- 13 4月, 2014 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
-
git://git.infradead.org/users/eparis/audit由 Linus Torvalds 提交于
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
-
- 12 4月, 2014 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci由 Linus Torvalds 提交于
Pull async SCSI resume support from Dan Williams: "Allow disks and other devices to resume in parallel. This provides a tangible speed up for a non-esoteric use case (laptop resume): https://01.org/suspendresume/blogs/tebrandt/2013/hard-disk-resume-optimization-simpler-approach" * 'async-scsi-resume' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci: scsi: async sd resume
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from Neil Brown: "Just a few md patches for the 3.15 merge window. Not much happening in md/raid at the moment. Just a few bug fixes (one for -stable) and a couple of performance tweaks" * tag 'md/3.15' of git://neil.brown.name/md: raid5: get_active_stripe avoids device_lock raid5: make_request does less prepare wait md: avoid oops on unload if some process is in poll or select. md/raid1: r1buf_pool_alloc: free allocate pages when subsequent allocation fails. md/bitmap: don't abuse i_writecount for bitmap files.
-
git://git.infradead.org/users/willy/linux-nvme由 Linus Torvalds 提交于
Pull NVMe driver updates from Matthew Wilcox: "Various updates to the NVMe driver. The most user-visible change is that drive hotplugging now works and CPU hotplug while an NVMe drive is installed should also work better" * git://git.infradead.org/users/willy/linux-nvme: NVMe: Retry failed commands with non-fatal errors NVMe: Add getgeo to block ops NVMe: Start-stop nvme_thread during device add-remove. NVMe: Make I/O timeout a module parameter NVMe: CPU hot plug notification NVMe: per-cpu io queues NVMe: Replace DEFINE_PCI_DEVICE_TABLE NVMe: Fix divide-by-zero in nvme_trans_io_get_num_cmds NVMe: IOCTL path RCU protect queue access NVMe: RCU protected access to io queues NVMe: Initialize device reference count earlier NVMe: Add CONFIG_PM_SLEEP to suspend/resume functions
-
git://git.kvack.org/~bcrl/aio-next由 Linus Torvalds 提交于
Pull aio ctx->ring_pages migration serialization fix from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: v4 ensure access to ctx->ring_pages is correctly serialised for migration
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull second set of btrfs updates from Chris Mason: "The most important changes here are from Josef, fixing a btrfs regression in 3.14 that can cause corruptions in the extent allocation tree when snapshots are in use. Josef also fixed some deadlocks in send/recv and other assorted races when balance is running" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (23 commits) Btrfs: fix compile warnings on on avr32 platform btrfs: allow mounting btrfs subvolumes with different ro/rw options btrfs: export global block reserve size as space_info btrfs: fix crash in remount(thread_pool=) case Btrfs: abort the transaction when we don't find our extent ref Btrfs: fix EINVAL checks in btrfs_clone Btrfs: fix unlock in __start_delalloc_inodes() Btrfs: scrub raid56 stripes in the right way Btrfs: don't compress for a small write Btrfs: more efficient io tree navigation on wait_extent_bit Btrfs: send, build path string only once in send_hole btrfs: filter invalid arg for btrfs resize Btrfs: send, fix data corruption due to incorrect hole detection Btrfs: kmalloc() doesn't return an ERR_PTR Btrfs: fix snapshot vs nocow writting btrfs: Change the expanding write sequence to fix snapshot related bug. btrfs: make device scan less noisy btrfs: fix lockdep warning with reclaim lock inversion Btrfs: hold the commit_root_sem when getting the commit root during send Btrfs: remove transaction from send ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
Pull 9p changes from Eric Van Hensbergen: "A bunch of updates and cleanup within the transport layer, particularly with a focus on RDMA" * tag 'for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9pnet_rdma: check token type before int conversion 9pnet: trans_fd : allocate struct p9_trans_fd and struct p9_conn together. 9pnet: p9_client->conn field is unused. Remove it. 9P: Get rid of REQ_STATUS_FLSH 9pnet_rdma: add cancelled() 9pnet_rdma: update request status during send 9P: Add cancelled() to the transport functions. net: Mark function as static in 9p/client.c 9P: Add memory barriers to protect request fields over cb/rpc threads handoff
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi由 Linus Torvalds 提交于
Pull spi fixes from Mark Brown: "A few driver specific fixes, the main one being the fix for handling of complete callbacks that are open coded in individual drivers to allow callers to omit the completion. As we move things into the core that sort of issue should become less and less common" * tag 'spi-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: qup: Depend on ARCH_QCOM spi: efm32: Update binding document to make "efm32,location" property optional spi: omap2-mcspi: Convert to use devm_kcalloc spi: Always check complete callback before calling it
-
由 Linus Torvalds 提交于
Merge tag 'regulator-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes that have come in over the merge window, all only relevant for the specific driver" * tag 'regulator-v3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: bcm590xx: Set n_voltages for linear reg regulator: s5m8767: Fix carried over ena_gpio assignment regulator: s2mps11: Don't check enable_shift before setting enable ramp rate regulator: s2mpa01: Don't check enable_shift before setting enable ramp rate
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap fix from Mark Brown: "regmap: Fix for nodev mode Add mising braces so that the nodev mode actually works (which was a bit of an oversight)" Testing schmesting. We don't need not steenking testing. We have deadlines to beat, and new code to write. * tag 'regmap-v3.15-nodev' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: adds missing braces in regmap_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more ACPI and power management fixes and updates from Rafael Wysocki: "This is PM and ACPI material that has emerged over the last two weeks and one fix for a CPU hotplug regression introduced by the recent CPU hotplug notifiers registration series. Included are intel_idle and turbostat updates from Len Brown (these have been in linux-next for quite some time), a new cpufreq driver for powernv (that might spend some more time in linux-next, but BenH was asking me so nicely to push it for 3.15 that I couldn't resist), some cpufreq fixes and cleanups (including fixes for some silly breakage in a couple of cpufreq drivers introduced during the 3.14 cycle), assorted ACPI cleanups, wakeup framework documentation fixes, a new sysfs attribute for cpuidle and a new command line argument for power domains diagnostics. Specifics: - Fix for a recently introduced CPU hotplug regression in ARM KVM from Ming Lei. - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32 cpufreq drivers introduced during the 3.14 cycle (-stable material) from Chen Gang and Viresh Kumar. - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits from Gautham R Shenoy and Srivatsa S Bhat. - Exynos cpufreq driver fix preventing it from being included into multiplatform builds that aren't supported by it from Sachin Kamat. - cpufreq cleanups related to the usage of the driver_data field in struct cpufreq_frequency_table from Viresh Kumar. - cpufreq ppc driver cleanup from Sachin Kamat. - Intel BayTrail support for intel_idle and ACPI idle from Len Brown. - Intel CPU model 54 (Atom N2000 series) support for intel_idle from Jan Kiszka. - intel_idle fix for Intel Ivy Town residency targets from Len Brown. - turbostat updates (Intel Broadwell support and output cleanups) from Len Brown. - New cpuidle sysfs attribute for exporting C-states' target residency information to user space from Daniel Lezcano. - New kernel command line argument to prevent power domains enabled by the bootloader from being turned off even if they are not in use (for diagnostics purposes) from Tushar Behera. - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven. - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler Paul. - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi, Zhihui Zhang, Hanjun Guo" * tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) ACPI: Update the ACPI spec information in Kconfig arm, kvm: fix double lock on cpu_add_remove_lock cpuidle: sysfs: Export target residency information cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes PM / domains: Add pd_ignore_unused to keep power domains enabled ACPI / dock: Drop dock_device_ids[] table ACPI / video: Favor native backlight interface for ThinkPad Helix ACPI / thermal: Fix wrong variable usage in debug statement ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pullx86 core platform updates from Peter Anvin: "This is the x86/platform branch with the objectionable IOSF patches removed. What is left is proper memory handling for Intel GPUs, and a change to the Calgary IOMMU code which will be required to make kexec work sanely on those platforms after some upcoming kexec changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, calgary: Use 8M TCE table size by default x86/gpu: Print the Intel graphics stolen memory range x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms x86/gpu: Add vfunc for Intel graphics stolen memory base address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "This is a collection of minor fixes for x86, plus the IRET information leak fix (forbid the use of 16-bit segments in 64-bit mode)" NOTE! We may have to relax the "forbid the use of 16-bit segments in 64-bit mode" part, since there may be people who still run and depend on 16-bit Windows binaries under Wine. But I'm taking this in the current unconditional form for now to see who (if anybody) screams bloody murder. Maybe nobody cares. And maybe we'll have to update it with some kind of runtime enablement (like our vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already need to tweak). * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels efi: Pass correct file handle to efi_file_{read,close} x86/efi: Correct EFI boot stub use of code32_start x86/efi: Fix boot failure with EFI stub x86/platform/hyperv: Handle VMBUS driver being a module x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround x86, CMCI: Add proper detection of end of CMCI storms
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull second set of ARM changes from Russell King: "This is the remainder of the ARM changes for this merge window. Included in this request are: - fixes for kprobes for big-endian support - fix tracing in soft_restart - avoid phys address overflow in kdump code - fix reporting of read-only pmd bits in kernel page table dump - remove unnecessary (and possibly buggy) call to outer_flush_all() - fix a three sparse warnings (missing header file for function prototypes) - fix pj4 crashing single zImage (thanks to arm-soc merging changes which enables this with knowledge that the corresponding fix had not even been submitted for my tree before the merge window opened) - vfp macro cleanups - dump register state on undefined instruction userspace faults when debugging" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: Dump the registers on undefined instruction userspace faults ARM: 8018/1: Add {inc,dec}_preempt_count asm macros ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h ARM: 8016/1: Check cpu id in pj4_cp0_init. ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7 ARM: add missing system_misc.h include to process.c ARM: 8009/1: dcscb.c: remove call to outer_flush_all() ARM: 8014/1: mm: fix reporting of read-only PMD bits ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr ARM: 8010/1: avoid tracers in soft_restart ARM: kprobes-test: Workaround GAS .align bug ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses ARM: probes: fix instruction fetch order with <asm/opcodes.h>
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
Pull Microblaze updates from Michal Simek: - use asm-generic/io.h and fix intc/timer code - clean platform handling - enable some syscalls * tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Use asm-generic/io.h microblaze: Remove platform folder microblaze: Remove generic platform microblaze: Sort Kconfig options microblaze: Move DTS file to common location at boot/dts folder microblaze: Fix compilation failure because of release_thread microblaze: Fix sparse warning because of missing cpu.h header microblaze: Make timer driver endian aware microblaze: Make intc driver endian aware microblaze: Wire-up new system calls sched_setattr/getattr microblaze: Wire-up preadv/pwritev in syscall table microblaze: Enable pselect6 syscall microblaze: Drop architecture-specific declaration of early_printk microblaze: Rename global function heartbeat()
-
由 H. Peter Anvin 提交于
The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 32-bit mode. Since 16-bit support is somewhat crippled anyway on a 64-bit kernel (no V86 mode), and most (if not quite all) 64-bit processors support virtualization for the users who really need it, simply reject attempts at creating a 16-bit segment when running on top of a 64-bit kernel. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kicdm89kzw9lldryb1br9od0@git.kernel.org Cc: <stable@vger.kernel.org>
-
- 11 4月, 2014 23 次提交
-
-
由 Russell King 提交于
-
由 Russell King 提交于
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Wang Shilong 提交于
fs/btrfs/scrub.c: In function 'get_raid56_logic_offset': fs/btrfs/scrub.c:2269: warning: comparison of distinct pointer types lacks a cast fs/btrfs/scrub.c:2269: warning: right shift count >= width of type fs/btrfs/scrub.c:2269: warning: passing argument 1 of '__div64_32' from incompatible pointer type Since @rot is an int type, we should not use do_div(), fix it. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Ingo Molnar 提交于
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: "* Fix EFI boot regression introduced during the merge window where the firmware was reading random values from the stack because we were passing a pointer to the wrong object type. * Kernel corruption has been reported when booting with the EFI boot stub which was tracked down to setting a bogus value for bp->hdr.code32_start, resulting in corruption during relocation. * Olivier Martin reported that the wrong file handles were being passed to efi_file_(read|close), which works for x86 by luck due to the way that the FAT driver is implemented, but doesn't work on ARM." Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 WANG Chao 提交于
New kexec-tools wants to pass kdump kernel needed memmap via E820 directly, instead of memmap=exactmap. This makes saved_max_pfn not be passed down to 2nd kernel. To keep 1st kernel and 2nd kernel using the same TCE table size, Muli suggest to hard code the size to max (8M). We can't get rid of saved_max_pfn this time, for backward compatibility with old first kernel and new second kernel. However new first kernel and old second kernel can not work unfortunately. v2->v1: - retain saved_max_pfn so new 2nd kernel can work with old 1st kernel from Vivek Signed-off-by: NWANG Chao <chaowang@redhat.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Acked-by: NMuli Ben-Yehuda <mulix@mulix.org> Acked-by: NJon Mason <jdmason@kudzu.us> Link: http://lkml.kernel.org/r/1394463120-26999-1-git-send-email-chaowang@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Steven Rostedt (Red Hat) 提交于
The debugfs tracing README file lists all the function triggers except for dump and cpudump. These should be added too. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Mark Brown 提交于
Merge remote-tracking branches 'spi/fix/complete', 'spi/fix/efm32', 'spi/fix/omap2-mcspi' and 'spi/fix/qup' into spi-linus
-
由 Mark Brown 提交于
spi: Updates for v3.15 A busy release for both cleanups and new drivers this time along with further factoring out of replicated code into the core: - Provide support in the core for DMA mapping transfers - essentially all drivers weren't implementing this properly, now there's no excuse. - Dual and quad mode support for spidev. - Fix handling of cs_change in the generic implementation. - Remove the S3C_DMA code from the s3c64xx driver now that all the platforms using it have been converted to dmaengine. - Lots of improvements to the Renesas SPI controllers. - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga. - Removal of the bitrotted ti-ssp driver. # gpg: Signature made Mon 31 Mar 2014 12:03:09 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
Merge remote-tracking branches 'regulator/fix/bcm590xx', 'regulator/fix/s2m' and 'regulator/fix/s5m8767' into regulator-linus
-
由 Mark Brown 提交于
regulator: Updates for v3.15 This release has lots and lots of small cleanups and fixes in the regulator subsystem, mainly cleaning up some bad patterns that got duplicated in DT code, but otherwise very little of note outside of the scope of the relevant drivers: - Support for configuration of the initial state for gpio regulators with multi-voltage support. - Support for calling regulator_set_voltage() on fixed regulators. - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some ST boards and TI TPS65218. # gpg: Signature made Mon 31 Mar 2014 12:29:14 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Dan Williams 提交于
async_schedule() sd resume work to allow disks and other devices to resume in parallel. This moves the entirety of scsi_device resume to an async context to ensure that scsi_device_resume() remains ordered with respect to the completion of the start/stop command. For the duration of the resume, new command submissions (that do not originate from the scsi-core) will be deferred (BLKPREP_DEFER). It adds a new ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain) as a container of these operations. Like scsi_sd_probe_domain it is flushed at sd_remove() time to ensure async ops do not continue past the end-of-life of the sdev. The implementation explicitly refrains from reusing scsi_sd_probe_domain directly for this purpose as it is flushed at the end of dpm_resume(), potentially defeating some of the benefit. Given sdevs are quiesced it is permissible for these resume operations to bleed past the async_synchronize_full() calls made by the driver core. We defer the resolution of which pm callback to call until scsi_dev_type_{suspend|resume} time and guarantee that the callback parameter is never NULL. With this in place the type of resume operation is encoded in the async function identifier. There is a concern that async resume could trigger PSU overload. In the enterprise, storage enclosures enforce staggered spin-up regardless of what the kernel does making async scanning safe by default. Outside of that context a user can disable asynchronous scanning via a kernel command line or CONFIG_SCSI_SCAN_ASYNC. Honor that setting when deciding whether to do resume asynchronously. Inspired by Todd's analysis and initial proposal [2]: https://01.org/suspendresume/blogs/tebrandt/2013/hard-disk-resume-optimization-simpler-approach Cc: Len Brown <len.brown@intel.com> Cc: Phillip Susi <psusi@ubuntu.com> [alan: bug fix and clean up suggestion] Acked-by: NAlan Stern <stern@rowland.harvard.edu> Suggested-by: NTodd Brandt <todd.e.brandt@linux.intel.com> [djbw: kick all resume work to the async queue] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Tim Kryger 提交于
Fix the macro used to define linear range regulators to include the number of voltages. Signed-off-by: NTim Kryger <tim.kryger@linaro.org> Acked-by: NMatt Porter <mporter@linaro.org> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Chris Metcalf 提交于
On systems with CONFIG_COMPAT we introduced the new requirement that audit_classify_compat_syscall() exists. This wasn't true for everything (apparently not for "tilegx", which I know less that nothing about.) Instead of wrapping the preprocessor optomization with CONFIG_COMPAT we should have used the new CONFIG_AUDIT_COMPAT_GENERIC. This patch uses that config option to make sure only arches which intend to implement this have the requirement. This works fine for tilegx according to Chris Metcalf Signed-off-by: NEric Paris <eparis@redhat.com>
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
Pull exofs updates from Boaz Harrosh: "Trivial updates to exofs for 3.15-rc1 Just a few fixes sent by people" * 'for-linus' of git://git.open-osd.org/linux-open-osd: MAINTAINERS: Update email address for bhalevy fs: Mark functions as static in exofs/ore_raid.c fs: Mark function as static in exofs/super.c
-
由 Keith Busch 提交于
For commands returned with failed status, queue these for resubmission and continue retrying them until success or for a limited amount of time. The final timeout was arbitrarily chosen so requests can't be retried indefinitely. Since these are requeued on the nvmeq that submitted the command, the callbacks have to take an nvmeq instead of an nvme_dev as a parameter so that we can use the locked queue to append the iod to retry later. The nvme_iod conviently can be used to track how long we've been trying to successfully complete an iod request. The nvme_iod also provides the nvme prp dma mappings, so I had to move a few things around so we can keep those mappings. Signed-off-by: NKeith Busch <keith.busch@intel.com> [fixed checkpatch issue with long line] Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Keith Busch 提交于
Some programs require HDIO_GETGEO work, which requires we implement getgeo. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Dan McLeran 提交于
Done to ensure nvme_thread is not running when there are no devices to poll. Signed-off-by: NDan McLeran <daniel.mcleran@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Keith Busch 提交于
Increase the default timeout to 30 seconds to match SCSI. Signed-off-by: NKeith Busch <keith.busch@intel.com> [use byte instead of ushort] Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Keith Busch 提交于
Registers with hot cpu notification to rebalance, and potentially allocate additional, io queues. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Keith Busch 提交于
The device's IO queues are associated with CPUs, so we can use a per-cpu variable to map the a qid to a cpu. This provides a convienient way to optimally assign queues to multiple cpus when the device supports fewer queues than the host has cpus. The previous implementation may have assigned these poorly in these situations. This patch addresses this by sharing queues among cpus that are "close" together and should have a lower lock contention penalty. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Harald Hoyer 提交于
Given the following /etc/fstab entries: /dev/sda3 /mnt/foo btrfs subvol=foo,ro 0 0 /dev/sda3 /mnt/bar btrfs subvol=bar,rw 0 0 you can't issue: $ mount /mnt/foo $ mount /mnt/bar You would have to do: $ mount /mnt/foo $ mount -o remount,rw /mnt/foo $ mount --bind -o remount,ro /mnt/foo $ mount /mnt/bar or $ mount /mnt/bar $ mount --rw /mnt/foo $ mount --bind -o remount,ro /mnt/foo With this patch you can do $ mount /mnt/foo $ mount /mnt/bar $ cat /proc/self/mountinfo 49 33 0:41 /foo /mnt/foo ro,relatime shared:36 - btrfs /dev/sda3 rw,ssd,space_cache 87 33 0:41 /bar /mnt/bar rw,relatime shared:74 - btrfs /dev/sda3 rw,ssd,space_cache Signed-off-by: NChris Mason <clm@fb.com>
-
由 Matt Fleming 提交于
We're currently passing the file handle for the root file system to efi_file_read() and efi_file_close(), instead of the file handle for the file we wish to read/close. While this has worked up until now, it seems that it has only been by pure luck. Olivier explains, "The issue is the UEFI Fat driver might return the same function for 'fh->read()' and 'h->read()'. While in our case it does not work with a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our case, we return a different pointer when reading a directory and reading a file." Fixing this actually clears up the two functions because we can drop one of the arguments, and instead only pass a file 'handle' argument. Reported-by: NOlivier Martin <olivier.martin@arm.com> Reviewed-by: NOlivier Martin <olivier.martin@arm.com> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-