Call free_irq() before releasing others to avoid races when
shared irq is issued.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call iounmap after free_irq to avoid invalid accesses in the
shared irq.  The patch is taken from
	https://bugzilla.novell.com/show_bug.cgi?id=167869Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds a whitelist entry for the digital audio input of the Voodoo TV 200.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

this is about coverity id #100.
It seems the if statement is negated, since the else branch calls
remove_info() with sflist->currsf as a parameter where it gets
dereferenced.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a typo in  'PC Speaker Playback Switch' control name.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

To permit use, in ice1712, of the mpu401 info flags recently added to
mpu401_uart, adds info_flags in snd_ice1712_card_info so that additional
flags can be set, if desired.  'MPU401_INFO_INTEGRATED' is always set with
the ice1712.  The flags are passed on to snd_mpu401_uart_new().
_INFO_OUTPUT is set for DMX6fire mpu2.
Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Changed the assigned model for HP dc7600 with ALC260 codec
to match better with the actual I/O assignment.
Patch taken from ALSA bug#2157.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds support for useable front audio channels,
user controllable headphone channel and optical output.
From: Anho Ki
Signed-off-by: NMatt Taylor <mwtaylor@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix 64bit address of MPU401 MMIO port on au88x0 chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Consumer AC97 is not used by the Terratec DMX6fire, but eeprom bit indicates
it is; change the stored value to disable failing consumer mode.
Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the 5th argument of snd_mpu401_uart_new() to bit flags
instead of a boolean.  The argument takes bits that consist of
MPU401_INFO_XXX flags.
The callers that used the value 1 there are replaced with
MPU401_INFO_INTEGRATED.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the compilation with hdsp driver built in kernel.
The traditional hwdep loader is used in this case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the description of cs5535audio driver in ALSA-Configuraiton.txt.
Now it supports only single device.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As per Takashi's feedback, this is a cleanup to make cs5535audio be
single device per system. The diff is against 2.6.17-rc4 with
Takashi's patch adding the module_params for index, id and enable.
Signed-off-by: NJaya Kumar <jayakumar.alsa@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- fold lines and fix spaces to follow the standard style
- added some comments
- moved EXPORT_SYMBOL() near the definition
- some code clean up
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix a typo introduced by the last fix.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove an unnecessary ENTER_UART instruction during au88x0 init as it makes
the first/subsequent midi open to fail.
Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some devices don't have the required class-specific endpoint descriptors.
Instead of making this case an error, this patch makes the driver guess the
endpoint attributes.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Use the basic init verbs for ALC260 instead of hp init verbs
since hp init verbs seem incomplete and not working on some machines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed zero-initializations of static variables.
A tiny optimization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the draining of PCM capture stream in the PCM middle layer.
snd_pcm_drain() ignored capture streams, but it should change
the state to SNDRV_PCM_DRAINING.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the description of snd-hda-intel driver in ALSA-Configuration.txt
document.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for the ATI RS600 HDMI audio device. It has a one-stream
pure digital stereo codec that isn't handled by the generic codec
support.
Signed-off-by: NFelix Kuehling <fkuehlin@ati.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Scope braces were not done the One True Kernel Way.
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- add 3D sound pre-3D/post-3D switch, as seen in standard AC-97
- rename controls to shorter and more accurate strings
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- add suspend/resume handlers
- fix problem (private_data members not set)
Playing a file while suspending will resume correctly with this patch,
so I assume the hardware to get fully correctly reinitialized with
this patch.
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed rwlock around snd_iprintf() in sound core part.
Replaced with mutex.
Also, make mutex and flags static variables with addition of
snd_card_locked() function (just for sound.c).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the handling of capture controls on ALC882 3/6-stack models.
Now the driver checks the availability of NID 07h.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove obsolete descriptions about the dependency on CONFIG_ISA
for vxpocket and pdaudiocf drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing support for Sony Vaio VGN-S3HP with ALC260 codec.
The patch taken from ALSA bug#2101.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a bug in rme96 driver that the full-duplex on OSS emulation
doesn't work due to the invalid period size parameter.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for some audio quirks of the Apple Mac Mini (early 2006)
Signed-off-by: NSam Revitch <samr7@cs.washington.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch rewrites the remote control code to use a table for
the peculiarities of the various SB models, and adds support
for a third model.
Signed-off-by: NRaimonds Cicans <ray@vardes.lv>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Enable the support of mpu401 PCI port only when mpu_port=1 module
option is given, i.e. disabled as default.
It turned out that the check of integrated midi port isn't perfect
and caused hang-ups on some boards.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a typo in writing-an-alsa-driver document.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the order in vortex_probe to set the card details before creating the
components, meaning for example that card->shortname is available when
registering the midi port.
I have also added extra to card->shortname, and a line to overwrite the midi
name following snd_mpu401_uart_new.
Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Adds support for the 9227/9228/9229 sigmatel hda codecs.
Signed-off-by: NMatt Porter <mporter@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed the master mute switch on VAIO laptops with STAC7661
codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added missing module_param*() and MODULE_PARM_DESC() for
cs5535audio driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a workaround for ASUS A6KM board that requires EAPD
rather than SPDIF-in.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>