Use schedule_work() to avoid down()-in-timer-handler problem.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Use ~, not !

- Remove unneeded cast
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the patch to support TPMs on power ppc hardware.  It has been
reworked as requested to remove the need for messing with the io page mask
by just using ioremap.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some work is needed in the tpm device driver to discover the TPM out of the
device tree rather than based on set address on Power PPC.  This patch
exports a couple of functions for the parsing.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Wasn't checking return error and forgot to free in some case.
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

allnoconfig:

In file included from fs/super.c:28:
include/linux/acct.h:173: warning: `TICK_NSEC' is not defined
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ext2_warning() already adds a newline.
Signed-off-by: NJohann Lombardi <johann.lombardi@bull.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

put_ioctx's refcount debugging was doing an atomic_read after dropping its
reference when it wasn't the last ref, leaving a tiny race for another freeing
thread to sneak into.  This shifts the debugging before the ops, uses BUG_ON,
and reformats the defines a little.  Sadly, moving to inlines increased the
code size but this change decreases the code size by a whole 9 bytes :)
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

aio: replace locking comments with assert_spin_locked()
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sync iocbs have a life cycle that don't need a kioctx.  Their retrying, if
any, is done in the context of their owner who has allocated them on the
stack.

The sole user of a sync iocb's ctx reference was aio_complete() checking for
an elevated iocb ref count that could never happen.  No path which grabs an
iocb ref has access to sync iocbs.

If we were to implement sync iocb cancelation it would be done by the owner of
the iocb using its on-stack reference.

Removing this chunk from aio_complete allows us to remove the entire kioctx
instance from mm_struct, reducing its size by a third.  On a i386 testing box
the slab size went from 768 to 504 bytes and from 5 to 8 per page.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes deadlock of stop_machine() vs.  synchronous IPI send.  The
problem is that stop_machine() disables interrupts before disabling
preemption on other CPUs.  So if another CPU is preempted and then calls
something like flush_tlb_all() it will deadlock with CPU doing
stop_machine() and which can't process IPI due to disabled IRQs.

I changed stop_machine() to do the same things exactly as it does on other
CPUs, i.e.  it should disable preemption first on _all_ CPUs including
itself and only after that disable IRQs.
Signed-off-by: NKirill Korotaev <dev@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Andrey Savochkin" <saw@sawoct.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's deprecated. Use "%s", __FUNCTION__ instead.
Signed-off-by: NClemens Buchacher <drizzd@aon.at>
Signed-off-by: NMaximilian Attems <janitor@sternwelten.at>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce an atomic_inc_not_zero operation.  Make this a special case of
atomic_add_unless because lockless pagecache actually wants
atomic_inc_not_negativeone due to its offset refcount.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce an atomic_cmpxchg operation.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Make cmpxchg generally available on the i386 platform.

- Provide emulation of cmpxchg suitable for uniprocessor if built and run on
  386.

From: Christoph Lameter <clameter@sgi.com>

- Cut down patch and small style changes.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the box usable for interactive work when running the RCU torture test,
by renicing the RCU torture-test threads to +19 by default.  Kthreads run
at nice -5 by default.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPaul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently per_cpu_ptr() doesn't really do anything with 'cpu' in the UP
case.  This is problematic in the cases where this is the only place the
variable is referenced:

  CC      kernel/workqueue.o
  kernel/workqueue.c: In function `current_is_keventd':
  kernel/workqueue.c:460: warning: unused variable `cpu'
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fs/proc/task_mmu.c:198:33: warning: Using plain integer as NULL pointer
Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update synclink to use DMA mapping API.  This removes warning about
isa_virt_to_bus() usage on architectures other than i386
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes lost referrence on ext3 current handle in
ext3_journalled_writepage().
Signed-Off-By: NDenis Lunev <den@sw.ru>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch reverts commit c33880aa since
it's not needed anymore. As pointed out by Roland McGrath the real fix
is to deliver all signals before returning to user space.
See http://www.ussg.iu.edu/hypermail/linux/kernel/0509.2/0683.html
A fix for s390 has been merged.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some exit path bugs in the daemon driver.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The access_ok_tt() macro is bogus, in that a read access is unconditionally
considered valid.

I couldn't find in SCM logs the introduction of this check, but I went back to
2.4.20-1um and the definition was the same.

Possibly this was done to avoid problems with missing set_fs() calls, but
there can't be any I think because they would fail with SKAS mode.
TT-specific code is still to check.

Also, this patch joins common code together, and makes the "address range
wrapping" check happen for all cases, rather than for only some.

This may, possibly, be reoptimized at some time, but the current code doesn't
seem clever, just confused.

* Important: I've also had to change references to access_ok_{tt,skas} back to
  access_ok - the kernel wasn't that happy otherwise.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since the 4th param is unused, remove it altogether.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We were using a long series of (stupid) wrappers which all call
generic_console_write().  Since the wrappers only change the 4th param, which
is unused by the called proc, remove them and call generic_console_write()
directly.

If needed at any time in the future to reintroduce this stuff, the member
could be moved to a generic struct, to avoid this duplicated handling.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

printk clears the host errno (I verified this in debugging and it's reasonable
enough, given that it ends via a write call on some fd, especially since
printk() goes on /dev/tty0 which is often the host stdout).  So save errno
earlier.  There's no reason to change the printk calls to use -err rather than
errno - the assignment can't clear errno.

And in the first failure path, we used to return 0 too (and this time more
clearly), which is totally wrong.  0 is a success fd, which is then registered
and gives a "registering fd twice" warning.

Finally, fix up some whitespace.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A few fixups - show the new submenu only for x86 subarchitecture (it does not
make sense to show it for x86_64 users) and remove X86_CMPXCHG, which is now a
duplicate of Kconfig.i386, even though Kconfig doesn't complain (we also miss
the dependency on !M386 CPU).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove a stone-age comment (UM *does* have a MMU, i.e.  the host), and fix a
dependency (introduced in commit 02edeb58) to
do what was intended.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The below warning was added in place of pte_mkyoung(); if (is_write)
pte_mkdirty();

In fact, if the PTE is not marked young/dirty, our dirty/accessed bit
emulation would cause the TLB permission not to be changed, and so we'd loop,
and given we don't support preemption yet, we'd busy-hang here.

However, I've seen this warning trigger without crashes during a loop of
concurrent kernel builds, at random times (i.e. like a race condition), and I
realized that two concurrent faults on the same page, one on read and one on
write, can trigger it. The read fault gets serviced and the PTE gets marked
writable but clean (it's possible on a shared-writable mapping), while the
generic code sees the PTE was already installed and returns without action. In
this case, we'll see another fault and service it normally.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In Uml, many definitions are borrowed from underlying subarch headers (with
#include <asm/arch/stuff.h>).  And it has become annoying to keep switching
tag files all time, so by default index the underlying subarch headers too.
Btw, it adds negligible space to the tags file (less than 1M surely, IIRC it
was around 500k over 40M).

Finally, preserve the ALLSOURCE_ARCHS command line option (I hope) - if it is
set, it is used for headers too as before.  But check my construct please, I
didn't test this.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: NJeff Dike <jdike@addtoit.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove task_work structure, use the standard thread flags functions and use
shifts in entry.S to test the thread flags.  Add a few local labels to entry.S
to allow gas to generate short jumps.

Finally it changes a number of inline functions in thread_info.h to macros to
delay the current_thread_info() usage, which requires on m68k a structure
(task_struct) not yet defined at this point.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Cc: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

a) added embedded thread_info [m68k processor.h]

b) added missing symbols in asm-offsets.c

c) task_thread_info() and friends in asm-m68k/thread_info.h

d) made m68k thread_info.h included by m68k processor.h, not the other way
   round.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

a) in smp_lock.h #include of sched.h and spinlock.h moved under #ifdef
   CONFIG_LOCK_KERNEL.

b) interrupt.h now explicitly pulls sched.h (not via smp_lock.h from
   hardirq.h as it used to)

c) in three more places we need changes to compensate for (a) - one place
   in arch/sparc needs string.h now, hardirq.h needs forward declaration of
   task_struct and preempt.h needs direct include of thread_info.h.

d) thread_info-related helpers in sched.h and thread_info.h put under
   ifndef __HAVE_THREAD_FUNCTIONS.  Obviously safe.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

encapsulates the rest of arch-dependent operations with thread_info access.
Two new helpers - setup_thread_stack() and end_of_stack().  For normal case
the former consists of copying thread_info of parent to new thread_info and
the latter returns pointer immediately past the end of thread_info.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

new helper - task_thread_info(task).  On platforms that have thread_info
allocated separately (i.e.  in default case) it simply returns
task->thread_info.  m68k wants (and for good reasons) to embed its thread_info
into task_struct.  So it will (in later patch) have task_thread_info() of its
own.  For now we just add a macro for generic case and convert existing
instances of its body in core kernel to uses of new macro.  Obviously safe -
all normal architectures get the same preprocessor output they used to get.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=5546

The cpu_khz global is not initialized and remains 0 if you boot with
clock=pit, even if the processor does have a TSC.  This may have bad
ramifications since the variable is used in various places scattered around
the kernel, though I didn't check them all to see if they can tolerate cpu_khz
= 0.  You can observe the problem by doing "cat /proc/cpuinfo"; the cpu MHz
line says 0.000.

The fix is trivial; call init_cpu_khz() from init_pit(), just as it's called
from the timers/timer_foo.c:init_foo() for other values of foo.

Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instruction pointer comparisons for the NMI on debug stack check/fixup
were incorrect.

From: Jan Beulich <jbeulich@novell.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Acked-by: N"Seth, Rohit" <rohit.seth@intel.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch contains the following cleanups:
- make a needlessly global function static
- every file should include the headers containing the prototypes for
  it's global functions
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/powerpc/xmon/xmon.c:525: error: syntax error before "xmon_irq"
arch/powerpc/xmon/xmon.c:526: warning: return type defaults to `int'
arch/powerpc/xmon/xmon.c: In function `xmon_irq':
arch/powerpc/xmon/xmon.c:532: error: `IRQ_HANDLED' undeclared (first use in this function)
arch/powerpc/xmon/xmon.c:532: error: (Each undeclared identifier is reported only once
arch/powerpc/xmon/xmon.c:532: error: for each function it appears in.)

Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>