sctp_sendmsg_new_asoc and SCTP_ADDR_OVER check is only necessary
when daddr is set, so move them up to if (daddr) statement.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch mostly is to:

  - rename sinfo_flags as sflags, to make the indents look better, and
    also keep consistent with other sctp_sendmsg_xx functions.

  - replace new_asoc with bool new, no need to define a pointer here,
    as if new_asoc is set, it must be asoc.

  - rename the 'out_nounlock:' as 'out', shorter and nicer.

  - remove associd, only one place is using it now, just use
    sinfo->sinfo_assoc_id directly.

  - remove 'cmsgs' initialization in sctp_sendmsg, as it will be done
    in sctp_sendmsg_parse.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now sctp_assoc_lookup_paddr can only be called only if daddr has
been set. But if daddr has been set, sctp_endpoint_lookup_assoc
would be done, where it could already have the transport.

So this unnecessary transport looking up should be removed, but
only reset transport as NULL when SCTP_ADDR_OVER is not set for
UDP type socket.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for trying to get sinfo from
asoc into sctp_sendmsg_update_sinfo.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for parsing msghdr and checking
sk into sctp_sendmsg_parse.

Note that different from before, 'sinfo' in sctp_sendmsg won't
be NULL any more. It gets the value either from cmsgs->srinfo,
cmsgs->sinfo or asoc. With it, the 'sinfo' and 'fill_sinfo_ttl'
check can be removed from sctp_sendmsg.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for trying to get daddr from
msg->msg_name into sctp_sendmsg_get_daddr.

Note that after adding 'daddr', 'to' and 'msg_name' can be
deleted.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for checking sinfo_flags on one asoc
after this asoc has been found into sctp_sendmsg_check_sflags.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for creating a new asoc if
no asoc was found into sctp_sendmsg_new_asoc.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move the codes for checking and sending on
one asoc after this asoc has been found or created into
sctp_sendmsg_to_asoc.

Note that 'err != -ESRCH' check is for the case that asoc is
freed when waiting for tx buffer in sctp_sendmsg_to_asoc.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-03-03

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Extend bpftool to build up CFG information of eBPF programs and add an
   option to dump this in DOT format such that this can later be used with
   DOT graphic tools (xdot, graphviz, etc) to visualize it. Part of the
   analysis performed is sub-program detection and basic-block partitioning,
   from Jiong.

2) Multiple enhancements for bpftool's batch mode, more specifically the
   parser now understands comments (#), continuation lines (\), and arguments
   enclosed between quotes. Also, allow to read from stdin via '-' as input
   file, all from Quentin.

3) Improve BPF kselftests by i) unifying the rlimit handling into a helper
   that is then used by all tests, and ii) add support for testing tail calls
   to test_verifier plus add tests covering all corner cases. The latter is
   especially useful for testing JITs, from Daniel.

4) Remove x64 JIT's bpf_flush_icache() since flush_icache_range() is a noop
   on x64, from Daniel.

5) Fix one more occasion in BPF samples where we do not detach the BPF program
   from the cgroup after completion, from Prashant.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the ARRAY_SIZE macro on a couple of arrays to determine
size of the arrays. Also fix up alignment to clean up a checkpatch
warning. Improvement suggested by Coccinelle.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add TP Congestion Map entry for single-port T6 cards.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2018-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Only a few new things:
 * hwsim net namespace stuff from Kirill Tkhai
 * A-MSDU support in fast-RX
 * 4-addr mode support in fast-RX
 * support for a spec quirk in Add-BA negotiation
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Error code is already returned earlier if filter exists
at specified location. So, remove dead code trying to
free existing filter.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations allocate and destroy IDA identifier,
and these actions are synchronized by IDA subsystem locks.
Exit method removes mac80211_hwsim_data enteries from the lists,
and this is synchronized by hwsim_radio_lock with the rest
parallel pernet_operations. Also it queues destroy_radio()
work, and these work already may be executed in parallel
with any pernet_operations (as it's a work :). So, we may
mark these pernet_operations as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

hwsim_netgroup counter is declarated as int, and it is incremented
every time a new net is created. After sizeof(int) net are created,
it will overflow, and different net namespaces will have the same
identifier. This patch fixes the problem by introducing IDA instead
of int counter. IDA guarantees, all the net namespaces have the uniq
identifier.

Note, that after we do ida_simple_remove() in hwsim_exit_net(),
and we destroy the ID, later there may be executed destroy_radio()
from the workqueue. But destroy_radio() does not use the ID, so it's OK.

Out of bounds of this patch, just as a report to wireless subsystem
maintainer, destroy_radio() increaments hwsim_radios_generation
without hwsim_radio_lock, so this may need one more patch to fix.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Quentin Monnet says:

====================
Several enhancements for bpftool batch mode are introduced in this series.

More specifically, input files for batch mode gain support for:
  * comments (starting with '#'),
  * continuation lines (after a line ending with '\'),
  * arguments enclosed between quotes.

Also, make bpftool able to read from standard input when "-" is provided as
input file name.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Improve argument parsing from batch input files in order to support
arguments enclosed between single (') or double quotes ("). For example,
this command can now be parsed in batch mode:

    bpftool prog dump xlated id 1337 file "/tmp/my file with spaces"

The function responsible for parsing command arguments is copied from
its counterpart in lib/utils.c in iproute2 package.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Make bpftool read its command list from standard input when the name if
the input file is a single dash.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add support for continuation lines, such as in the following example:

    prog show
    prog dump xlated \
        id 1337 opcodes

This patch is based after the code for support for continuation lines
from file lib/utils.c from package iproute2.

"Lines" in error messages are renamed as "commands", as we count the
number of commands (but we ignore empty lines, comments, and do not add
continuation lines to the count).
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Replace '#' by '\0' in commands read from batch files in order to avoid
processing the remaining part of the line, thus allowing users to use
comments in the files.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Eric Dumazet says:

====================
tcp_bbr: more GSO work

Playing with r8152 USB 1Gbit NIC, on both USB2 and USB3 slots, I found
that BBR was performing poorly, because of TSO being limited to 16KB

This patch series makes sure BBR is not under estimating number of
packets that are needed to fill the pipe when a device has suboptimal
TSO limits.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its value is computed then immediately used,
there is no need to store it.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is second part of dealing with suboptimal device gso parameters.
In first patch (350c9f48 "tcp_bbr: better deal with suboptimal GSO")
we dealt with devices having low gso_max_segs

Some devices lower gso_max_size from 64KB to 16 KB (r8152 is an example)

In order to probe an optimal cwnd, we want BBR being not sensitive
to whatever GSO constraint a device can have.

This patch removes tso_segs_goal() CC callback in favor of
min_tso_segs() for CC wanting to override sysctl_tcp_min_tso_segs

Next patch will remove bbr->tso_segs_goal since it does not have
to be persistent.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
Jiong says:

This patch set is an application of CFG information on eBPF program
visualization. It presents some initial code for building CFG information
from eBPF instruction sequences.

After we get eBPF program bytecode, we do sub-program detection and
basic-block partition. These information then are visualized into DOT
graph.

The user could use any DOT graphic tools (xdot, graphviz etc) to view it.

For example:

  bpftool prog dump xlated id 2 visual &>output.dot

  [xdot | dotty] output.dot
  dot -Tpng -o output.png

This initial patch set hasn't tuned much on the dot description layout
nor decoration, we could improve them later once the direction of the patch
set is agreed on. We could also visualize some static analysis performance
data.

v2 (Jakub):
 - update license headers and add SPDX tags.
====================
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add bash completion for the "visual" keyword used for dumping the CFG of
eBPF programs with bpftool. Make sure we only complete with this keyword
when we dump "xlated" (and not "jited") instructions.
Acked-by: NJiong Wang <jiong.wang@netronome.com>
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch adds new command-line option for visualizing the xlated eBPF
sequence.

Documentations are updated accordingly.

Usage:

  bpftool prog dump xlated id 2 visual
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch let bpftool print .dot graph file into stdout.

This graph is generated by the following steps:

  - iterate through the function list.
  - generate basic-block(BB) definition for each BB in the function.
  - draw out edges to connect BBs.

This patch is the initial support, the layout and decoration of the .dot
graph could be improved.

Also, it will be useful if we could visualize some performance data from
static analysis.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch adds out edges for each basic-block. We will need these out
edges to finish the .dot graph drawing.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch partition basic-block for each function in the CFG. The
algorithm is simple, we identify basic-block head in a first traversal,
then second traversal to identify the tail.

We could build extended basic-block (EBB) in next steps. EBB could make the
graph more readable when the eBPF sequence is big.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch detect all sub-programs from the eBPF sequence and keep the
information in the new CFG data structure.

The detection algorithm is basically the same as the one in verifier except
we need to use insn->off instead of insn->imm to get the pc-relative call
offset. Because verifier has modified insn->off/insn->imm during finishing
the verification.

Also, we don't need to do some sanity checks as verifier has done them.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch factors out those code of dumping xlated eBPF instructions into
xlated_dumper.[h|c].

They are quite independent dumper functions, so better to be kept
separately.

New dumper support will be added in later patches in this set.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

It is obvious we could use 'else if' instead of start a new 'if' in the
touched code.
Signed-off-by: NJiong Wang <jiong.wang@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

recvmmsg does not call ___sys_recvmsg when sk_err is set.
That is fine for normal reads but, for MSG_ERRQUEUE, recvmmsg
should always call ___sys_recvmsg regardless of sk->sk_err to
be able to clear error queue. Otherwise, users are not able to
drain the error queue using recvmmsg.
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: Reduce duplication

This patch series reduces the duplication among 10G PHY drivers that just
essentially stub most functions, but do that while replicating what the existing
generic functions do.

Changes in v3:

- removed unused "reg" variable in teranetics.c
- fixed subject for patch 5 since we actually use gen10g_no_soft_reset()

Changes in v2:

- rename gen10g_soft_reset() to gen10g_no_soft_reset() to better illustrate
  what it does (or does not)
- removed stray comment in marvell10g.c
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We do the same thing as the generic function: nothing, so utilize it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

cortina_soft_reset() does the same thing as gen10g_soft_reset(), and
cortina_config_aneg() is actually doing what gen10g_config_init() does
for 10G capable PHYs.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of
duplicating that code, and switch to gen10g_* functions where
appropriate instead of maintaining identical copies doing nothing.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

In order to remove a fair amount of duplication in the different 10G PHY
drivers, export all gen10g_* functions to be able to make use of those.
While we are at it, rename gen10g_soft_reset() to gen10g_no_soft_reset()
to illustrate what it does.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The driver duplicates what the generic function does, so use the generic
function intead.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>