The generic PM domains framework currently doesn't work with devices
whose power.irq_safe flag is set, because runtime PM callbacks for
such devices are run with interrupts disabled and the callbacks
provided by the generic PM domains framework use domain mutexes
and may sleep.  However, such devices very well may belong to
power domains on some systems, so the generic PM domains framework
should take them into account.

For this reason, modify the generic PM domains framework so that the
domain .power_off() and .power_on() callbacks are never executed for
a domain containing devices with power.irq_safe set, although the
.stop_device() and .start_device() callbacks are still run for them.

Additionally, introduce a flag allowing the creator of a
struct generic_pm_domain object to indicate that its .stop_device()
and .start_device() callbacks may be run in interrupt context
(might_sleep_if() triggers if that flag is not set and one of those
callbacks is run in interrupt context).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since the PM clock management code in drivers/base/power/clock_ops.c
is used for both runtime PM and system suspend/hibernation, the
definitions of data structures and headers related to it should not
be located in include/linux/pm_rumtime.h.  Move them to a separate
header file.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Currently pm_genpd_runtime_resume() has to walk the list of devices
from the device's PM domain to find the corresponding device list
object containing the need_restore field to check if the driver's
.runtime_resume() callback should be executed for the device.
This is suboptimal and can be simplified by using power.sybsys_data
to store device information used by the generic PM domains code.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since the power.subsys_data device field will be used by multiple
filesystems, introduce a reference counting mechanism for it to avoid
freeing it prematurely or changing its value at a wrong time.

Make the PM clocks management code that currently is the only user of
power.subsys_data use the new reference counting.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Introduce struct pm_subsys_data that may be subclassed by subsystems
to store subsystem-specific information related to the device.  Move
the clock management fields accessed through the power.subsys_data
pointer in struct device to the new strucutre.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Instead of coding the undocumented dependencies between power domains
A3RV and A4LC on SH7372 directly into the low-level power up/down
routines, make A3RV be a subdomain of A4LC, which will cause the
same dependecies to hold.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMagnus Damm <damm@opensource.se>

Change the name of the second argument of pm_genpd_add_subdomain()
so that it is (a) shorter and (b) in agreement with the name of
the second argument of pm_genpd_add_subdomain().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since it is now possible for a PM domain to have multiple masters
instead of one parent, rename the "wait for parent" status to reflect
the new situation.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Currently, for a given generic PM domain there may be only one parent
domain (i.e. a PM domain it depends on).  However, there is at least
one real-life case in which there should be two parents (masters) for
one PM domain (the A3RV domain on SH7372 turns out to depend on the
A4LC domain and it depends on the A4R domain and the same time). For
this reason, allow a PM domain to have multiple parents (masters) by
introducing objects representing links between PM domains.

The (logical) links between PM domains represent relationships in
which one domain is a master (i.e. it is depended on) and another
domain is a slave (i.e. it depends on the master) with the rule that
the slave cannot be powered on if the master is not powered on and
the master cannot be powered off if the slave is not powered off.
Each struct generic_pm_domain object representing a PM domain has
two lists of links, a list of links in which it is a master and
a list of links in which it is a slave.  The first of these lists
replaces the list of subdomains and the second one is used in place
of the parent pointer.

Each link is represented by struct gpd_link object containing
pointers to the master and the slave and two struct list_head
members allowing it to hook into two lists (the master's list
of "master" links and the slave's list of "slave" links).  This
allows the code to get to the link from each side (either from
the master or from the slave) and follow it in each direction.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The next patch will make it possible for a generic PM domain to have
multiple parents (i.e. multiple PM domains it depends on).  To
prepare for that change it is necessary to change pm_genpd_poweron()
so that it doesn't jump to the start label after running itself
recursively for the parent domain.  For this purpose, introduce a new
PM domain status value GPD_STATE_WAIT_PARENT that will be set by
pm_genpd_poweron() before calling itself recursively for the parent
domain and modify the code in drivers/base/power/domain.c so that
the GPD_STATE_WAIT_PARENT status is guaranteed to be preserved during
the execution of pm_genpd_poweron() for the parent.

This change also causes pm_genpd_add_subdomain() and
pm_genpd_remove_subdomain() to wait for started pm_genpd_poweron() to
complete and allows pm_genpd_runtime_resume() to avoid dropping the
lock after powering on the PM domain.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

If pm_genpd_remove_subdomain() is called to remove a PM domain's
subdomain and pm_genpd_poweron() is called for that subdomain at
the same time, and the pm_genpd_poweron() called by it recursively
for the parent returns an error, the first pm_genpd_poweron()'s
error code path will attempt to decrement the subdomain counter of
a PM domain that it's not a subdomain of any more.

Rearrange the code in pm_genpd_poweron() to prevent this from
happening.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

After the subdomain counter in struct generic_pm_domain has been
changed into an atomic_t field, it is possible to modify
pm_genpd_poweron() and pm_genpd_poweroff() so that they don't take
the parents locks.  This requires pm_genpd_poweron() to increment
the parent's subdomain counter before calling itself recursively
for the parent and to decrement it if an error is to be returned.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Currently, pm_genpd_poweron() and pm_genpd_poweroff() need to take
the parent PM domain's lock in order to modify the parent's counter
of active subdomains in a nonracy way.  This causes the locking to be
considerably complex and in fact is not necessary, because the
subdomain counters may be implemented as atomic fields and they
won't have to be modified under a lock.

Replace the unsigned in sd_count field in struct generic_pm_domain
by an atomic_t one and modify the code in drivers/base/power/domain.c
to take this change into account.

This patch doesn't change the locking yet, that is going to be done
in a separate subsequent patch.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Commit c03f007a (OMAP: PM:
omap_device: add system PM methods for PM domain handling) mistakenly
used SET_SYSTEM_SLEEP_PM_OPS() when trying to configure custom methods
for the PM domains noirq methods.  Fix that by setting only the
suspend_noirq and resume_noirq methods with custom versions.

Note that all other PM domain methods (including the "normal"
suspend/resume methods) are populated using USE_PLATFORM_PM_SLEEP_OPS,
which configures them all to the default subsystem (platform_bus)
methods.
Reported-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The description of pm_runtime_irq_safe() has to be updated to follow
the code after commit 02b26774 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context).
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NKevin Hilman <khilman@ti.com>

Associate the HDMI clock together with LCDC1 on sh7372.

Without this patch Suspend-to-RAM hangs on the boards
AP4EVB and Mackerel. The code hangs in the LCDC driver
where the software is waiting forever for the hardware to
power down. By explicitly associating the HDMI clock with
LCDC1 we can make sure the HDMI clock is enabled using
Runtime PM whenever the driver is accessing the hardware.

This HDMI and LCDC1 dependency is documented in the sh7372
data sheet. Older kernels did work as expected but the
recently merged (3.1-rc)

 794d78fe drivers: sh: late disabling of clocks V2

introduced code to turn off clocks lacking software reference
which happens to include the HDMI clock that is needed by
LCDC1 to operate as expected.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Since sci_port_enable() and sci_port_disable() may be run with
interrupts off and they execute pm_runtime_get_sync() and
pm_runtime_put_sync(), respectively, the SCI device's
power.irq_safe flag has to be set to indicate that it is safe
to execute runtime PM callbacks for this device with interrupts off.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMagnus Damm <damm@opensource.se>

The lock member of struct pm_clk_data is of type struct mutex,
which is a problem, because the suspend and resume routines
defined in drivers/base/power/clock_ops.c cannot be executed
with interrupts disabled for this reason.  Modify
struct pm_clk_data so that its lock member is a spinlock.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMagnus Damm <damm@opensource.se>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: Add status and return request handlers
  HID: wiimote: Add drm request
  HID: wiimote: Register led class devices
  HID: wiimote: Correctly call HID open/close callbacks
  HID: wiimote: Simplify synchronization
  HID: usbhid: Add support for SiGma Micro chip
  HID: add support for new revision of Apple aluminum keyboard

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ad714x - read the interrupt status registers in a row
  Input: ad714x - use DMA-safe buffers for spi_write()
  Input: ad714x - fix endianness issues
  Input: ad714xx-spi - force SPI bus into the default 8-bit mode
  Input: ep93xx_keypad - add missing include of linux/module.h
  Input: tnetv107x-ts - add missing include of linux/module.h
  Input: max11801_ts - correct license statement
  Input: atmel_mxt_ts - report pressure information from the driver
  Input: bcm5974 - Add support for newer MacBookPro8,2
  Input: wacom - report id 3 returns 4 bytes of data
  Input: wacom - add WAC_MSG_RETRIES define
  Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
  Input: tegra-kbc - correct call to input_free_device
  Input: mpu3050 - correct call to input_free_device
  Input: bcm5974 - add support for touchpads found in MacBookAir4,2
  Input: mma8450 - fix module device table type
  Input: remove CLOCK_TICK_RATE from analog joystick driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
  fuse: mark pages accessed when written to
  fuse: delete dead .write_begin and .write_end aops
  fuse: fix flock
  fuse: fix non-ANSI void function notation

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Allow handling signals when stack is corrupted.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  bridge: fix a possible net_device leak
  net: Documentation: RFC 2553bis is now RFC 3493
  atm: br2684: Fix oops due to skb->dev being NULL
  ipv6: Fix ipv6_getsockopt for IPV6_2292PKTOPTIONS
  net: netdev-features.txt update to Documentation/networking/00-INDEX
  vlan: reset headers on accel emulation path
  forcedeth: call vlan_mode only if hw supports vlans
  via-velocity: remove non-tagged packet filtering
  bonding:reset backup and inactive flag of slave
  net_sched: fix port mirror/redirect stats reporting
  sit tunnels: propagate IPv6 transport class to IPv4 Type of Service
  gianfar: reduce stack usage in gianfar_ethtool.c
  net: minor update to Documentation/networking/scaling.txt
  net: add missing entries to Documentation/networking/00-INDEX
  gianfar: prevent buggy hw rx vlan tagging
  net: sh_eth: Fix build by forgot including linux/interrupt.h
  drivers/net/can/sja1000/plx_pci.c: eliminate double free
  usbnet/cdc_ncm: Don't use stack variables for DMA
  vmxnet3: Don't enable vlan filters in promiscuous mode.
  iwlagn: sysfs couldn't find the priv pointer
  ...

FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"
Reported-by: NHan-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, vdso: On system call restart after SYSENTER, use int $0x80
  x86, UV: Remove UV delay in starting slave cpus
  x86, olpc: Wait for last byte of EC command to be accepted

When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle
the arguments to match the int $0x80 calling convention.  This was
probably a design mistake, but it's what it is now.  This causes
errors if the system call as to be restarted.

For SYSENTER, we have to invoke the instruction from the vdso as the
return address is hardcoded.  Accordingly, we can simply replace the
jump in the vdso with an int $0x80 instruction and use the slower
entry point for a post-restart.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.com
Cc: <stable@kernel.org>

Fixes fallout due to the removal of the cast in commit aa462abe
("mm: fix __page_to_pfn for a const struct page argument")
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix tracing builds inside the source tree
  xfs: remove subdirectories
  xfs: don't expect xfs headers to be in subdirectories

* git://git.infradead.org/users/cbou/battery-3.1:
  s3c-adc-battery: Fix compilation error due to missing header (module.h)
  max8997_charger: Needs module.h
  max8998_charger: Needs module.h

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 HDMI-A Connector
  drm/ttm: ensure ttm for new node is bound before calling move_notify()
  drm/ttm: unbind ttm before destroying node in accel move cleanup
  drm/ttm: fix ttm_bo_add_ttm(user) failure path
  drm/radeon: Make vramlimit parameter actually work.
  drm/radeon: Explicitly print GTT/VRAM offsets on test failure.
  drm/radeon: Take IH ring into account for test size calculation.
  drm/radeon/alpha: Add Alpha support to Radeon DRM code

This reverts commit f3637a5f.

It turns out that this breaks several drivers, one example being OMAP
boards which use the on-board OMAP UARTs and the omap-serial driver that
will not boot to userspace after the commit.

Paul Walmsley reports that enabling CONFIG_DEBUG_SHIRQ reveals 'IRQ
handler type mismatch' errors:

  IRQ handler type mismatch for IRQ 74
  current handler: serial idle
  ...

and the reason is that setting IRQF_ONESHOT will now result in those
interrupt handlers having different IRQF flags, and thus being
unsharable.  So the commit log in the reverted commit:

                            "Since it is required for those users and
    there is no difference for others it makes sense to add this flag
    unconditionally."

is simply not true: there may not be any difference from a "actions at
irq time", but there is a *big* difference wrt this flag testing irq
management (see __setup_irq() in kernel/irq/manage.c).

One solution may be to stop verifying IRQF_ONESHOT in __setup_irq(), but
right now the safe course of action is to revert the change.  Let's
revisit this in a later merge window.
Reported-by: NPaul Walmsley <paul@pwsan.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Requested-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data
   to i2c bus for a HDMI connector that is not implemented/existent
   on the notebook's board.

   Fix by applying extented DDC probing for this connector.

   Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors
   with Improperly Wired DDC Lines

   Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook

   BugLink: http://bugs.launchpad.net/bugs/826677Signed-off-by: NThomas Reim <reimth@gmail.com>
Acked-by: NChris Routh <routhy@gmail.com>
Cc: <stable@kernel.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.

Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.

The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.

Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.

Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nouveau makes the assumption that if a TTM is bound there will be a mm_node
around for it and the backwards ordering here resulted in a use-after-free
on some eviction paths.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>