time compution
for entering and exiting the idle function and then we call
again cpuidle_wrap_enter for cpu_do_idle. This is wrong, we
are calling recursively cpuidle_wrap_enter for nothing and
furthermore reenabling the local irq.

Remove this and replace it by the cpu_do_idle function.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

dev->state_count is initialized automatically by
cpuidle_register_device().

When drv->state_count is equal to dev->state_count, no need to init
this field, so removing it.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Initialize the idle states directly in the driver structure.

That prevents extra structure declaration and memcpy at init time.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NJoseph Lo <josephl@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the shmobile_enter_wfi function which is the same as the
common WFI enter function from the arm cpuidle driver defined
with the ARM_CPUIDLE_WFI_STATE macro.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Add the __init section for the functions which are called
at init time.

Signed-off-by: Daniel Lezcano <daniel.linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-cpuidle-next:
  cpuidle: imx6: remove timer broadcast initialization
  cpuidle: OMAP4: remove timer broadcast initialization
  cpuidle: ux500: remove timer broadcast initialization
  cpuidle: initialize the broadcast timer framework
  timer: move enum definition out of ifdef section
  cpuidle: kirkwood: fix coccicheck warnings
  cpuidle / kirkwood: remove redundant Kconfig option
  cpuidle / ux500 : use CPUIDLE_FLAG_TIMER_STOP flag
  cpuidle / imx6 : use CPUIDLE_FLAG_TIMER_STOP flag
  cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP flag
  cpuidle : handle clockevent notify from the cpuidle framework

* acpi-assorted:
  PCI / ACPI: Don't query OSC support with all possible controls
  ACPI / processor_thermal: avoid null pointer deference error
  ACPI / fan: avoid null pointer deference error
  ACPI / video: Fix applying indexed initial brightness value.
  ACPI / video: Make logic a little easier to understand.
  ACPI / video: Fix brightness control initialization for some laptops.
  ACPI: Use resource_size() in osl.c
  ACPI / acpi_pad: Used PTR_RET
  ACPI: suppress compiler warning in container.c
  ACPI: suppress compiler warning in battery.c
  ACPI: suppress compiler warnings in processor_throttling.c
  ACPI: suppress compiler warnings in button.c
  ACPI: replace kmalloc+memcpy with kmemdup
  ACPI: Remove acpi_pci_bind_root() definition
  ACPI video: ignore BIOS backlight value for HP dm4

* acpi-pm:
  ACPI / PM: Fix potential problem in acpi_device_get_power()

* acpica: (22 commits)
  ACPI: Set length even for TYPE_END_TAG acpi resource
  ACPICA: Update version to 20130214
  ACPICA: Object repair: Allow 0-length packages for variable-length packages
  ACPICA: Disassembler: Add warnings for unresolved control methods
  ACPICA: Return object repair: Add resource template repairs
  ACPICA: Return object repair: Add string-to-unicode conversion
  ACPICA: Split object conversion functions to a new file
  ACPICA: Add mechanism for early object repairs on a per-name basis
  ACPICA: Remove trailing comma in enum declarations
  ACPICA: Add exception descriptions to exception info table
  ACPICA: Add macros to exception code definitions
  ACPICA: Regression fix: reinstate safe exit macros
  ACPICA: Update for ACPI 5 hardware-reduced feature
  ACPICA: Add parens within macros around parameter names
  ACPICA: Add macros to access pointer to next object in the descriptor list
  ACPICA: Update error/debug messages for fixed events
  ACPICA: Fix a long-standing bug in local cache
  ACPICA: iASL/Disassembler: Add support for MTMR table
  ACPICA: iASL/Disassembler: Add support for VRTC table
  ACPICA: Update RASF table definition
  ...

* acpi-lpss:
  ACPI / LPSS: make code less confusing for reader
  ACPI / LPSS: Add support for exposing LTR registers to user space
  ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices

* acpi-hotplug:
  ACPI / memhotplug: Remove info->failed bit
  ACPI / memhotplug: set info->enabled for memory present at boot time
  ACPI: Verify device status after eject
  acpi: remove reference to ACPI_HOTPLUG_IO
  ACPI: Update _OST handling for notify
  ACPI: Update PNPID match handling for notify
  ACPI: Update PNPID set/free interfaces
  ACPI: Remove acpi_device dependency in acpi_device_set_id()
  ACPI / hotplug: Make acpi_hotplug_profile_ktype static
  ACPI / scan: Make memory hotplug driver use struct acpi_scan_handler
  ACPI / container: Use hotplug profile user space interface
  ACPI / hotplug: Introduce user space interface for hotplug profiles
  ACPI / scan: Introduce acpi_scan_handler_matching()
  ACPI / container: Use common hotplug code
  ACPI / scan: Introduce common code for ACPI-based device hotplug
  ACPI / scan: Introduce acpi_scan_match_handler()