- 20 5月, 2012 10 次提交
-
-
由 Andy Adamson 提交于
Let the MDS know that you are redirecting I/O from pNFS to MDS. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The DS has a connection error (invalid deviceid). Drain the fore channel slot table waitq. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state. Reset the task for io through the MDS if the deviceid is invalid. The reset functions put the io pages through the pageio layer which has the advantage of re-coalescing which allows for the MDS and DS having different r/wsizes. Exit the awakened task without executing the rpc_call_done routine. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Replaced by filelayout_reset_write and filelayout_reset_read Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This prevents the use of any layout for i/o that references the deviceid. I/O is redirected through the MDS. Redirect the unhandled failed I/O to the MDS without marking either the layout or the deviceid invalid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Set the recovery parameters for data servers. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS file layout to quickly try the MDS or perhaps another DS. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The invalid layout bits are should only be used to block LAYOUTGETs. Do not invalidate a layout on deviceid invalidation. Do not invalidate a layout on un-handled READ, WRITE, COMMIT errors. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY is no longer needed. Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING. An invalid device prevents pNFS io. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Matthew Treinish 提交于
Simplified error gotos to make it slightly easier to read, it doesn't affect the functionality of the routine. Signed-off-by: NMatthew Treinish <treinish@linux.vnet.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
We can't create new files or directories here from userspace, so let's not pretend that this directory is writable. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 5月, 2012 17 次提交
-
-
由 Bryan Schumaker 提交于
Most users will use NFS v3 or possibly v4 so this makes it easier for them. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
With this patch NFS v2 can be disabled during Kconfig. I default the option to "y" to match the current behavior. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
In theory, NFS v3 can have different error versions than NFS v2. v4 is already using its own nfs4_stat_to_errno() to map error codes, so rather than create something in the generic client for v2 and v3 to share I instead give v3 its own function. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This allows me to use the filehandle allocated in nfs_fs_mount() for nfs v4 mounts instead of allocating a new one. Rather than change nfs4_mount() to look almost exactly like nfs_fs_mount(), I instead remove the function. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This new function chooses between the v2/3 parser and the v4 parser by filesystem type. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The v2/3 and v4 cases were very similar, with just a few parameters changed. This makes it easy to share code. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This function returns the same same return type as nfs4_try_mount() so they two can be more easily substituted. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This field is unconditionally set while parsing mount data, so there is no need to fill it in here. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
At this point, there are only a few small differences between these two functions. I can set a few function pointers in the nfs_mount_info struct to get around these differences. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The only difference between nfs_xdev_mount() and nfs4_xdev_mount() is the clone_super() function called to clone the super block. I can combine these two functions by using the fill_super field in the mount_info structure. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The nfs4_remote_mount() function was only slightly different from the nfs_fs_mount() function used by the generic client. I created a new nfs_mount_info structure to set different parameters to help combine these functions. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This flag is numerically equivalent to NFS_MOUNT_UNSHARED, so I can remove it to make collapsing functions more straightforward. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I intend on creating a single nfs_fs_mount() function used by all our mount paths. To avoid checking between new mounts and clone mounts, I instead pass both structures to a new function in super.c that finds the cache key and then looks up the super cookie. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch splits out the NFS v4 specific functionality of nfs4_get_root() into its own rpc_op called by the generic client, and leaves nfs4_proc_get_rootfh() as its own stand alone function. This also allows me to change nfs4_remote_mount(), nfs4_xdev_mount() and nfs4_remote_referral_mount() to use the generic client's nfs_get_root() function. Later patches in this series will collapse these functions into one common function, so using the same get_root() function everywhere simplifies future changes. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This function is really getting the root filehandle and not the root dentry of the filesystem. I also removed the rpc_ops lookup from nfs4_get_rootfh() under the assumption that if we reach this function then we already know we are using NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 5月, 2012 5 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
Function rename to ensure that the functionality of nfs_unlock_request() mirrors that of nfs_lock_request(). Then let nfs_unlock_and_release_request() do the work of what used to be called nfs_unlock_request()... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
We only have two places where we need to grab a reference when trying to lock the nfs_page. We're better off making that explicit. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
We now hold a reference to the nfs_page across the calls to nfs_set_page_writeback and nfs_end_page_writeback, and that means we already have a reference to the struct page. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
由 Trond Myklebust 提交于
We have to unlock the nfs_page before we call nfs_end_page_writeback to avoid races with functions that expect the page to be unlocked when PG_locked and PG_writeback are not set. The problem is that nfs_unlock_request also releases the nfs_page, causing a deadlock if the release of the nfs_open_context triggers an iput() while the PG_writeback flag is still set... The solution is to separate the unlocking and release of the nfs_page, so that we can do the former before nfs_end_page_writeback and the latter after. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com>
-
- 09 5月, 2012 3 次提交
-
-
由 Trond Myklebust 提交于
Since even filemap_flush() needs to lock pages that are dirty, we cannot risk calling it from the state manager context. Therefore, we need to move the call to filemap_flush() to nfs_async_inode_return_delegation(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The assumption is that if you are in a situation where you need to return the delegation, then you should probably stop caching the data anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we hold a delegation then we know that it should be safe to continue to cache the data beyond the close(). However since the process that wrote the data may die after close(), we may still want to send the data to server before those RPCSEC_GSS credentials expire. We therefore compromise by starting writeback to the server, but don't wait for completion. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Fix the following sparse warnings: fs/nfs/direct.c:221:6: warning: symbol 'nfs_direct_readpage_release' was not declared. Should it be static? fs/nfs/read.c:38:43: warning: non-ANSI function declaration of function 'nfs_readhdr_alloc' fs/nfs/objlayout/objio_osd.c:214:5: warning: symbol '__alloc_objio_seg' was not declared. Should it be static? Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com> Cc: Boaz Harrosh <bharrosh@panasas.com>
-
由 Trond Myklebust 提交于
Fix the following compile warnings: fs/nfs/direct.c: In function 'nfs_direct_read_schedule_segment': fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:325:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:352:27: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c: In function 'nfs_direct_write_schedule_segment': fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:622:11: warning: comparison of distinct pointer types lacks a cast [enabled by default] fs/nfs/direct.c:650:27: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Fred Isaman <iisaman@netapp.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
- 02 5月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
While the use of READDIRPLUS is significantly more efficient than READDIR followed by many LOOKUP calls, it is still less efficient than just READDIR if the attributes are not required. This patch tracks when lookups are attempted on the directory, and uses that information to selectively disable READDIRPLUS on that directory. The first 'readdir' call is always served using READDIRPLUS. Subsequent calls only use READDIRPLUS if there was a successful lookup or revalidation on a child in the mean time. Credit for the original idea should go to Neil Brown. See: http://www.spinics.net/lists/linux-nfs/msg19996.html However, the implementation in this patch differs from Neil's in that it focuses on tracking lookups rather than calls to stat(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Neil Brown <neilb@suse.de>
-